Citroen e-C4 Charging at Allego

Citroen e-C4 Charger Won't Start? Step-by-Step Fix

Your Citroen e-C4 is connected to the charger but nothing is happening. No power, no progress, and maybe an error flashing on the charger screen. This is a common problem at public charging stations and it usually has a straightforward fix.

Symptoms

• CCS2 connector inserted but no charging session begins
• Charger screen shows an error code or connection failure
• The e-C4's charge port indicator does not light up or blinks red
• Charger starts to initialize but disconnects within seconds
• Type 2 connector locks in at an AC station but no power flows

What to Do

1. 1

   Complete the authentication step

   Tap your RFID card, start a session in the charging app, or use contactless payment. Follow the charger's on-screen instructions. Some networks require authentication before plugging in, others after.

2. 2

   Unplug and firmly reseat the connector

   Pull the CCS2 or Type 2 connector out completely and reinsert it straight into the charge port with a firm push until it clicks. Keep the cable aligned and support its weight.

3. 3

   Disable scheduled charging on the touchscreen

   Open the charging settings on the e-C4's central touchscreen. Turn off any scheduled or deferred charging mode so the car accepts power immediately.

4. 4

   Clean the charge port

   Check the charge port on the left rear for dirt, salt, or ice. Wipe the contacts with a dry cloth. In freezing weather, gently clear any ice from the port opening and door.

5. 5

   Lock and unlock the vehicle to reset

   Use the key fob or the MyCitroen app to lock the car, wait 10 seconds, then unlock it. This resets the charge port controller. Try plugging in again.

6. 6

   Try a different charger

   Move to another stall at the same station or find a nearby alternative. Some charger faults affect only one unit while others at the same site work fine.

Citroen e-C4: Charger Payment Failed? Quick Fixes

Your Citroen e-C4 is plugged in, but the payment is not going through. RFID rejected, app error, or bank card declined. This is entirely a charger and payment issue, not a car problem. Here is how to sort it out and start charging.

Symptoms

• RFID card rejected with an error beep or message
• Charging network app shows a payment error or session failure
• Contactless bank card declined at the charger terminal
• Pre-authorization hold appears but no charging session starts
• Charger starts briefly then stops with a billing error

What to Do

1. 1

   Check accepted payment methods on the charger

   Look at the charger's display and body for logos showing which RFID networks, apps, or card payment options are accepted.

2. 2

   Try a different payment method

   Switch from RFID to the network app, or from the app to a contactless bank card. Always carry at least two options.

3. 3

   Check your bank card balance

   Open your banking app and confirm you have enough available balance for a pre-authorization hold. Some chargers hold up to 80 EUR upfront.

4. 4

   Update or restart the charging app

   Check for updates, close and reopen the app, and look for any stuck open sessions. Log out and back in if the problem persists.

5. 5

   Use the charger's built-in card reader

   Look for a contactless card reader on the charger. More European stations now offer direct bank card payment, which bypasses RFID and app issues.

6. 6

   Call the support number on the charger

   Every public charger displays a support number. The operator can sometimes start a session remotely or diagnose the payment issue from their end.

Citroen e-C4 Charging Too Slow? How to Fix It Now

Your Citroen e-C4 can charge at up to 100 kW on a DC fast charger, but you might be getting far less. The 50.8 kWh NMC battery sits on the Stellantis e-CMP platform, and its charging behavior has some known limitations. Here is what holds back your speed and how to work around it.

Symptoms

• DC charging power stays well below 100 kW even at a high-power station
• Charging speed drops steeply before reaching 50% state of charge
• AC charging at home maxes out at 3.6 kW instead of 11 kW
• The touchscreen shows an estimated time much longer than expected
• Cold weather charging sessions take nearly twice as long as summer sessions

What to Do

1. 1

   Drive at highway speed for 15-20 minutes before fast charging

   Since the e-C4 has no battery preconditioning, active driving is the best way to warm the battery. Highway driving before your charging stop makes a meaningful difference in cold weather charging speeds.

2. 2

   Arrive at the charger between 10% and 20%

   The e-C4 charges fastest at low state of charge. Plan your stop so you arrive around 10-15% to take advantage of peak speeds. The difference between 10% and 50% arrival can be 30-40 kW.

3. 3

   Pick a charger stall that is not sharing power

   Check if two CCS2 cables come from one cabinet. Choose the stall where the other connector is free. This ensures you get the full power output from the charger.

4. 4

   Verify your home AC setup

   Check the power reading on the e-C4's touchscreen during a home AC charge. If it shows about 3.6 kW, you are on single-phase power. A three-phase upgrade unlocks the full 11 kW.

5. 5

   Monitor the charging screen

   During DC charging, watch the current power on the touchscreen. If it starts low, the battery may be warming up. Give it 5-10 minutes. Power should gradually increase as the battery temperature rises.

6. 6

   Stop DC charging at 80% on road trips

   The last 20% takes disproportionately long. On longer drives, unplug at 80% and drive to the next charging stop. You will save significant time overall.

Allego app not starting a session

You open the Allego app, select the charger, tap 'Start,' and nothing happens. The app may spin, show an error, or claim the charger is offline even though the screen in front of you says otherwise.

Symptoms

• Allego app shows a loading spinner that never finishes
• 'Charger unavailable' in the app but the physical charger looks operational
• App crashes when tapping 'Start Charging'
• Session appears to start in the app but the charger does not begin delivering power

How to Fix It

1. 1

   Make sure you selected the correct charger and connector

   Allego stations often have multiple charging points. Each one has its own ID, usually printed on a sticker near the connector. Match this ID to the one shown in the Allego app. Selecting the wrong point is the most common reason a session will not start.

2. 2

   Plug in the cable before starting the session in the app

   Most Allego chargers require the cable to be connected to your car first. The charger needs to detect a vehicle before it will accept a start command from the app.

3. 3

   Close and reopen the Allego app

   Force-close the app completely (swipe it away from your recent apps), wait a few seconds, and reopen it. Try starting the session again.

4. 4

   Scan the QR code on the charger instead

   Most Allego chargers have a QR code that opens a web-based payment page. This works independently of the Allego app and lets you pay with a credit card without needing an account.

5. 5

   Use an RFID card from a roaming provider

   If you have an RFID card from a provider like Shell Recharge, Plugsurfing, or Chargemap, hold it against the reader on the charger. This bypasses the Allego app entirely.

Charger not appearing in the Allego app

You are standing in front of a physical Allego charger, but it does not show up on the Allego app map. The charger is clearly operational and other drivers are using it.

Symptoms

• Charger location is missing from the the Allego app map entirely
• App shows the location but with zero available connectors
• Charger appears under a different brand name in other apps but not in the Allego app
• Newly installed charger not yet listed

How to Fix It

1. 1

   Check if the charger is operated under a different brand

   Allego operates under various local labels in different countries. The charger might be listed under the local brand name rather than 'Allego' in some apps. Look for a sticker or sign on the charger that shows the operator name and EVSE ID.

2. 2

   Search by charger ID instead of location

   In the Allego app, try the search function and enter the charger's EVSE ID (printed on the unit, usually starting with a country code like DE*, NL*, or FR*). This can find chargers that are not correctly placed on the map.

3. 3

   Use the QR code on the charger

   Scan the QR code on the charger with your phone camera. This will open a direct link to start a session, even if the charger is missing from the app map.

4. 4

   Try a different charging app

   Allego chargers are accessible through many roaming providers. Open an app like Chargemap, Shell Recharge, or Plugsurfing and search for the same location. You may be able to start the session there.

Third-party RFID card not accepted

You hold your RFID card from another provider against the reader and the charger beeps but rejects it, or nothing happens at all.

Symptoms

• Charger beeps once but displays 'Card not recognized'
• No reaction when holding the RFID card to the reader
• Card works at other networks but not at this Allego charger
• 'Authorization failed' message on the charger screen

How to Fix It

1. 1

   Check if your roaming provider covers Allego

   Not all RFID providers have roaming agreements with Allego. Check your provider's app or website to confirm Allego is listed in their coverage. Some providers cover only certain Allego locations.

2. 2

   Hold the card flat and steady for 3 seconds

   Do not wave or tap the card. Place it flat against the reader and hold it still. Allego readers can be slower to respond than some other networks.

3. 3

   Try a different position on the reader

   The RFID antenna inside the reader has a specific sweet spot. Move your card slowly across the reader surface until you get a response. On some Allego chargers, the reader is on the right side panel rather than the front.

4. 4

   Check your RFID card is activated

   Some providers require you to activate your RFID card in their app before first use. Open your provider's app and look for card activation or card management settings.

5. 5

   Fall back to QR code or Allego app

   If your RFID card will not work, scan the QR code on the charger for direct credit card payment, or download the Allego app and register to start the session digitally.

Long delay before charging actually starts

You have authenticated and the charger says it is starting, but 30 seconds, sometimes over a minute, passes before any power flows to your car.

Symptoms

• Charger screen says 'Starting' or 'Initializing' for over 30 seconds
• Car shows 'Waiting for charger' or 'Preparing'
• Power reading stays at 0 kW for a full minute after authentication
• You wonder if you should unplug and try again

How to Fix It

1. 1

   Wait at least 90 seconds before taking action

   Allego high-power chargers perform a communication handshake with your car before delivering power. This includes safety checks, voltage negotiation, and isolation testing. A 30-60 second delay is normal, especially on 350 kW units.

2. 2

   Do not unplug during the initialization phase

   Unplugging and re-plugging resets the entire handshake process. If the charger screen shows any progress (status messages, icons changing), let it complete.

3. 3

   Check if your car's charge port is locked

   The connector should be locked into your car's charge port during initialization. If you can wiggle the connector freely, it may not be fully inserted. Push it in firmly and listen for the lock click.

4. 4

   If nothing happens after 2 minutes, restart the session

   Unplug the connector, wait 10 seconds, plug it back in, and authenticate again. If the delay repeats, try a different connector or charger at the same station.

Charging power much lower than advertised

The charger is rated for 350 kW, but your car is only pulling 50 kW or less. The session is working, just far slower than expected.

Symptoms

• Car or charger display shows 40-80 kW on a 350 kW charger
• Estimated charge time is much longer than expected
• Power started high but dropped dramatically within minutes
• Other cars at the same station seem to charge faster

How to Fix It

1. 1

   Check your battery level

   DC charging slows significantly above 60-70% state of charge on most cars. If your battery is already at 65% or higher, the reduced speed is your car protecting its battery, not a charger problem.

2. 2

   Check your car's maximum DC charging rate

   A 350 kW charger can deliver up to 350 kW, but your car decides how much to accept. Many EVs top out at 100-150 kW. Check your car's specifications for its maximum DC charging speed.

3. 3

   Consider battery temperature

   Cold batteries charge slowly. If you have been parked for hours in cold weather without preconditioning, your car may limit charging to 30-60 kW until the battery warms up. Some cars let you precondition the battery by setting the charger as your navigation destination.

4. 4

   Check if the station is power-sharing

   Some Allego stations share power between multiple chargers. If three cars are charging simultaneously, each one may get less than the maximum. This is normal at shared-power sites.

5. 5

   Try a different connector at the same station

   Occasionally one connector delivers less power due to a hardware limitation. If you are getting unusually low power even at a low battery level, unplug and try the next unit.