Allego Charger Not Working?

Symptoms

• Smoov app shows a loading spinner that never finishes
• 'Charger unavailable' in the app but the physical charger looks operational
• App crashes when tapping 'Start Charging'
• Session appears to start in the app but the charger does not begin delivering power

How to Fix It

1. 1

   Make sure you selected the correct charger and connector

   Allego stations often have multiple charging points. Each one has its own ID, usually printed on a sticker near the connector. Match this ID to the one shown in the Smoov app. Selecting the wrong point is the most common reason a session will not start.

2. 2

   Plug in the cable before starting the session in the app

   Most Allego chargers require the cable to be connected to your car first. The charger needs to detect a vehicle before it will accept a start command from the app.

3. 3

   Close and reopen the Smoov app

   Force-close the app completely (swipe it away from your recent apps), wait a few seconds, and reopen it. Try starting the session again.

4. 4

   Scan the QR code on the charger instead

   Most Allego chargers have a QR code that opens a web-based payment page. This works independently of the Smoov app and lets you pay with a credit card without needing an account.

5. 5

   Use an RFID card from a roaming provider

   If you have an RFID card from a provider like Shell Recharge, Plugsurfing, or Chargemap, hold it against the reader on the charger. This bypasses the Smoov app entirely.

Symptoms

• Charger location is missing from the Smoov map entirely
• App shows the location but with zero available connectors
• Charger appears under a different brand name in other apps but not in Smoov
• Newly installed charger not yet listed

How to Fix It

1. 1

   Check if the charger is operated under a different brand

   Allego operates under various local labels in different countries. The charger might be listed under the local brand name rather than 'Allego' in some apps. Look for a sticker or sign on the charger that shows the operator name and EVSE ID.

2. 2

   Search by charger ID instead of location

   In the Smoov app, try the search function and enter the charger's EVSE ID (printed on the unit, usually starting with a country code like DE*, NL*, or FR*). This can find chargers that are not correctly placed on the map.

3. 3

   Use the QR code on the charger

   Scan the QR code on the charger with your phone camera. This will open a direct link to start a session, even if the charger is missing from the app map.

4. 4

   Try a different charging app

   Allego chargers are accessible through many roaming providers. Open an app like Chargemap, Shell Recharge, or Plugsurfing and search for the same location. You may be able to start the session there.

Symptoms

• Charger beeps once but displays 'Card not recognized'
• No reaction when holding the RFID card to the reader
• Card works at other networks but not at this Allego charger
• 'Authorization failed' message on the charger screen

How to Fix It

1. 1

   Check if your roaming provider covers Allego

   Not all RFID providers have roaming agreements with Allego. Check your provider's app or website to confirm Allego is listed in their coverage. Some providers cover only certain Allego locations.

2. 2

   Hold the card flat and steady for 3 seconds

   Do not wave or tap the card. Place it flat against the reader and hold it still. Allego readers can be slower to respond than some other networks.

3. 3

   Try a different position on the reader

   The RFID antenna inside the reader has a specific sweet spot. Move your card slowly across the reader surface until you get a response. On some Allego chargers, the reader is on the right side panel rather than the front.

4. 4

   Check your RFID card is activated

   Some providers require you to activate your RFID card in their app before first use. Open your provider's app and look for card activation or card management settings.

5. 5

   Fall back to QR code or Smoov app

   If your RFID card will not work, scan the QR code on the charger for direct credit card payment, or download the Smoov app and register to start the session digitally.

Symptoms

• Charger screen says 'Starting' or 'Initializing' for over 30 seconds
• Car shows 'Waiting for charger' or 'Preparing'
• Power reading stays at 0 kW for a full minute after authentication
• You wonder if you should unplug and try again

How to Fix It

1. 1

   Wait at least 90 seconds before taking action

   Allego high-power chargers perform a communication handshake with your car before delivering power. This includes safety checks, voltage negotiation, and isolation testing. A 30-60 second delay is normal, especially on 350 kW units.

2. 2

   Do not unplug during the initialization phase

   Unplugging and re-plugging resets the entire handshake process. If the charger screen shows any progress (status messages, icons changing), let it complete.

3. 3

   Check if your car's charge port is locked

   The connector should be locked into your car's charge port during initialization. If you can wiggle the connector freely, it may not be fully inserted. Push it in firmly and listen for the lock click.

4. 4

   If nothing happens after 2 minutes, restart the session

   Unplug the connector, wait 10 seconds, plug it back in, and authenticate again. If the delay repeats, try a different connector or charger at the same station.

Symptoms

• Car or charger display shows 40-80 kW on a 350 kW charger
• Estimated charge time is much longer than expected
• Power started high but dropped dramatically within minutes
• Other cars at the same station seem to charge faster

How to Fix It

1. 1

   Check your battery level

   DC charging slows significantly above 60-70% state of charge on most cars. If your battery is already at 65% or higher, the reduced speed is your car protecting its battery, not a charger problem.

2. 2

   Check your car's maximum DC charging rate

   A 350 kW charger can deliver up to 350 kW, but your car decides how much to accept. Many EVs top out at 100-150 kW. Check your car's specifications for its maximum DC charging speed.

3. 3

   Consider battery temperature

   Cold batteries charge slowly. If you have been parked for hours in cold weather without preconditioning, your car may limit charging to 30-60 kW until the battery warms up. Some cars let you precondition the battery by setting the charger as your navigation destination.

4. 4

   Check if the station is power-sharing

   Some Allego stations share power between multiple chargers. If three cars are charging simultaneously, each one may get less than the maximum. This is normal at shared-power sites.

5. 5

   Try a different connector at the same station

   Occasionally one connector delivers less power due to a hardware limitation. If you are getting unusually low power even at a low battery level, unplug and try the next unit.