BYD Dolphin Charging at Recharge

BYD Dolphin Charger Won't Start? Quick Fix Guide

Your BYD Dolphin is plugged in but charging is not starting. The charger might show an error, the car might not respond, or you are stuck on the authentication screen. Most failed charging starts have a simple explanation. Here is how to work through it step by step.

Symptoms

• Charger display shows error after plugging in the CCS2 connector
• Dolphin charge port light stays off or shows a warning color
• Car dashboard indicates no charging activity
• Charger screen stays on authentication or welcome screen
• Type 2 cable locks but no power flows

What to Do

1. 1

   Read the charger display

   Check for error messages, prompts, or status indicators. If it asks for authentication, that is your next step. If it shows a fault, the charger is the problem.

2. 2

   Unplug and replug the connector

   Remove the CCS2 or Type 2 connector completely, wait 10-15 seconds, and push it back in firmly. Listen for the locking click.

3. 3

   Authenticate with the charger

   Tap your RFID card, start the session in the app, or use contactless payment. Try authenticating both before and after plugging in.

4. 4

   Clean the charge port

   Inspect the Dolphin's charge port for debris, ice, or moisture. Wipe it clean with a dry cloth. In winter, gently remove any ice buildup.

5. 5

   Check for charging schedules

   In the Dolphin's settings, look for any scheduled or delayed charging options. Disable them to allow immediate charging.

6. 6

   Try a different stall or station

   If the charger is at fault, move to another stall or find an alternative station using your charging app.

BYD Dolphin Charging Payment Failed? Fix It Here

Your BYD Dolphin is plugged in and ready, but the payment is not going through. Whether it is an RFID card, an app, or contactless, payment problems are one of the most common reasons a charging session fails. Here is how to get it working.

Symptoms

• RFID card does not register when tapped on the charger
• Network app shows payment error or declined transaction
• Contactless bank card rejected at the terminal
• Charger asks for authentication but does not accept anything
• Session starts then immediately stops due to payment failure

What to Do

1. 1

   Check accepted payment methods

   Look at the charger for payment logos and instructions. Determine whether it accepts RFID, app payments, contactless cards, or specific network cards only.

2. 2

   Try the network's app

   Scan the QR code or find the app in your phone's app store. Create an account, add payment, and start the session through the app.

3. 3

   Switch payment methods

   Try a different card, a roaming provider (Plugsurfing, Shell Recharge, Chargemap), or a different app. Having multiple options increases your success rate.

4. 4

   Check your bank for declines

   Open your banking app to see if a pre-authorization was blocked. Approve it or try a different card with a higher available balance.

5. 5

   Try another stall

   The card reader on one stall may be faulty. Move to the next stall and try again.

6. 6

   Find a nearby alternative

   If nothing works, search for a different station where your payment methods are confirmed to work.

BYD Dolphin Charging Slowly? LFP Cold Weather Tips

Your BYD Dolphin is not charging as fast as you expected. With a maximum DC speed of 88kW and an LFP battery, the Dolphin has some specific quirks. LFP chemistry is safe to charge to 100% daily, but it is more sensitive to cold temperatures than NMC. Without preconditioning, winter performance takes a real hit. Here is what affects your speed.

Symptoms

• DC charging well below 88kW even on a capable charger
• Extremely slow charging in cold weather, sometimes under 20kW
• AC charging stuck below 11kW
• Charging slows significantly above 60% SOC
• First charge of the day in winter is much slower than subsequent ones

What to Do

1. 1

   Check the outside temperature

   If it is below 10C, cold is very likely the primary issue. LFP batteries lose charging speed faster than NMC in cold. Below 0C, expect dramatically slower charging.

2. 2

   Drive longer before fast charging in cold weather

   Without preconditioning, highway driving for 30-45 minutes before a DC stop is the best way to warm the Dolphin's LFP battery. A short city drive is not enough.

3. 3

   Check the charger's power rating

   Verify the charger is rated at 100kW or higher to access the Dolphin's full 88kW capability. A 50kW charger is the max you will get regardless of conditions.

4. 4

   Charge at a lower SOC

   Arrive between 10-20% for the fastest charging speed. Avoid stopping when you are already at 60-70%, as the taper means much slower speeds.

5. 5

   Pick a stall without power sharing

   Choose a charger where no adjacent car is charging. Power sharing can cut your speed in half.

6. 6

   For AC, ensure 3-phase connection

   Use a 3-phase Type 2 cable on an 11kW charger to reach the Dolphin's full AC speed. Single-phase limits you to about 3.6kW.

Charger stuck in "preparing" state

You authenticated successfully, the charger says "preparing," but it never starts delivering power. This is one of the most reported issues on Recharge stations, especially at older units.

Symptoms

• Charger screen shows "Preparing" or "Initializing" for more than two minutes
• Your car's charging indicator does not activate
• The Recharge app shows the session as active but 0 kW delivered
• The charger fan spins up but no power flows

How to Fix It

1. 1

   Wait up to three minutes

   Some Recharge units, particularly the 300kW stations, take longer to complete the power handshake with your car. Give it a full three minutes before taking action.

2. 2

   Unplug and reconnect

   Remove the CCS2 connector, wait 15 seconds, then plug it back in firmly. This resets the communication between your car and the charger.

3. 3

   Stop the session in the Recharge app and start a new one

   Open the Recharge app, tap Stop on the active session, wait for it to fully end, then start a new session on the same charger. This clears any stuck state on the backend.

4. 4

   Try the other connector on the same unit

   Many Recharge stations have two CCS2 connectors. If one is stuck, the other connector on the same unit often works fine.

5. 5

   Use a different authentication method

   If you started with the app, try your RFID card instead, or vice versa. Sometimes the issue is with the authentication path, not the charger hardware.

Old Fortum branding causes app scan failure

Recharge was originally part of Fortum's charging operations before being spun off as a separate company. Some older stations still display Fortum logos and QR codes. Scanning an old Fortum QR code with the Recharge app may not work, or it may redirect to a dead Fortum page.

Symptoms

• QR code on the charger opens a Fortum website or shows an error
• Recharge app says "Charger not found" after scanning
• Station ID on the physical unit does not match what the Recharge app expects
• The charger has Fortum branding but is listed as Recharge in third-party apps

How to Fix It

1. 1

   Ignore the QR code and search by station name in the Recharge app

   Open the Recharge app, use the map or search to find the station by location. The charger will appear under its Recharge name even if the physical unit still says Fortum.

2. 2

   Enter the charger ID manually

   Look for a numeric ID on the charger, often printed on a sticker near the connector. In the Recharge app, tap "Enter ID" and type it in directly.

3. 3

   Use RFID or contactless payment instead of the app

   Tap your Recharge RFID card or a contactless bank card on the reader. This bypasses the app entirely and works regardless of the branding on the charger.

4. 4

   Check if contactless is available on this unit

   Not all Recharge stations support contactless bank card payment. Look for a card reader terminal on the charger. If there is no terminal, you will need the app or an RFID card.

RFID card from old Fortum account not recognized

If you had a Fortum Charge & Drive account and RFID card, it may not work automatically on the Recharge network. Some cards were migrated, others were not.

Symptoms

• Tapping your old Fortum RFID card shows "Card not recognized" on the charger
• The charger beeps but does not start a session
• Your Fortum card works on some stations but not others

How to Fix It

1. 1

   Log in to the Recharge app and check your RFID cards

   Open the Recharge app, go to your account settings, and look under RFID cards. If your old Fortum card is not listed, it was not migrated automatically.

2. 2

   Re-register your RFID card

   In the Recharge app, tap "Add RFID card" and follow the steps. You will need the card number printed on the back of your RFID card.

3. 3

   Use the app to start the session while you wait for RFID activation

   RFID card registration can take up to 24 hours to propagate across all stations. Use the app to authenticate in the meantime.

4. 4

   Order a new Recharge RFID card if re-registration fails

   Some older Fortum cards use a chip format that is not compatible. You can order a new Recharge RFID card through the app or website.

Contactless payment not accepted

You are trying to tap your bank card or phone to pay, but the charger does not respond or shows an error. Contactless payment availability varies across Recharge stations.

Symptoms

• No card reader terminal visible on the charger
• Card reader shows "Payment failed" or does not respond to taps
• Apple Pay or Google Pay not recognized
• The charger prompts for an RFID card but you only have a bank card

How to Fix It

1. 1

   Check if this station supports contactless payment

   Look for a separate payment terminal with a contactless symbol. Not all Recharge stations have been upgraded. The Recharge app shows payment options for each station on the station detail page.

2. 2

   Try removing and re-holding your card

   Hold your card flat against the reader for at least three seconds. Some terminals need a longer hold than you might expect. Remove the card fully, then try again.

3. 3

   Fall back to the Recharge app

   If contactless is not working, open the Recharge app and start the session from there. You need a payment method saved in the app.

4. 4

   Try a different card

   Some Visa Electron and certain prepaid cards are not accepted by the payment terminals. A standard Visa or Mastercard debit or credit card usually works.

Charging speed much lower than expected

The station is rated for 300kW, but your car is only pulling 50kW or less. While your car's battery management limits the maximum speed, Recharge stations can also throttle power.

Symptoms

• Charger display shows far less power than the station's rated capacity
• Charging speed drops suddenly mid-session
• Other cars at the same station are also charging slowly
• The Recharge app shows the session but at low power

How to Fix It

1. 1

   Check how many other cars are charging at the same station

   Recharge stations with multiple connectors often share a power cabinet. If two or three cars are charging simultaneously, the available power per car drops. This is normal and not a fault.

2. 2

   Check your battery level

   DC fast charging slows significantly above 80% on most EVs. If your battery is above 70-80%, the slower speed is your car protecting the battery, not a problem with the Recharge station.

3. 3

   Check the temperature

   In cold weather, your car may limit charging speed until the battery warms up. This can take 10-15 minutes of charging before speeds increase. Some cars precondition the battery if you set the charger as a destination in navigation.

4. 4

   Try a different connector at the station

   Individual connectors can have faults that limit power output. If another connector is free, unplug and try it.

5. 5

   Report the issue in the Recharge app

   If the speed is unusually low and none of the above apply, report it through the Recharge app. Tap the active session and look for a "Report issue" option. This helps Recharge identify hardware problems.