BYD Dolphin Charging at EnBW mobility+

BYD Dolphin Charger Won't Start? Quick Fix Guide

Your BYD Dolphin is plugged in but charging is not starting. The charger might show an error, the car might not respond, or you are stuck on the authentication screen. Most failed charging starts have a simple explanation. Here is how to work through it step by step.

Symptoms

• Charger display shows error after plugging in the CCS2 connector
• Dolphin charge port light stays off or shows a warning color
• Car dashboard indicates no charging activity
• Charger screen stays on authentication or welcome screen
• Type 2 cable locks but no power flows

What to Do

1. 1

   Read the charger display

   Check for error messages, prompts, or status indicators. If it asks for authentication, that is your next step. If it shows a fault, the charger is the problem.

2. 2

   Unplug and replug the connector

   Remove the CCS2 or Type 2 connector completely, wait 10-15 seconds, and push it back in firmly. Listen for the locking click.

3. 3

   Authenticate with the charger

   Tap your RFID card, start the session in the app, or use contactless payment. Try authenticating both before and after plugging in.

4. 4

   Clean the charge port

   Inspect the Dolphin's charge port for debris, ice, or moisture. Wipe it clean with a dry cloth. In winter, gently remove any ice buildup.

5. 5

   Check for charging schedules

   In the Dolphin's settings, look for any scheduled or delayed charging options. Disable them to allow immediate charging.

6. 6

   Try a different stall or station

   If the charger is at fault, move to another stall or find an alternative station using your charging app.

BYD Dolphin Charging Payment Failed? Fix It Here

Your BYD Dolphin is plugged in and ready, but the payment is not going through. Whether it is an RFID card, an app, or contactless, payment problems are one of the most common reasons a charging session fails. Here is how to get it working.

Symptoms

• RFID card does not register when tapped on the charger
• Network app shows payment error or declined transaction
• Contactless bank card rejected at the terminal
• Charger asks for authentication but does not accept anything
• Session starts then immediately stops due to payment failure

What to Do

1. 1

   Check accepted payment methods

   Look at the charger for payment logos and instructions. Determine whether it accepts RFID, app payments, contactless cards, or specific network cards only.

2. 2

   Try the network's app

   Scan the QR code or find the app in your phone's app store. Create an account, add payment, and start the session through the app.

3. 3

   Switch payment methods

   Try a different card, a roaming provider (Plugsurfing, Shell Recharge, Chargemap), or a different app. Having multiple options increases your success rate.

4. 4

   Check your bank for declines

   Open your banking app to see if a pre-authorization was blocked. Approve it or try a different card with a higher available balance.

5. 5

   Try another stall

   The card reader on one stall may be faulty. Move to the next stall and try again.

6. 6

   Find a nearby alternative

   If nothing works, search for a different station where your payment methods are confirmed to work.

BYD Dolphin Charging Slowly? LFP Cold Weather Tips

Your BYD Dolphin is not charging as fast as you expected. With a maximum DC speed of 88kW and an LFP battery, the Dolphin has some specific quirks. LFP chemistry is safe to charge to 100% daily, but it is more sensitive to cold temperatures than NMC. Without preconditioning, winter performance takes a real hit. Here is what affects your speed.

Symptoms

• DC charging well below 88kW even on a capable charger
• Extremely slow charging in cold weather, sometimes under 20kW
• AC charging stuck below 11kW
• Charging slows significantly above 60% SOC
• First charge of the day in winter is much slower than subsequent ones

What to Do

1. 1

   Check the outside temperature

   If it is below 10C, cold is very likely the primary issue. LFP batteries lose charging speed faster than NMC in cold. Below 0C, expect dramatically slower charging.

2. 2

   Drive longer before fast charging in cold weather

   Without preconditioning, highway driving for 30-45 minutes before a DC stop is the best way to warm the Dolphin's LFP battery. A short city drive is not enough.

3. 3

   Check the charger's power rating

   Verify the charger is rated at 100kW or higher to access the Dolphin's full 88kW capability. A 50kW charger is the max you will get regardless of conditions.

4. 4

   Charge at a lower SOC

   Arrive between 10-20% for the fastest charging speed. Avoid stopping when you are already at 60-70%, as the taper means much slower speeds.

5. 5

   Pick a stall without power sharing

   Choose a charger where no adjacent car is charging. Power sharing can cut your speed in half.

6. 6

   For AC, ensure 3-phase connection

   Use a 3-phase Type 2 cable on an 11kW charger to reach the Dolphin's full AC speed. Single-phase limits you to about 3.6kW.

Roaming pricing unclear or higher than expected

You started a session through EnBW mobility+ and the per-kWh price was significantly higher than you expected. The same charger costs different amounts at different times, and the pricing logic feels opaque.

Symptoms

• Per-kWh rate on the receipt is higher than the rate shown on the EnBW website
• Same charger location costs more through EnBW mobility+ than through the CPO's own app
• Price differs between two chargers at the same station
• Unexpected 'roaming fee' or 'session fee' on your invoice

How to Fix It

1. 1

   Check the price before you start the session

   In the EnBW mobility+ app, tap on the charger and look for the pricing details before starting. The app shows the per-kWh rate for that specific charger. Prices vary because each CPO sets different roaming rates.

2. 2

   Understand the pricing tiers

   EnBW mobility+ groups chargers into pricing tiers. 'EnBW own' chargers are cheapest, 'roaming standard' is mid-range, and 'roaming plus' (typically high-power chargers from premium CPOs like Ionity) costs more. The tier is usually shown in the charger details.

3. 3

   Compare with the CPO's own app

   If a charger is operated by Ionity, for example, check the Ionity app or website for their direct pricing. Sometimes the CPO's own app or RFID card is cheaper because there is no roaming middleman. If you use that CPO frequently, their own account may save you money.

4. 4

   Consider the EnBW mobility+ tariff you are on

   EnBW offers different tariffs (with and without a monthly fee). The tariff with a monthly fee usually gives lower per-kWh rates. In the app, go to your profile to check which tariff you are on and whether switching would save you money based on your usage.

5. 5

   Watch for idle fees and blocking fees

   Some chargers accessed through EnBW mobility+ charge a per-minute fee after your car finishes charging but the cable is still plugged in. Move your car promptly once charging is complete to avoid these fees.

App not loading charger details

You tap on a charger pin on the map and the detail screen is blank, shows a loading spinner forever, or displays outdated information. You cannot see pricing, availability, or the start button.

Symptoms

• Charger detail page shows a permanent loading spinner
• Availability status not updating (shows 'Available' for hours at a busy station)
• Price information missing from the detail screen
• App shows 'No connection' error when loading charger details

How to Fix It

1. 1

   Check your phone's internet connection

   Charging stations are often in areas with poor cellular coverage, like parking garages, highway rest stops behind concrete walls, or rural areas. Switch between mobile data and Wi-Fi, or walk to a spot with better signal and load the charger details there.

2. 2

   Force-close the app and reopen it

   Swipe the EnBW mobility+ app away from your recent apps list, wait a few seconds, and reopen it. Navigate to the charger again. This clears any stuck network requests.

3. 3

   Search for the charger by ID

   Instead of tapping the map pin, use the search bar in the app and enter the charger's ID or EVSE number (printed on the physical unit). This sometimes loads details that the map view fails to fetch.

4. 4

   Use the QR code on the charger as a backup

   Many chargers have a QR code that opens a direct session start page. Scan it with your phone camera. This page is served by the CPO, not EnBW, and often loads faster.

5. 5

   Clear the app cache

   On Android: Settings, Apps, EnBW mobility+, Storage, Clear Cache. On iOS: delete and reinstall the app (iOS does not offer cache clearing). This resolves issues caused by corrupted local data.

QR code scan not working

You scan the QR code on the charger with the EnBW mobility+ app and it either does not recognize the code, opens a wrong page, or shows an error.

Symptoms

• App says 'QR code not recognized' after scanning
• QR code opens a web page for the CPO's own app instead of EnBW mobility+
• Camera does not focus on the QR code (too dark, code damaged)
• Scan succeeds but the session start page shows an error

How to Fix It

1. 1

   Use the EnBW app's built-in scanner, not your phone camera

   Open the EnBW mobility+ app and use its QR scanner (usually in the top menu or via a scan button on the map screen). Scanning with your phone camera might open the CPO's own page instead of routing through EnBW.

2. 2

   Clean the QR code

   Wipe dirt, rain, or ice off the QR code with your sleeve. Damaged or faded QR codes are common on outdoor chargers. If the code is badly worn, look for a second QR code on a different part of the charger.

3. 3

   Turn on your phone's flashlight

   In dark or shaded areas, the camera cannot read the code. Most QR scanners (including EnBW's) have a flashlight toggle. Enable it for better readability.

4. 4

   Enter the charger ID manually

   If the QR code will not scan, look for the charger's numeric or alphanumeric ID printed nearby. Enter it manually in the EnBW app's search function to find and start the session.

Cannot stop the session from the app

You tap 'Stop Charging' in the EnBW mobility+ app and nothing happens. The session keeps running, your car keeps charging (or has already finished but the session stays active), and you want to unplug and leave.

Symptoms

• 'Stop' button in the app does not respond or shows an error
• Session shows as active in the app even after unplugging
• Charger screen says 'Session active' but your car is full
• You are worried about accumulating idle fees

How to Fix It

1. 1

   Physically unplug the connector from your car

   On most chargers, unplugging the cable ends the session automatically, regardless of what the app says. Unlock your car's charge port (from the car's screen, key fob, or charge port button) and remove the connector.

2. 2

   Wait 2 minutes and check the app again

   There is often a delay between physically ending the session and the app updating. The app depends on the CPO's system sending a 'session ended' signal back through the roaming chain. Give it a moment.

3. 3

   Force-close and reopen the app

   Sometimes the app's session view gets stuck. Force-close it, reopen, and check your session history. The session may already be ended on the backend even if the active session screen was not updating.

4. 4

   Press the stop button on the charger itself

   Many chargers have a physical stop button on the screen or housing. Press it. This sends the stop command directly to the charger hardware without going through the roaming network.

5. 5

   Contact support if you are being billed for a stuck session

   If the session stays 'active' in the app for more than 10 minutes after you have unplugged and driven away, contact EnBW mobility+ support. They can close the session on their end and correct any overcharges.

App is in German and hard to navigate

The EnBW mobility+ app defaults to German. If you do not speak German, navigating menus, understanding pricing details, and finding settings can be frustrating.

Symptoms

• All menus and buttons are in German after installation
• Language setting not obvious in the app
• Error messages appear in German, making troubleshooting difficult
• Pricing terms and tariff explanations are only in German

How to Fix It

1. 1

   Change your phone's system language temporarily

   The EnBW mobility+ app follows your phone's system language. If English is available in the app, switching your phone to English (Settings, General, Language) will switch the app too. You can switch back after you finish.

2. 2

   Check for an English option in the app settings

   Open the app, tap the profile or menu icon (usually three lines or a person icon in the corner), and look for 'Sprache' (Language) or 'Einstellungen' (Settings). Some versions offer English as an option directly.

3. 3

   Use your phone's translate feature on screenshots

   On iOS, take a screenshot and use Live Text to translate. On Android, use Google Lens. This is useful for understanding pricing details or error messages in German.

4. 4

   Consider an alternative roaming app with better language support

   If the language barrier is a persistent problem, apps like Shell Recharge, Plugsurfing, or Chargemap offer similar roaming coverage across Europe and have full English interfaces. They access many of the same chargers.