BYD Dolphin Charging at Osprey

BYD Dolphin Charger Won't Start? Quick Fix Guide

Your BYD Dolphin is plugged in but charging is not starting. The charger might show an error, the car might not respond, or you are stuck on the authentication screen. Most failed charging starts have a simple explanation. Here is how to work through it step by step.

Symptoms

• Charger display shows error after plugging in the CCS2 connector
• Dolphin charge port light stays off or shows a warning color
• Car dashboard indicates no charging activity
• Charger screen stays on authentication or welcome screen
• Type 2 cable locks but no power flows

What to Do

1. 1

   Read the charger display

   Check for error messages, prompts, or status indicators. If it asks for authentication, that is your next step. If it shows a fault, the charger is the problem.

2. 2

   Unplug and replug the connector

   Remove the CCS2 or Type 2 connector completely, wait 10-15 seconds, and push it back in firmly. Listen for the locking click.

3. 3

   Authenticate with the charger

   Tap your RFID card, start the session in the app, or use contactless payment. Try authenticating both before and after plugging in.

4. 4

   Clean the charge port

   Inspect the Dolphin's charge port for debris, ice, or moisture. Wipe it clean with a dry cloth. In winter, gently remove any ice buildup.

5. 5

   Check for charging schedules

   In the Dolphin's settings, look for any scheduled or delayed charging options. Disable them to allow immediate charging.

6. 6

   Try a different stall or station

   If the charger is at fault, move to another stall or find an alternative station using your charging app.

BYD Dolphin Charging Payment Failed? Fix It Here

Your BYD Dolphin is plugged in and ready, but the payment is not going through. Whether it is an RFID card, an app, or contactless, payment problems are one of the most common reasons a charging session fails. Here is how to get it working.

Symptoms

• RFID card does not register when tapped on the charger
• Network app shows payment error or declined transaction
• Contactless bank card rejected at the terminal
• Charger asks for authentication but does not accept anything
• Session starts then immediately stops due to payment failure

What to Do

1. 1

   Check accepted payment methods

   Look at the charger for payment logos and instructions. Determine whether it accepts RFID, app payments, contactless cards, or specific network cards only.

2. 2

   Try the network's app

   Scan the QR code or find the app in your phone's app store. Create an account, add payment, and start the session through the app.

3. 3

   Switch payment methods

   Try a different card, a roaming provider (Plugsurfing, Shell Recharge, Chargemap), or a different app. Having multiple options increases your success rate.

4. 4

   Check your bank for declines

   Open your banking app to see if a pre-authorization was blocked. Approve it or try a different card with a higher available balance.

5. 5

   Try another stall

   The card reader on one stall may be faulty. Move to the next stall and try again.

6. 6

   Find a nearby alternative

   If nothing works, search for a different station where your payment methods are confirmed to work.

BYD Dolphin Charging Slowly? LFP Cold Weather Tips

Your BYD Dolphin is not charging as fast as you expected. With a maximum DC speed of 88kW and an LFP battery, the Dolphin has some specific quirks. LFP chemistry can generally be charged to 100% according to the manufacturer, but it is more sensitive to cold temperatures than NMC. Without preconditioning, winter performance takes a real hit. Here is what affects your speed.

Symptoms

• DC charging well below 88kW even on a capable charger
• Extremely slow charging in cold weather, sometimes under 20kW
• AC charging stuck below 11kW
• Charging slows significantly above 60% SOC
• First charge of the day in winter is much slower than subsequent ones

What to Do

1. 1

   Check the outside temperature

   If it is below 10C, cold is very likely the primary issue. LFP batteries lose charging speed faster than NMC in cold. Below 0C, expect dramatically slower charging.

2. 2

   Drive longer before fast charging in cold weather

   Without preconditioning, highway driving for 30-45 minutes before a DC stop is the best way to warm the Dolphin's LFP battery. A short city drive is not enough.

3. 3

   Check the charger's power rating

   Verify the charger is rated at 100kW or higher to access the Dolphin's full 88kW capability. A 50kW charger is the max you will get regardless of conditions.

4. 4

   Charge at a lower SOC

   Arrive between 10-20% for the fastest charging speed. Avoid stopping when you are already at 60-70%, as the taper means much slower speeds.

5. 5

   Pick a stall without power sharing

   Choose a charger where no adjacent car is charging. Power sharing can cut your speed in half.

6. 6

   For AC, ensure 3-phase connection

   Use a 3-phase Type 2 cable on an 11kW charger to reach the Dolphin's full AC speed. Single-phase limits you to about 3.6kW.