BYD Dolphin Charging at Enel X Way

BYD Dolphin Charger Won't Start? Quick Fix Guide

Your BYD Dolphin is plugged in but charging is not starting. The charger might show an error, the car might not respond, or you are stuck on the authentication screen. Most failed charging starts have a simple explanation. Here is how to work through it step by step.

Symptoms

• Charger display shows error after plugging in the CCS2 connector
• Dolphin charge port light stays off or shows a warning color
• Car dashboard indicates no charging activity
• Charger screen stays on authentication or welcome screen
• Type 2 cable locks but no power flows

What to Do

1. 1

   Read the charger display

   Check for error messages, prompts, or status indicators. If it asks for authentication, that is your next step. If it shows a fault, the charger is the problem.

2. 2

   Unplug and replug the connector

   Remove the CCS2 or Type 2 connector completely, wait 10-15 seconds, and push it back in firmly. Listen for the locking click.

3. 3

   Authenticate with the charger

   Tap your RFID card, start the session in the app, or use contactless payment. Try authenticating both before and after plugging in.

4. 4

   Clean the charge port

   Inspect the Dolphin's charge port for debris, ice, or moisture. Wipe it clean with a dry cloth. In winter, gently remove any ice buildup.

5. 5

   Check for charging schedules

   In the Dolphin's settings, look for any scheduled or delayed charging options. Disable them to allow immediate charging.

6. 6

   Try a different stall or station

   If the charger is at fault, move to another stall or find an alternative station using your charging app.

BYD Dolphin Charging Payment Failed? Fix It Here

Your BYD Dolphin is plugged in and ready, but the payment is not going through. Whether it is an RFID card, an app, or contactless, payment problems are one of the most common reasons a charging session fails. Here is how to get it working.

Symptoms

• RFID card does not register when tapped on the charger
• Network app shows payment error or declined transaction
• Contactless bank card rejected at the terminal
• Charger asks for authentication but does not accept anything
• Session starts then immediately stops due to payment failure

What to Do

1. 1

   Check accepted payment methods

   Look at the charger for payment logos and instructions. Determine whether it accepts RFID, app payments, contactless cards, or specific network cards only.

2. 2

   Try the network's app

   Scan the QR code or find the app in your phone's app store. Create an account, add payment, and start the session through the app.

3. 3

   Switch payment methods

   Try a different card, a roaming provider (Plugsurfing, Shell Recharge, Chargemap), or a different app. Having multiple options increases your success rate.

4. 4

   Check your bank for declines

   Open your banking app to see if a pre-authorization was blocked. Approve it or try a different card with a higher available balance.

5. 5

   Try another stall

   The card reader on one stall may be faulty. Move to the next stall and try again.

6. 6

   Find a nearby alternative

   If nothing works, search for a different station where your payment methods are confirmed to work.

BYD Dolphin Charging Slowly? LFP Cold Weather Tips

Your BYD Dolphin is not charging as fast as you expected. With a maximum DC speed of 88kW and an LFP battery, the Dolphin has some specific quirks. LFP chemistry is safe to charge to 100% daily, but it is more sensitive to cold temperatures than NMC. Without preconditioning, winter performance takes a real hit. Here is what affects your speed.

Symptoms

• DC charging well below 88kW even on a capable charger
• Extremely slow charging in cold weather, sometimes under 20kW
• AC charging stuck below 11kW
• Charging slows significantly above 60% SOC
• First charge of the day in winter is much slower than subsequent ones

What to Do

1. 1

   Check the outside temperature

   If it is below 10C, cold is very likely the primary issue. LFP batteries lose charging speed faster than NMC in cold. Below 0C, expect dramatically slower charging.

2. 2

   Drive longer before fast charging in cold weather

   Without preconditioning, highway driving for 30-45 minutes before a DC stop is the best way to warm the Dolphin's LFP battery. A short city drive is not enough.

3. 3

   Check the charger's power rating

   Verify the charger is rated at 100kW or higher to access the Dolphin's full 88kW capability. A 50kW charger is the max you will get regardless of conditions.

4. 4

   Charge at a lower SOC

   Arrive between 10-20% for the fastest charging speed. Avoid stopping when you are already at 60-70%, as the taper means much slower speeds.

5. 5

   Pick a stall without power sharing

   Choose a charger where no adjacent car is charging. Power sharing can cut your speed in half.

6. 6

   For AC, ensure 3-phase connection

   Use a 3-phase Type 2 cable on an 11kW charger to reach the Dolphin's full AC speed. Single-phase limits you to about 3.6kW.

Old Enel X account not working after rebrand to Enel X Way

Enel rebranded its charging network from Enel X to Enel X Way. If you had an Enel X account, it may not work in the new Enel X Way app without migration.

Symptoms

• Login credentials from the old Enel X app are rejected in Enel X Way
• The old Enel X app still works but shows outdated station information
• You have the Enel X Way app but your payment methods and history did not transfer
• Password reset emails reference 'Enel X' instead of 'Enel X Way'

How to Fix It

1. 1

   Download the Enel X Way app (not the old Enel X app)

   The old Enel X app is being phased out. Search for 'Enel X Way' specifically in the App Store or Google Play. The icon and name are different from the legacy app.

2. 2

   Try logging in with your existing Enel X credentials

   Some accounts were automatically migrated. Try your old email and password in the Enel X Way app first. If it works, your history and payment methods should transfer.

3. 3

   Reset your password if login fails

   Use the 'Forgot password' option in the Enel X Way app. The migration may have reset your credentials. Enter the same email you used for Enel X.

4. 4

   Create a new Enel X Way account if migration fails

   If your old account cannot be recovered, create a new account in the Enel X Way app. You will lose your charging history but can start fresh with a working account.

5. 5

   Contact support for billing continuity

   If you had a subscription or prepaid balance on Enel X, contact Enel X Way support to have it transferred. Do not assume it carried over automatically.

Contactless payment terminal hard to reach

At some Enel X Way stations, the contactless payment terminal is positioned awkwardly, too high, at a strange angle, or behind a panel that is not obvious. This makes tapping your card difficult.

Symptoms

• You cannot find the contactless reader on the charger
• The reader is positioned above head height or behind a flap
• Your card tap does not register because the angle is wrong
• The contactless symbol is visible but the reader does not seem to respond

How to Fix It

1. 1

   Look for the contactless symbol on all sides of the charger

   Enel X Way chargers place the payment terminal in different positions depending on the hardware model. Check the front, sides, and any panels or flaps on the charger cabinet.

2. 2

   Hold your card flat against the reader for 3 to 5 seconds

   The reader may be recessed or behind a thick panel. A quick tap might not register. Hold your card steady and flat against the symbol area.

3. 3

   Try your phone's digital wallet

   If the reader is hard to reach with a physical card, try Apple Pay or Google Pay on your phone. The NFC range on a phone can be slightly better at odd angles.

4. 4

   Use the Enel X Way app instead

   If the contactless terminal is genuinely inaccessible or not responding, start the session through the Enel X Way app. The app bypasses the physical reader entirely.

Charger placed in tight parking spots

Some Enel X Way stations are installed in existing parking structures or small lots where the charging spots are narrow. Maneuvering a larger EV into position and accessing the cable can be difficult.

Symptoms

• Charging spot is too narrow to open your car door fully
• Cable does not reach your vehicle's charging port because of the parking angle
• Other parked cars block access to the charger
• You have to reverse in at a specific angle to make the cable reach

How to Fix It

1. 1

   Check your vehicle's charging port location

   Before pulling in, note which side your charging port is on (front left, rear right, etc.) and position your car so the port faces the charger. This avoids stretching the cable across the car.

2. 2

   Try reversing in if the port is at the rear

   If your charging port is at the rear of the vehicle, reversing into the spot often gives you a shorter cable run and more room to connect.

3. 3

   Check adjacent spots before plugging in

   If two chargers are side by side and one has more room, use the more accessible one even if it means a slightly longer walk.

4. 4

   Leave your car door ajar while connecting

   Plug in the cable, then close your door and start the session from inside or via the app. You do not need to stand next to the charger for the entire session.

Power fluctuations or reduced charging speed

Some Enel X Way locations experience power fluctuations, especially during peak grid demand. Your charging speed may drop unexpectedly or fluctuate throughout the session.

Symptoms

• Charging speed starts high but drops significantly after a few minutes
• Speed fluctuates between 50 and 200 kW without stabilizing
• The charger delivers well below its advertised maximum
• Speed is lower in the evening than during daytime at the same station

How to Fix It

1. 1

   Check your battery level and temperature

   Most speed drops are caused by your vehicle, not the charger. Above 60 to 80% state of charge, your vehicle reduces its charging speed to protect the battery. Cold batteries also charge more slowly.

2. 2

   Check if other chargers at the station are in use

   Some Enel X Way stations share a power connection. If multiple chargers are active, the available power is split. Try charging when fewer vehicles are plugged in.

3. 3

   Try a different time of day

   Grid demand peaks in the early evening. If you notice slower speeds at certain hours, try charging during off-peak times (late evening or early morning) when the grid is less loaded.

4. 4

   Try a different charger unit

   An individual charger may have a hardware limitation. Another unit at the same station might deliver higher power.

5. 5

   Report persistent low speeds

   If a station consistently delivers far below its rated power, report it in the Enel X Way app. This helps their maintenance team investigate whether it is a hardware or grid supply issue.

App shows incorrect real-time availability

The Enel X Way app sometimes displays charger availability that does not match reality. You arrive expecting a free charger and find it occupied, or the app shows a charger as faulted when it actually works.

Symptoms

• App shows 'Available' but the charger is occupied when you arrive
• App shows 'Out of order' but the charger works fine
• Availability status does not change even after refreshing
• You planned your route based on app availability and found no working chargers

How to Fix It

1. 1

   Refresh the station page and check timestamps

   Pull down to refresh the station detail view. If the status was last updated more than 10 minutes ago, it may be stale.

2. 2

   Try plugging in regardless of the app status

   If the charger looks physically operational (lights on, screen active, no maintenance stickers), try plugging in and starting a session. The app status may simply be lagging.

3. 3

   Cross-check with another app

   Open Chargemap, Google Maps, or another charging app that shows Enel X Way stations. A different data source might have more current availability information.

4. 4

   Always have a backup station identified

   Do not rely on a single station, especially for long trips. Identify 1 or 2 alternative stations nearby before setting out, in case availability data is wrong.