BYD Dolphin Charging at Atlante

BYD Dolphin Charger Won't Start? Quick Fix Guide

Your BYD Dolphin is plugged in but charging is not starting. The charger might show an error, the car might not respond, or you are stuck on the authentication screen. Most failed charging starts have a simple explanation. Here is how to work through it step by step.

Symptoms

• Charger display shows error after plugging in the CCS2 connector
• Dolphin charge port light stays off or shows a warning color
• Car dashboard indicates no charging activity
• Charger screen stays on authentication or welcome screen
• Type 2 cable locks but no power flows

What to Do

1. 1

   Read the charger display

   Check for error messages, prompts, or status indicators. If it asks for authentication, that is your next step. If it shows a fault, the charger is the problem.

2. 2

   Unplug and replug the connector

   Remove the CCS2 or Type 2 connector completely, wait 10-15 seconds, and push it back in firmly. Listen for the locking click.

3. 3

   Authenticate with the charger

   Tap your RFID card, start the session in the app, or use contactless payment. Try authenticating both before and after plugging in.

4. 4

   Clean the charge port

   Inspect the Dolphin's charge port for debris, ice, or moisture. Wipe it clean with a dry cloth. In winter, gently remove any ice buildup.

5. 5

   Check for charging schedules

   In the Dolphin's settings, look for any scheduled or delayed charging options. Disable them to allow immediate charging.

6. 6

   Try a different stall or station

   If the charger is at fault, move to another stall or find an alternative station using your charging app.

BYD Dolphin Charging Payment Failed? Fix It Here

Your BYD Dolphin is plugged in and ready, but the payment is not going through. Whether it is an RFID card, an app, or contactless, payment problems are one of the most common reasons a charging session fails. Here is how to get it working.

Symptoms

• RFID card does not register when tapped on the charger
• Network app shows payment error or declined transaction
• Contactless bank card rejected at the terminal
• Charger asks for authentication but does not accept anything
• Session starts then immediately stops due to payment failure

What to Do

1. 1

   Check accepted payment methods

   Look at the charger for payment logos and instructions. Determine whether it accepts RFID, app payments, contactless cards, or specific network cards only.

2. 2

   Try the network's app

   Scan the QR code or find the app in your phone's app store. Create an account, add payment, and start the session through the app.

3. 3

   Switch payment methods

   Try a different card, a roaming provider (Plugsurfing, Shell Recharge, Chargemap), or a different app. Having multiple options increases your success rate.

4. 4

   Check your bank for declines

   Open your banking app to see if a pre-authorization was blocked. Approve it or try a different card with a higher available balance.

5. 5

   Try another stall

   The card reader on one stall may be faulty. Move to the next stall and try again.

6. 6

   Find a nearby alternative

   If nothing works, search for a different station where your payment methods are confirmed to work.

BYD Dolphin Charging Slowly? LFP Cold Weather Tips

Your BYD Dolphin is not charging as fast as you expected. With a maximum DC speed of 88kW and an LFP battery, the Dolphin has some specific quirks. LFP chemistry is safe to charge to 100% daily, but it is more sensitive to cold temperatures than NMC. Without preconditioning, winter performance takes a real hit. Here is what affects your speed.

Symptoms

• DC charging well below 88kW even on a capable charger
• Extremely slow charging in cold weather, sometimes under 20kW
• AC charging stuck below 11kW
• Charging slows significantly above 60% SOC
• First charge of the day in winter is much slower than subsequent ones

What to Do

1. 1

   Check the outside temperature

   If it is below 10C, cold is very likely the primary issue. LFP batteries lose charging speed faster than NMC in cold. Below 0C, expect dramatically slower charging.

2. 2

   Drive longer before fast charging in cold weather

   Without preconditioning, highway driving for 30-45 minutes before a DC stop is the best way to warm the Dolphin's LFP battery. A short city drive is not enough.

3. 3

   Check the charger's power rating

   Verify the charger is rated at 100kW or higher to access the Dolphin's full 88kW capability. A 50kW charger is the max you will get regardless of conditions.

4. 4

   Charge at a lower SOC

   Arrive between 10-20% for the fastest charging speed. Avoid stopping when you are already at 60-70%, as the taper means much slower speeds.

5. 5

   Pick a stall without power sharing

   Choose a charger where no adjacent car is charging. Power sharing can cut your speed in half.

6. 6

   For AC, ensure 3-phase connection

   Use a 3-phase Type 2 cable on an 11kW charger to reach the Dolphin's full AC speed. Single-phase limits you to about 3.6kW.

New station with teething problems

Atlante is expanding rapidly, and many stations are brand new. Newly installed chargers sometimes have firmware bugs, incomplete network configuration, or hardware that has not been fully tested under real-world conditions.

Symptoms

• Charger turns on but fails to communicate with your vehicle
• Session starts but drops after a few seconds
• Charger screen shows an error code you have never seen before
• Station appears on the map but the chargers are not yet operational

How to Fix It

1. 1

   Try a different charger at the same station

   New stations often have multiple units and the issue may be limited to one charger. Try another unit before giving up on the location.

2. 2

   Unplug, wait 30 seconds, and retry

   New charger firmware sometimes fails on the first handshake but succeeds on the second attempt. A short wait lets the charger reset its session state.

3. 3

   Start the session through the Atlante app

   If the charger's screen or contactless reader is not working properly, the app provides a separate communication path to the charger's backend. This can bypass local hardware issues.

4. 4

   Check the Atlante app for station status notes

   Atlante sometimes posts notices about newly activated stations that are still in testing. The station detail page in the app may show a note about limited functionality.

5. 5

   Report the issue and move to the next station

   Use the Atlante app to report the problem. New station issues are usually fixed quickly once reported. Check the app for the nearest alternative Atlante or competitor station.

App crashes on older phones

The Atlante app can be unstable on older phones or phones running outdated operating systems. The app may crash during login, while loading the map, or in the middle of starting a session.

Symptoms

• App closes unexpectedly when you open the station map
• App freezes during the payment screen
• Login screen loads but the app crashes after entering credentials
• App works briefly but crashes when you try to start a session

How to Fix It

1. 1

   Update the Atlante app to the latest version

   Atlante pushes frequent updates that fix stability issues. Open the App Store or Google Play and check for updates before your trip.

2. 2

   Clear the app cache

   On Android, go to Settings, Apps, Atlante, and clear the cache. On iPhone, delete and reinstall the app. Corrupted cache data is a common cause of crashes.

3. 3

   Check your phone's operating system version

   The Atlante app may require iOS 15+ or Android 10+. If your phone is on an older version, update if possible. If your phone cannot update, you may need a roaming app as a backup.

4. 4

   Use contactless payment as a fallback

   If the app keeps crashing and the station supports contactless, tap your credit or debit card on the charger's payment terminal. Not all Atlante stations have this yet, but it completely bypasses the app.

5. 5

   Try a roaming app

   Apps like Chargemap, Shell Recharge, or Electropass can start sessions at Atlante stations without using the Atlante app. Check roaming coverage before relying on this.

Contactless payment terminal not activated

Atlante is rolling out contactless card payment across its network, but not every charger has an active terminal yet. Some units have the hardware installed but the payment function is not turned on.

Symptoms

• Card reader is visible on the charger but does not respond to a tap
• Screen says 'Use app to start' with no contactless option shown
• Contactless symbol is printed on the charger but the reader light is off
• You see a payment terminal but tapping produces no response

How to Fix It

1. 1

   Download and use the Atlante app

   At stations where contactless is not yet active, the Atlante app is the primary payment method. Download it before your trip and add a payment card in advance.

2. 2

   Check the charger screen for payment instructions

   Some Atlante chargers display which payment methods are currently available. If contactless is not listed, the terminal is not active at that unit.

3. 3

   Try a different charger at the same station

   Contactless activation sometimes rolls out unit by unit. Another charger at the same station may have an active terminal.

4. 4

   Use a roaming RFID card or app

   If you have an RFID card from a roaming provider, try tapping it. Some Atlante stations accept roaming RFID even when the contactless card terminal is not active.

Charger screen hard to read in direct sunlight

Some Atlante charger screens have low brightness levels that make them nearly impossible to read in bright sunlight. This is especially common at stations in Southern Europe during summer.

Symptoms

• Screen content is barely visible outdoors during the day
• You cannot read the price, status, or error messages on the screen
• Screen appears to be off but the charger is actually on
• You have to cup your hands around the screen to read it

How to Fix It

1. 1

   Use your body or hand to shade the screen

   Stand to block direct sunlight from hitting the screen. Even partial shade can make the display readable.

2. 2

   Take a photo of the screen with your phone

   Your phone camera can sometimes capture what your eyes cannot. Take a photo and zoom in to read the text.

3. 3

   Use the Atlante app to monitor your session

   All session information (charging speed, energy delivered, cost, estimated time) is available in the app. You do not need the charger screen to track your session.

4. 4

   Start the session entirely through the app

   If you cannot read the screen at all, use the Atlante app to select the charger, start the session, and stop it when done. This avoids needing to interact with the screen.

Cable connector requires specific angle to lock

Some Atlante charger cables need to be inserted at a particular angle or with extra force for the CCS2 connector to seat properly. If it is not fully locked, the session will not start.

Symptoms

• Connector feels like it is in but the charger does not recognize it
• Charger screen says 'Connect cable' even though the cable is plugged in
• You hear a partial click but the connector is not locked
• Connector slides back out after you let go

How to Fix It

1. 1

   Push the connector straight in, then slightly upward

   Some Atlante CCS2 connectors need a slight upward tilt after the initial push to engage the locking mechanism. You should feel and hear a solid click.

2. 2

   Check for debris in the vehicle's charging port

   Dust, ice, or a small pebble in the port can prevent the connector from seating fully. Inspect the port and brush out anything you find.

3. 3

   Make sure the vehicle is unlocked and ready to charge

   Some vehicles lock the charging port flap or disable the inlet when the car is locked or in drive mode. Ensure the car is in park and unlocked.

4. 4

   Try a different cable if the charger has two

   If the charger has two CCS2 cables, try the other one. One cable may have a slightly worn connector that does not seat as easily.