BMW i7 Charging at Enel X Way

BMW i7 Charger Won't Start: Step-by-Step Fix Guide

You have connected your BMW i7 to a public charger, but the session refuses to start. No charging indicator, no power, just frustration. This is a common issue that usually comes down to authentication, cable seating, or charger status. Here is what to check.

Symptoms

• Charger display shows 'waiting for vehicle' despite the cable being connected
• iDrive does not indicate any charging activity
• The i7's charge port LED stays off or flashes red
• The CCS2 connector does not lock into the port
• An error message appears on the charger screen after plugging in

What to Do

1. 1

   Unlock the car and open the charge port

   Ensure the i7 is unlocked. Press the charge port flap on the rear right side to open it. Some i7 models also let you open it through the My BMW app.

2. 2

   Insert the connector until it clicks

   Push the CCS2 or Type 2 connector straight into the port firmly. You should hear a click when it locks. The i7's port LED should illuminate once the connection is established.

3. 3

   Authenticate at the charger

   Tap your RFID card on the reader, start the session in your charging app, or use contactless payment at the terminal. Wait for the charger to confirm before expecting power flow.

4. 4

   Disable scheduled charging

   In iDrive, navigate to Charging Settings. If departure time or a schedule is set, switch to Charge Immediately. This ensures the i7 starts as soon as the charger is ready.

5. 5

   Disconnect and retry

   Remove the cable, wait 15 seconds, and reconnect. This resets the communication protocol between the i7 and the charger.

6. 6

   Try another charger

   If nothing resolves the issue, the charger is likely faulty. Move to a different stall or station and report the broken unit through the network's app.

BMW i7 Charging Payment Failed: How to Resolve Fast

Your BMW i7 is plugged in at a public charger, but the payment will not go through. RFID card not recognized, app error, or bank card declined. This is not a car issue, but it blocks your charging session all the same. Here is how to work through it.

Symptoms

• The charger shows 'authentication failed' after tapping your RFID card
• Your charging app displays a payment error when starting a session
• Contactless bank card is declined at the charger terminal
• The charger prompts for payment but none of your methods work
• A session starts then immediately cancels due to a billing issue

What to Do

1. 1

   Try an alternative payment method

   Switch from RFID to the charging app, or from the app to contactless bank card. Most chargers accept at least two payment methods.

2. 2

   Check your account and card details

   Open your charging app and verify the linked payment method is current. For prepaid accounts, ensure your balance covers the session.

3. 3

   Verify the charger accepts your provider

   Look at the charger for logos of accepted networks. If yours is not listed, you need ad-hoc payment or a different card.

4. 4

   Use the QR code for ad-hoc payment

   Scan the QR code on the charger with your phone camera. This opens a browser-based payment page where you can pay with any credit or debit card, no app required.

5. 5

   Restart the authorization

   Cancel any pending session in the app and start fresh. Sometimes the first authorization attempt fails but a second one succeeds.

6. 6

   Contact the network's support line

   Most chargers display a phone number for the operator. They can sometimes authorize a session on their end or identify the specific payment issue.

BMW i7 xDrive60 Charging Slow: Causes and Solutions

Your BMW i7 xDrive60 has a large 101.7kWh battery and supports up to 195kW DC fast charging. But if the numbers on iDrive are disappointing, you are not alone. Several factors can limit the i7's charging speed, and knowing what to look for helps you get the most out of every stop.

Symptoms

• DC fast charging power shown in iDrive is well below 195kW
• The large 101.7kWh battery takes much longer than expected to charge
• Charging curve drops off steeply after 40-50%
• AC charging speed is limited to 11kW despite using a faster station
• A temperature or battery conditioning message appears in iDrive

What to Do

1. 1

   View charging details in iDrive

   The iDrive display shows current kW, battery temperature, and time remaining. Check whether the car or the charger is the bottleneck by comparing the current kW to the charger's rated output.

2. 2

   Precondition before every fast charge

   Enter the charging station as a destination in iDrive. The i7's thermal management will bring the battery to the ideal temperature range while driving. This is the single biggest factor in cold weather charging speed.

3. 3

   Find chargers rated 200kW or above

   Use the My BMW app or a charger map to locate high-power stations. Ionity and Fastned locations typically offer 300kW+ chargers that let the i7 reach its peak.

4. 4

   Choose an unoccupied charger pair

   If the station has paired stalls, pick one where the adjacent stall is empty. This avoids power sharing and gives your i7 full access to the charger's output.

5. 5

   Charge between 10% and 80%

   Plan stops to arrive between 10% and 15% and leave around 80%. The i7's large battery means even 80% gives you substantial range, and you avoid the slow tail end of the charging curve.

6. 6

   Check for OTA software updates

   BMW releases over-the-air updates that can improve charging behavior. Go to Settings, then Software Update in iDrive to check for and install any available updates.

Old Enel X account not working after rebrand to Enel X Way

Enel rebranded its charging network from Enel X to Enel X Way. If you had an Enel X account, it may not work in the new Enel X Way app without migration.

Symptoms

• Login credentials from the old Enel X app are rejected in Enel X Way
• The old Enel X app still works but shows outdated station information
• You have the Enel X Way app but your payment methods and history did not transfer
• Password reset emails reference 'Enel X' instead of 'Enel X Way'

How to Fix It

1. 1

   Download the Enel X Way app (not the old Enel X app)

   The old Enel X app is being phased out. Search for 'Enel X Way' specifically in the App Store or Google Play. The icon and name are different from the legacy app.

2. 2

   Try logging in with your existing Enel X credentials

   Some accounts were automatically migrated. Try your old email and password in the Enel X Way app first. If it works, your history and payment methods should transfer.

3. 3

   Reset your password if login fails

   Use the 'Forgot password' option in the Enel X Way app. The migration may have reset your credentials. Enter the same email you used for Enel X.

4. 4

   Create a new Enel X Way account if migration fails

   If your old account cannot be recovered, create a new account in the Enel X Way app. You will lose your charging history but can start fresh with a working account.

5. 5

   Contact support for billing continuity

   If you had a subscription or prepaid balance on Enel X, contact Enel X Way support to have it transferred. Do not assume it carried over automatically.

Contactless payment terminal hard to reach

At some Enel X Way stations, the contactless payment terminal is positioned awkwardly, too high, at a strange angle, or behind a panel that is not obvious. This makes tapping your card difficult.

Symptoms

• You cannot find the contactless reader on the charger
• The reader is positioned above head height or behind a flap
• Your card tap does not register because the angle is wrong
• The contactless symbol is visible but the reader does not seem to respond

How to Fix It

1. 1

   Look for the contactless symbol on all sides of the charger

   Enel X Way chargers place the payment terminal in different positions depending on the hardware model. Check the front, sides, and any panels or flaps on the charger cabinet.

2. 2

   Hold your card flat against the reader for 3 to 5 seconds

   The reader may be recessed or behind a thick panel. A quick tap might not register. Hold your card steady and flat against the symbol area.

3. 3

   Try your phone's digital wallet

   If the reader is hard to reach with a physical card, try Apple Pay or Google Pay on your phone. The NFC range on a phone can be slightly better at odd angles.

4. 4

   Use the Enel X Way app instead

   If the contactless terminal is genuinely inaccessible or not responding, start the session through the Enel X Way app. The app bypasses the physical reader entirely.

Charger placed in tight parking spots

Some Enel X Way stations are installed in existing parking structures or small lots where the charging spots are narrow. Maneuvering a larger EV into position and accessing the cable can be difficult.

Symptoms

• Charging spot is too narrow to open your car door fully
• Cable does not reach your vehicle's charging port because of the parking angle
• Other parked cars block access to the charger
• You have to reverse in at a specific angle to make the cable reach

How to Fix It

1. 1

   Check your vehicle's charging port location

   Before pulling in, note which side your charging port is on (front left, rear right, etc.) and position your car so the port faces the charger. This avoids stretching the cable across the car.

2. 2

   Try reversing in if the port is at the rear

   If your charging port is at the rear of the vehicle, reversing into the spot often gives you a shorter cable run and more room to connect.

3. 3

   Check adjacent spots before plugging in

   If two chargers are side by side and one has more room, use the more accessible one even if it means a slightly longer walk.

4. 4

   Leave your car door ajar while connecting

   Plug in the cable, then close your door and start the session from inside or via the app. You do not need to stand next to the charger for the entire session.

Power fluctuations or reduced charging speed

Some Enel X Way locations experience power fluctuations, especially during peak grid demand. Your charging speed may drop unexpectedly or fluctuate throughout the session.

Symptoms

• Charging speed starts high but drops significantly after a few minutes
• Speed fluctuates between 50 and 200 kW without stabilizing
• The charger delivers well below its advertised maximum
• Speed is lower in the evening than during daytime at the same station

How to Fix It

1. 1

   Check your battery level and temperature

   Most speed drops are caused by your vehicle, not the charger. Above 60 to 80% state of charge, your vehicle reduces its charging speed to protect the battery. Cold batteries also charge more slowly.

2. 2

   Check if other chargers at the station are in use

   Some Enel X Way stations share a power connection. If multiple chargers are active, the available power is split. Try charging when fewer vehicles are plugged in.

3. 3

   Try a different time of day

   Grid demand peaks in the early evening. If you notice slower speeds at certain hours, try charging during off-peak times (late evening or early morning) when the grid is less loaded.

4. 4

   Try a different charger unit

   An individual charger may have a hardware limitation. Another unit at the same station might deliver higher power.

5. 5

   Report persistent low speeds

   If a station consistently delivers far below its rated power, report it in the Enel X Way app. This helps their maintenance team investigate whether it is a hardware or grid supply issue.

App shows incorrect real-time availability

The Enel X Way app sometimes displays charger availability that does not match reality. You arrive expecting a free charger and find it occupied, or the app shows a charger as faulted when it actually works.

Symptoms

• App shows 'Available' but the charger is occupied when you arrive
• App shows 'Out of order' but the charger works fine
• Availability status does not change even after refreshing
• You planned your route based on app availability and found no working chargers

How to Fix It

1. 1

   Refresh the station page and check timestamps

   Pull down to refresh the station detail view. If the status was last updated more than 10 minutes ago, it may be stale.

2. 2

   Try plugging in regardless of the app status

   If the charger looks physically operational (lights on, screen active, no maintenance stickers), try plugging in and starting a session. The app status may simply be lagging.

3. 3

   Cross-check with another app

   Open Chargemap, Google Maps, or another charging app that shows Enel X Way stations. A different data source might have more current availability information.

4. 4

   Always have a backup station identified

   Do not rely on a single station, especially for long trips. Identify 1 or 2 alternative stations nearby before setting out, in case availability data is wrong.