Audi e-tron GT Charging at Le Plein

Audi e-tron GT Charger Won't Start Charging

You have plugged in your e-tron GT, but nothing happens. The MMI screen stays silent or shows an error. The e-tron GT has two charge ports, one on the left rear for AC and one on the right rear for DC, which can add confusion. This is frustrating, but it is almost always fixable on the spot.

Symptoms

• CCS2 or Type 2 connector plugged in but no charging indicator on the MMI touchscreen
• Charger screen shows 'Waiting for vehicle' or stays on the start screen
• e-tron GT charge port LED blinks but charging never begins
• Authentication succeeds on the charger but the session fails to start
• Plugged into the wrong charge port for the type of charging

What to Do

1. 1

   Verify you are using the correct charge port

   For DC fast charging, use the charge port on the right rear of the car. For AC charging with a Type 2 cable, use the charge port on the left rear. Using the wrong port is the most common cause of a failed start on the e-tron GT.

2. 2

   Check for a charging schedule or departure timer

   On the MMI touchscreen, go to the e-tron charging settings. If a timer or departure schedule is active, switch it to charge immediately or turn off the timer. You can also check the myAudi app for active schedules.

3. 3

   Unplug and reconnect firmly

   Remove the connector, wait 10 seconds, then reinsert it firmly into the correct charge port until you hear a clear click. Watch the charge port LED for a steady response.

4. 4

   Restart the charger session

   On the charger, end the current session if one is active. Then start a new session by tapping your RFID card, using contactless payment, or restarting in the charger operator's app.

5. 5

   Reboot the MMI system

   Press and hold the power button on the MMI touchscreen for about 10 seconds until the screen goes dark and restarts. Once it is back, try plugging in again. This resets the charging communication on the car's side.

6. 6

   Try a different charger

   If the station has multiple stalls, move to a different one. Some chargers have firmware issues that cause 800V handshake failures. A different unit at the same station may work fine.

Audi e-tron GT Charging Payment Failed at Station

You are at the charger, your e-tron GT is plugged in, but the payment will not go through. The charger shows an error or just sits there waiting. Payment failures at public chargers are common and usually have nothing to do with your car. Here is how to get charging.

Symptoms

• Charger displays 'Payment failed' or 'Authorization error' after tapping your card
• RFID card is not recognized by the charger's reader
• myAudi or Audi charging app shows an error when trying to start a remote session
• Plug & Charge does not activate after plugging in the CCS2 connector on the right rear
• Contactless payment terminal on the charger rejects your bank card

What to Do

1. 1

   Try a different payment method

   If your RFID card failed, try contactless with your bank card or phone. If contactless failed, try the charger operator's app. Having two or three payment options gives you the best chance of getting going.

2. 2

   Check the myAudi app

   Open the myAudi app on your phone. Make sure your Audi charging account is active, your payment method is valid, and Plug & Charge is enabled if you want to use it. Try starting the session remotely through the app.

3. 3

   Scan the charger's QR code

   Most public chargers have a QR code on the unit. Scanning it with your phone's camera opens the operator's payment page. You can usually pay with a credit card through the browser without downloading an app.

4. 4

   Check your bank app for blocked transactions

   Open your banking app and check for any flagged or blocked transactions. Some banks require you to approve the charge manually. If you see a notification, approve it and try the payment again.

5. 5

   Try Plug & Charge if available

   If the charger supports Plug & Charge and your e-tron GT has it activated through the myAudi app, simply unplug and replug the CCS2 connector into the right rear charge port. The payment should authorize automatically through the cable.

6. 6

   Move to a different charger

   If nothing works at this station, the charger's payment system may be down entirely. Find a nearby alternative using the myAudi app or the e-tron GT's built-in charger finder on the MMI touchscreen.

Audi e-tron GT Charging Slower Than Expected

You plugged in your e-tron GT expecting 270 kW and the MMI touchscreen shows 50 kW. With an 800V architecture designed for ultra-fast charging, this is especially frustrating. Slow charging on the e-tron GT is almost never a defect. It is usually the charger's capability, the battery temperature, or a mismatch between the station's voltage and the car's 800V system.

Symptoms

• DC fast charging speed well below the 270 kW maximum shown on the MMI touchscreen
• AC home charging stuck at 3-4 kW instead of the full 11 kW or optional 22 kW
• Charging speed drops significantly after reaching 50-60% state of charge
• The e-tron GT charges at similar speeds to 400V vehicles despite having 800V architecture
• MMI display shows lower power than the charger's rated output

What to Do

1. 1

   Verify the charger supports 800V and high power

   Check the charger's label or the operator's app for the maximum power output and voltage. For the e-tron GT to reach its peak 270 kW, you need a charger rated for at least 270 kW at 800V. A 150 kW or 400V charger will work but at much lower speeds.

2. 2

   Check the battery temperature

   Look at the charging screen on the MMI touchscreen. If the battery is cold, use the navigation system to route to the fast charger. The e-tron GT will precondition the battery on the way using its heat pump. If you are already at the charger, driving for 15-20 minutes and returning can help.

3. 3

   Check your state of charge

   Look at the digital instrument cluster or MMI screen. If you are above 80%, the slower speed is expected. For the fastest charging, arrive at the charger between 5-20% and charge to 80%.

4. 4

   Verify the charger is not sharing power

   Look at the charger unit. If there are two cables and someone is using the other one, you may be sharing power. Move to an unoccupied charger if one is available.

5. 5

   Check the AC charge current setting

   On the MMI touchscreen, go to the e-tron charging settings. Make sure the AC charge current is set to maximum. If you have the optional 22 kW onboard charger, verify your wallbox supports it.

6. 6

   Try a different charger

   If the speed is still low, the charger itself may be degraded or faulty. Look for Ionity, Electrify America, or other 350 kW networks that support 800V to get the best speeds from your e-tron GT.

App and charger interface only in French

The Le Plein app and the charger screen interface are primarily in French. If you do not read French, navigating menus and understanding error messages takes extra effort.

Symptoms

• The app menus, buttons, and instructions are entirely in French
• The charger screen shows an error message you cannot read
• You cannot find the 'start session' button because the labels are in French
• Support articles and FAQ in the app are in French only

How to Fix It

1. 1

   Learn the key French charging terms

   A few words go a long way. 'Démarrer' means start, 'Arrêter' means stop, 'Brancher' means plug in, 'En charge' means charging, 'Disponible' means available, 'Hors service' means out of order. With these, you can navigate most screens.

2. 2

   Use your phone's translation feature on the charger screen

   Most smartphones can translate text from a photo. Point your camera at the charger screen and use Google Translate, Apple Translate, or a similar app to read the message. This works well for error messages you do not recognize.

3. 3

   Set up the session flow before you arrive

   Open the Le Plein app at home and familiarize yourself with the session flow: find station, select charger, start session. Once you know where the buttons are, the French labels matter less.

4. 4

   Use your phone's built-in app translation if available

   On Android, you can translate app interfaces using the system translation feature. On iOS, you can take a screenshot and translate it. This helps with menus and settings you need to navigate once.

RFID card ordering process through the app

Le Plein RFID cards can only be ordered through the app. There is no option to buy one at a station or from a retail location. The ordering and activation process has a few steps that can trip people up.

Symptoms

• You want an RFID card but cannot find where to order it
• You ordered a card but it has not arrived after the expected delivery time
• Your RFID card arrived but does not work at the charger
• The app says your card is active but the charger does not recognize it

How to Fix It

1. 1

   Order the card through the Le Plein app account section

   Open the Le Plein app, go to your account or profile settings, and look for an RFID card or badge option. Follow the ordering flow, which will ask for your delivery address. Delivery takes several business days within France.

2. 2

   Activate the card in the app after it arrives

   When the card arrives, you may need to activate it in the Le Plein app by entering the card number or scanning it. Check the instructions that came with the card. An unactivated card will not start a session.

3. 3

   Make sure your payment method is valid

   The RFID card charges sessions to the payment method saved in your Le Plein account. If your saved card has expired or been declined, the RFID card will not work even though it is activated. Update your payment details in the app.

4. 4

   Use the app to start sessions while waiting for the RFID card

   You do not need the physical RFID card to charge. The Le Plein app can start sessions directly. Use the app until your card arrives and is activated.

Station coverage concentrated in certain French regions

Le Plein's network does not cover all of France equally. Some regions have good coverage while others have very few or no stations. This can be a problem on longer trips.

Symptoms

• The app shows no Le Plein stations along a section of your route
• Stations are clustered around certain cities but absent in rural areas between them
• You planned a trip assuming Le Plein coverage and found a gap
• The nearest Le Plein station is far from your destination

How to Fix It

1. 1

   Check Le Plein coverage along your entire route before departing

   Open the Le Plein app and trace your route on the map. Look for gaps where there are no stations for long stretches. Identify these gaps before you leave, not when your battery is low.

2. 2

   Install backup charging apps for other French networks

   France has several other charging networks, including Ionity, TotalEnergies, Fastned, and local operators. Having apps for two or three networks ensures you always have a fallback when Le Plein coverage runs out.

3. 3

   Use a roaming RFID card for multi-network access

   A roaming card from Chargemap or another aggregator can access chargers from multiple French networks. This is especially useful in areas where Le Plein has no presence.

4. 4

   Plan with a multi-network route planner

   A Better Routeplanner (ABRP) or Chargemap show stations from all networks. Enter your vehicle and destination to get charging stops that work regardless of the operator.

Charger screen errors you cannot decipher

When something goes wrong at a Le Plein charger, the error message on the screen is in French. If you do not understand the message, you cannot tell whether to retry or move on.

Symptoms

• The screen shows an error code or message in French after you plug in
• The charger stopped mid-session and the screen displays a French message
• You see 'Hors service' or 'Erreur' but do not know the specific problem
• The screen shows instructions you cannot follow

How to Fix It

1. 1

   Photo-translate the error message

   Take a photo of the screen and use Google Translate's camera feature or Apple Translate to read it. This gives you the specific error, not just a guess.

2. 2

   Know the most common French charger errors

   'Hors service' means out of order, do not wait. 'Erreur de communication' means a communication error between charger and vehicle, try replugging. 'Session en cours' means a session is already active, possibly from a previous user who did not end it. 'Veuillez patienter' means please wait.

3. 3

   Try unplugging and reconnecting

   Many charger errors clear themselves when you unplug, wait 30 seconds, and plug in again. This resets the communication between your vehicle and the charger.

4. 4

   End any stuck session in the Le Plein app

   If the charger thinks a session is still active from a previous user, you may not be able to start a new one. Check the app to see if there is an active session on that charger. Sometimes you need to wait for it to time out.

5. 5

   Move to another charger if the error persists

   If the same error appears after two or three attempts, the charger likely has a hardware or software issue. Try another charger at the same station, or drive to the next Le Plein or alternative station.

Support phone line in French only

Le Plein's support phone line is staffed by French-speaking agents. If you need help at a station and do not speak French, communication can be difficult.

Symptoms

• You called support and the agent speaks only French
• The automated phone menu is in French with no language option
• You cannot explain your problem over the phone
• You need urgent help at a station but cannot communicate effectively

How to Fix It

1. 1

   Try the app's support or help section first

   Written support through the app (email, contact form, or chat) gives you time to use a translation tool. Type your question in English, translate it to French, and paste it. This is often more effective than a phone call.

2. 2

   Prepare a few key phrases in advance

   If you may need to call, have these ready: 'La borne ne fonctionne pas' (the charger is not working), 'Le câble est bloqué' (the cable is stuck), 'J'ai besoin d'aide' (I need help), and the station number or location name.

3. 3

   Use a real-time translation app during the call

   Google Translate's conversation mode can translate speech in both directions. It is not perfect, but it helps bridge the gap. Open it before you call.

4. 4

   Ask a nearby person for help if available

   If you are at a station and someone nearby speaks both French and your language, asking for a quick translation assist is perfectly reasonable. Most people are happy to help.