Tesla Model S Charging at Le Plein

Tesla Model S Charger Will Not Start a Session

You plugged in your Model S and nothing is happening. No green light on the charge port, no animation on the 17-inch touchscreen, just silence. Whether you are at a Supercharger, a third-party CCS2 station, or a home wallbox, there are a handful of common reasons the session will not begin.

Symptoms

• Charge port LED stays white or flashes red after plugging in the connector
• 17-inch touchscreen shows no charging animation or displays an error message
• Supercharger stall makes a click but does not begin delivering power
• CCS2 connector at a third-party station locks in but charging never starts
• Tesla app shows 'Not Charging' even though the cable is connected

What to Do

1. 1

   Check the charge port LED color

   Walk to the left rear of the car and look at the charge port light. White means ready but not connected. Blue means communicating. Green means charging. Red or amber means there is a fault. If it is white with the cable plugged in, remove and reseat the connector firmly.

2. 2

   Unplug and replug the connector

   Remove the connector completely, wait five seconds, then reinsert it until you hear the latch click. On CCS2 connectors, make sure both the top (AC pins) and bottom (DC pins) sections are seated properly.

3. 3

   Check for scheduled charging on the touchscreen

   On the 17-inch touchscreen, go to Controls, then Charging. If scheduled charging is active, you will see the planned start time. Tap to disable it or select 'Charge Now' to override the schedule.

4. 4

   Authorize the session at non-Tesla chargers

   At third-party CCS2 stations, check whether the charger requires you to start the session through an app, RFID card, or contactless payment. Plug & Charge works at supported stations, but many still require manual authorization.

5. 5

   Try a different stall or charger

   If you are at a Supercharger, move to a different stall. If you are at a third-party station, try the other connector. A faulted charger looks identical to a working one from the outside.

6. 6

   Restart the touchscreen

   Hold both scroll wheels on the steering wheel for about 10 seconds until the 17-inch touchscreen goes black and reboots. This resets the charging controller and fixes some communication glitches. The car stays on during the reboot.

Tesla Model S Payment Failed at Charging Station

You are plugged in and the charger is waiting for payment, or the Supercharger session will not start because of a billing issue. Payment problems are one of the most common reasons drivers get stuck at chargers, and the Model S has multiple ways to pay depending on where you are charging.

Symptoms

• Supercharger session will not start and the Tesla app shows a payment error
• Third-party CCS2 charger displays 'Authorization failed' after tapping your card
• RFID card is not recognized by the charger's reader
• Plug & Charge does not activate at a supported station
• Contactless bank card is rejected by the charger's payment terminal

What to Do

1. 1

   Check your Tesla account payment method

   Open the Tesla app on your phone. Go to Account, then Payment. Verify your credit card is current and has not expired. If the card was replaced, update the details. Supercharger sessions will not start without a valid payment method on file.

2. 2

   Try a different payment method at the charger

   If your RFID card failed, try contactless with your bank card or phone. If contactless failed, try the charger operator's app. Having at least two payment methods gives you a backup when one does not work.

3. 3

   Scan the charger QR code for browser payment

   Most public chargers have a QR code on the unit. Scanning it with your phone opens the operator's payment page in your browser. You can usually pay with a credit card directly without downloading their app.

4. 4

   Check your banking app for blocked transactions

   Open your banking app and look for flagged or declined transactions. Some banks require you to approve the charge manually. Approve it and retry the payment at the charger.

5. 5

   Try Plug & Charge by replugging

   If the charger supports Plug & Charge, unplug the CCS2 connector from your Model S, wait a few seconds, and replug. Payment should authorize automatically through the cable. This only works if your Tesla account has Plug & Charge enabled and the charger supports ISO 15118.

6. 6

   Move to a Supercharger or a different station

   If you cannot resolve the payment issue, find a Tesla Supercharger using the nav on the 17-inch touchscreen. Supercharger billing is handled entirely through your Tesla account, bypassing third-party payment systems.

Tesla Model S Charging Slower Than Expected at Charger

You pulled into a Supercharger expecting 250 kW and the 17-inch touchscreen shows 80 kW. Or your home wallbox is crawling at 3 kW instead of 11 kW. The Model S has one of the fastest charging curves on the road, but reaching peak speed depends on battery temperature, state of charge, and a few settings you can check in under a minute.

Symptoms

• DC fast charging power well below 250 kW on the touchscreen despite a rated charger
• AC home charging stuck at 3-4 kW instead of the expected 11 kW on 3-phase
• Charging speed drops sharply after 40-50% on the touchscreen during DC fast charging
• Supercharger shows significantly lower kW than neighboring stalls
• Non-Tesla CCS2 charger delivers far less power than its rated maximum

What to Do

1. 1

   Check if the battery was preconditioned

   On the 17-inch touchscreen, tap the charging icon. If you see a snowflake icon or a message about conditioning, the battery was not warm enough when you arrived. Next time, navigate to the charger using Tesla nav at least 20-30 minutes before arrival so preconditioning kicks in automatically.

2. 2

   Check your current state of charge

   If you are above 50%, the slower speed is expected on the 95 kWh NCA pack. Peak power happens roughly between 5-30%. For the fastest charging stops on a road trip, arrive between 10-20%.

3. 3

   Move to an unpaired Supercharger stall

   Look at the stall numbers. If they are labeled in A/B pairs (3A/3B, 4A/4B), pick a stall where the paired stall is empty. At V3 or V4 Superchargers with the Magic Dock or the new V4 cable, this is not a concern.

4. 4

   Check the AC charge current limit on the touchscreen

   Go to Controls, then Charging on the touchscreen. Look for the charge current setting. Make sure it is set to the maximum amperage. This only affects AC charging at home or destination chargers, not Supercharging.

5. 5

   Try a different charger or stall

   If speeds remain low, the charger hardware may be degraded. Try another stall at the same location. On non-Tesla CCS2 stations, check the charger display for error codes or reduced power notices.

6. 6

   Check for a Tesla software update

   Go to Controls, then Software on the touchscreen. If an update is pending, install it. Tesla has adjusted charging curves through over-the-air updates in the past, sometimes improving peak speeds.

App and charger interface only in French

The Le Plein app and the charger screen interface are primarily in French. If you do not read French, navigating menus and understanding error messages takes extra effort.

Symptoms

• The app menus, buttons, and instructions are entirely in French
• The charger screen shows an error message you cannot read
• You cannot find the 'start session' button because the labels are in French
• Support articles and FAQ in the app are in French only

How to Fix It

1. 1

   Learn the key French charging terms

   A few words go a long way. 'Démarrer' means start, 'Arrêter' means stop, 'Brancher' means plug in, 'En charge' means charging, 'Disponible' means available, 'Hors service' means out of order. With these, you can navigate most screens.

2. 2

   Use your phone's translation feature on the charger screen

   Most smartphones can translate text from a photo. Point your camera at the charger screen and use Google Translate, Apple Translate, or a similar app to read the message. This works well for error messages you do not recognize.

3. 3

   Set up the session flow before you arrive

   Open the Le Plein app at home and familiarize yourself with the session flow: find station, select charger, start session. Once you know where the buttons are, the French labels matter less.

4. 4

   Use your phone's built-in app translation if available

   On Android, you can translate app interfaces using the system translation feature. On iOS, you can take a screenshot and translate it. This helps with menus and settings you need to navigate once.

RFID card ordering process through the app

Le Plein RFID cards can only be ordered through the app. There is no option to buy one at a station or from a retail location. The ordering and activation process has a few steps that can trip people up.

Symptoms

• You want an RFID card but cannot find where to order it
• You ordered a card but it has not arrived after the expected delivery time
• Your RFID card arrived but does not work at the charger
• The app says your card is active but the charger does not recognize it

How to Fix It

1. 1

   Order the card through the Le Plein app account section

   Open the Le Plein app, go to your account or profile settings, and look for an RFID card or badge option. Follow the ordering flow, which will ask for your delivery address. Delivery takes several business days within France.

2. 2

   Activate the card in the app after it arrives

   When the card arrives, you may need to activate it in the Le Plein app by entering the card number or scanning it. Check the instructions that came with the card. An unactivated card will not start a session.

3. 3

   Make sure your payment method is valid

   The RFID card charges sessions to the payment method saved in your Le Plein account. If your saved card has expired or been declined, the RFID card will not work even though it is activated. Update your payment details in the app.

4. 4

   Use the app to start sessions while waiting for the RFID card

   You do not need the physical RFID card to charge. The Le Plein app can start sessions directly. Use the app until your card arrives and is activated.

Station coverage concentrated in certain French regions

Le Plein's network does not cover all of France equally. Some regions have good coverage while others have very few or no stations. This can be a problem on longer trips.

Symptoms

• The app shows no Le Plein stations along a section of your route
• Stations are clustered around certain cities but absent in rural areas between them
• You planned a trip assuming Le Plein coverage and found a gap
• The nearest Le Plein station is far from your destination

How to Fix It

1. 1

   Check Le Plein coverage along your entire route before departing

   Open the Le Plein app and trace your route on the map. Look for gaps where there are no stations for long stretches. Identify these gaps before you leave, not when your battery is low.

2. 2

   Install backup charging apps for other French networks

   France has several other charging networks, including Ionity, TotalEnergies, Fastned, and local operators. Having apps for two or three networks ensures you always have a fallback when Le Plein coverage runs out.

3. 3

   Use a roaming RFID card for multi-network access

   A roaming card from Chargemap or another aggregator can access chargers from multiple French networks. This is especially useful in areas where Le Plein has no presence.

4. 4

   Plan with a multi-network route planner

   A Better Routeplanner (ABRP) or Chargemap show stations from all networks. Enter your vehicle and destination to get charging stops that work regardless of the operator.

Charger screen errors you cannot decipher

When something goes wrong at a Le Plein charger, the error message on the screen is in French. If you do not understand the message, you cannot tell whether to retry or move on.

Symptoms

• The screen shows an error code or message in French after you plug in
• The charger stopped mid-session and the screen displays a French message
• You see 'Hors service' or 'Erreur' but do not know the specific problem
• The screen shows instructions you cannot follow

How to Fix It

1. 1

   Photo-translate the error message

   Take a photo of the screen and use Google Translate's camera feature or Apple Translate to read it. This gives you the specific error, not just a guess.

2. 2

   Know the most common French charger errors

   'Hors service' means out of order, do not wait. 'Erreur de communication' means a communication error between charger and vehicle, try replugging. 'Session en cours' means a session is already active, possibly from a previous user who did not end it. 'Veuillez patienter' means please wait.

3. 3

   Try unplugging and reconnecting

   Many charger errors clear themselves when you unplug, wait 30 seconds, and plug in again. This resets the communication between your vehicle and the charger.

4. 4

   End any stuck session in the Le Plein app

   If the charger thinks a session is still active from a previous user, you may not be able to start a new one. Check the app to see if there is an active session on that charger. Sometimes you need to wait for it to time out.

5. 5

   Move to another charger if the error persists

   If the same error appears after two or three attempts, the charger likely has a hardware or software issue. Try another charger at the same station, or drive to the next Le Plein or alternative station.

Support phone line in French only

Le Plein's support phone line is staffed by French-speaking agents. If you need help at a station and do not speak French, communication can be difficult.

Symptoms

• You called support and the agent speaks only French
• The automated phone menu is in French with no language option
• You cannot explain your problem over the phone
• You need urgent help at a station but cannot communicate effectively

How to Fix It

1. 1

   Try the app's support or help section first

   Written support through the app (email, contact form, or chat) gives you time to use a translation tool. Type your question in English, translate it to French, and paste it. This is often more effective than a phone call.

2. 2

   Prepare a few key phrases in advance

   If you may need to call, have these ready: 'La borne ne fonctionne pas' (the charger is not working), 'Le câble est bloqué' (the cable is stuck), 'J'ai besoin d'aide' (I need help), and the station number or location name.

3. 3

   Use a real-time translation app during the call

   Google Translate's conversation mode can translate speech in both directions. It is not perfect, but it helps bridge the gap. Open it before you call.

4. 4

   Ask a nearby person for help if available

   If you are at a station and someone nearby speaks both French and your language, asking for a quick translation assist is perfectly reasonable. Most people are happy to help.