Tesla Model 3 Charging at ABC-lataus

Tesla Model 3 Charger Won't Start a Charging Session

You have plugged in your Model 3, the charge port light is doing something weird, and nothing is happening. This is one of the most common frustrations for EV drivers. The good news is that it is almost always fixable on the spot. The cause is usually authentication, the charge port latch, or the charger itself.

Symptoms

• Charge port LED flashes amber or red after plugging in the CCS2 connector
• Touchscreen shows an error message instead of the charging screen
• Charger display says 'Waiting for vehicle' or 'Authentication failed'
• Charge port will not open when pressing the button on the connector
• Supercharger session does not start automatically after plugging in

What to Do

1. 1

   Unplug and replug the connector firmly

   Pull the connector out completely. Wait 5 seconds. Push it back in firmly until you hear a click and the charge port LED turns green or starts pulsing. On CCS2, the lower DC pins need to seat fully.

2. 2

   Check the touchscreen for error messages

   Look at the charging screen on the touchscreen. It will tell you if there is an error, if scheduled charging is active, or if the car is waiting for something. If Scheduled Charging is delaying the session, tap 'Charge Now' to override it.

3. 3

   Authenticate with the charging network

   At non-Tesla chargers, open the network's app (Ionity, Shell Recharge, or whichever network). Start the session through the app, or tap your RFID card on the charger. At Tesla Superchargers, this step is automatic.

4. 4

   Try the manual charge port release if the port is stuck

   If the charge port will not open, try tapping your Tesla key card on the B-pillar and pressing the charge port door. You can also open it from the touchscreen under Controls. In freezing weather, pour lukewarm water around the port to melt ice. Never force it.

5. 5

   Restart the touchscreen

   Hold both scroll wheels on the steering wheel for about 10 seconds until the Tesla logo appears. This restarts the infotainment system and can clear communication errors between the car and the charger.

6. 6

   Try a different charger or stall

   If nothing works, the charger may be faulty. Move to a different stall or station. At Superchargers, the Tesla app shows stall availability in real time.

Tesla Model 3 Payment Failed at the Charging Station

You plugged in, everything looked fine, and then the charger says payment failed. Or the session will not start because authentication did not go through. Payment problems are different at Tesla Superchargers versus non-Tesla CCS2 chargers, so the fix depends on where you are.

Symptoms

• Charger display shows 'Payment failed' or 'Transaction declined' after tapping a card
• Tesla Supercharger session will not start and the Tesla app shows a billing error
• Non-Tesla CCS2 charger shows 'Authentication failed' after scanning RFID or using an app
• Contactless payment terminal on the charger does not respond to your bank card
• Charging starts but stops after a few seconds with a payment-related error on the charger screen

What to Do

1. 1

   Check if this is a Tesla Supercharger or a non-Tesla station

   At Tesla Superchargers, payment is automatic through your Tesla account. At non-Tesla CCS2 chargers, you need to authenticate separately. The fix is completely different for each.

2. 2

   For Superchargers: update your payment method in the Tesla app

   Open the Tesla app, go to Account, then Payment. Check that your card is current and not expired. Add a new card if needed. Then try the Supercharger again. The session should start automatically after plugging in.

3. 3

   For non-Tesla chargers: authenticate through the network app

   Open the charging network's app (Ionity, Shell Recharge, Virta, or whichever network runs the charger). Select the charger, start the session, then plug in. Make sure the app shows your payment method is valid.

4. 4

   Try a different payment method at the charger

   If the contactless terminal failed, try the network's app instead. If the app failed, try an RFID card. If you do not have the network's app, some chargers accept ad-hoc payments through a QR code on the charger.

5. 5

   Call your bank if repeated transactions are declined

   If your card keeps getting declined at chargers, your bank may be blocking charging transactions. Call the number on the back of your card and let them know you are making EV charging payments. They can whitelist these merchants.

6. 6

   Move to a different charger if the payment terminal is broken

   If the charger's payment terminal is physically unresponsive, try a different stall. Report the broken terminal through the network's app so they can fix it.

Tesla Model 3 Charging Slower Than Expected at Charger

You plugged in your Model 3 expecting 175 kW and the touchscreen shows 50 kW. Or your home wallbox is stuck at 3 kW instead of 11 kW. Slow charging on the Model 3 is almost never a defect. It is usually the battery temperature, a charger limitation, or a setting you can fix on the touchscreen in under a minute.

Symptoms

• DC fast charging power well below the 175 kW maximum shown on the touchscreen
• AC home charging stuck at 3-4 kW instead of the expected 11 kW
• Charging speed drops sharply after reaching 50-60% on the touchscreen
• Supercharger shows lower kW than the stall is rated for
• Touchscreen charging animation shows a slow trickle instead of rapid charging

What to Do

1. 1

   Check the battery temperature on the touchscreen

   Tap the charging icon on the touchscreen. If the battery is cold, you will see a snowflake icon or a message about reduced charging speed. To fix this, use the Tesla nav to route to a Supercharger. The car will automatically precondition the battery during the drive.

2. 2

   Check your state of charge

   If you are above 80%, the slower speed is expected. For the fastest DC charging, arrive between 10-20%. The Model 3 LFP hits peak power in the 10-50% range.

3. 3

   Move to an unpaired Supercharger stall

   Look at the stall numbers. If they are labeled in pairs (1A/1B, 2A/2B), pick a stall where the paired stall is empty. At V3 or V4 Superchargers, this is not an issue.

4. 4

   Check the AC charge current limit

   On the touchscreen, go to Controls, then Charging. Look for the charge current slider or setting. Make sure it is set to the maximum value. This only affects AC charging, not Supercharging.

5. 5

   Try a different charger or stall

   If speeds are still low, the charger may be degraded. Try a different stall at the same location. On non-Tesla CCS chargers, some stations deliver less power than advertised.

6. 6

   Check for a software update

   Go to Controls, then Software on the touchscreen. If an update is available, install it. Tesla occasionally adjusts charging curves through software updates.

Session fails to start or charger shows an error

You plug in and try to authenticate, but the charger does not begin charging. This can happen due to communication issues between your vehicle and the charger, or a problem with authentication.

Symptoms

• Charger shows an error after you try to start a session
• Contactless card payment does not work at this station (older unit without payment terminal)
• Card reader beeps but the session does not start
• The app says the session is starting but nothing happens at the charger

How to Fix It

1. 1

   Unplug, wait 30 seconds, and try again

   The initial communication handshake between your vehicle and the charger can fail. Unplug the connector, wait at least 30 seconds, and reconnect. The second attempt often works.

2. 2

   Try starting the session through the ABC-lataus app

   If the card reader is not cooperating, open the ABC-lataus app, select the station, and start the session from your phone. This bypasses the physical card reader entirely.

3. 3

   Try contactless card payment at newer stations

   Some newer ABC-lataus high-power stations have a contactless payment terminal. If the app is not cooperating, look for a card reader on the charger unit and tap your bank card. Older stations may not have this option.

4. 4

   Try a different charger unit at the same station

   If the station has multiple charger units, switch to another one. One unit may have a hardware issue while the others work fine.

Finding the EV charger at a busy fuel station

ABC-lataus chargers are located at ABC fuel stations, which also serve diesel and petrol vehicles. The EV charging spots can be easy to miss if you are visiting for the first time.

Symptoms

• You arrived at the ABC station but cannot see the EV charger
• The charger is behind the fuel pump area or in a separate parking section
• Other vehicles (non-EV) are parked in the charging spots
• Signage is not visible from the main road entrance

How to Fix It

1. 1

   Check the ABC-lataus app for the charger's exact location

   The app shows station details including photos or layout hints. Some ABC stations place chargers at the far end of the parking area, away from the fuel pumps.

2. 2

   Look for the CCS2 cable and charging unit

   The charger unit is taller than a fuel pump and usually has a clearly different design. Look for a separate bay with a CCS2 cable, often marked with green signage or an EV symbol on the ground.

3. 3

   Drive past the fuel pumps

   At many ABC stations, the EV charger is positioned after the fuel pump area or in a dedicated corner of the parking lot. Do not stop at the fuel pumps. Continue through and scan for the charging unit.

4. 4

   If an ICE vehicle is blocking the spot, report it

   ABC stations serve all types of vehicles. If a non-EV is parked in the charging bay, contact ABC customer service through the app. Unfortunately, there is not much you can do in the moment besides trying another station.

App setup confusion within the S-Group ecosystem

The ABC-lataus app is part of the S-Group digital ecosystem. If you already use S-mobiili for groceries or fuel, the relationship between the apps can be confusing.

Symptoms

• You are not sure whether to use S-mobiili or the ABC-lataus app
• Your S-Group login works in one app but not the other
• Charging payments do not appear in your S-mobiili transaction history
• You created a new account instead of linking your existing S-Group membership

How to Fix It

1. 1

   Use the ABC-lataus app for starting and managing charging sessions

   While S-mobiili handles your broader S-Group membership, the ABC-lataus app is the dedicated tool for finding stations, starting sessions, and viewing charging history. Install it separately from the App Store or Google Play.

2. 2

   Log in with your existing S-Group credentials

   Use the same username and password you use for S-mobiili or s-kanava.fi. Do not create a new account.

3. 3

   Check payment method settings in the ABC-lataus app

   Even if you have a payment card saved in S-mobiili, the ABC-lataus app may require you to add a payment method separately. Go to settings or payment in the ABC-lataus app and add your card there.

4. 4

   Verify your account is set up for charging

   Check the ABC-lataus app settings to make sure your payment method is saved and charging is enabled.

Connector stuck or difficult to insert in winter cold

Finnish winters mean temperatures well below freezing. The CCS2 connector locking mechanism and the vehicle's charge port can freeze, making it hard to plug in or unplug.

Symptoms

• The CCS2 connector will not click into your vehicle's charge port
• The connector is plugged in but the locking mechanism will not engage
• You cannot release the connector after charging is complete
• The connector handle feels stiff or the release button is frozen

How to Fix It

1. 1

   Check your vehicle's charge port for ice

   Open the charge port door and look for ice buildup around the opening or inside the port. Brush away any loose ice or snow with your hand or a soft brush. Do not use sharp tools, as you can damage the pins.

2. 2

   Warm the connector in your hands for a moment

   If the connector handle feels frozen stiff, hold it in your hands for 30 seconds to warm the mechanism slightly. The locking button and release lever work better when they are not frozen solid.

3. 3

   Push the connector in firmly and straight

   In cold weather, plastic contracts and tolerances get tighter. Line up the connector carefully and push it in with steady, even pressure. Do not force it at an angle.

4. 4

   If the connector is stuck after charging, try unlocking from your car

   Use your vehicle's unlock button or the in-car menu to release the charge port lock. Some vehicles also release the connector when you unlock the doors. If it is still stuck, wait a few minutes. The charging session generates heat that may free the mechanism.

5. 5

   Contact support if the connector will not release

   Do not yank the connector. Forcing it can damage both the cable and your vehicle's charge port. Call ABC-lataus support and they can guide you through a remote release or send help.

Charging session starts but power delivery is low

The charger is rated for 200 kW, but your session is delivering significantly less. Several factors specific to ABC-lataus stations can contribute.

Symptoms

• Dashboard shows 30 to 50 kW at a 200 kW rated charger
• Charging speed drops after a few minutes
• Speed is lower than what you get at other fast chargers
• The charger screen shows a lower maximum than 200 kW

How to Fix It

1. 1

   Check your vehicle's maximum DC charging rate

   A 200 kW charger does not mean your vehicle can accept 200 kW. Many EVs max out at 50 to 150 kW depending on the model, battery temperature, and state of charge. Check your vehicle's specifications.

2. 2

   Consider battery temperature in Finnish conditions

   Cold batteries accept less power. If your vehicle has been parked outside in freezing temperatures, the battery may need to warm up before it can accept higher charging speeds. Some vehicles have a preconditioning feature you can activate before arriving.

3. 3

   Check if another vehicle is sharing the station's power

   Some ABC-lataus locations share power between charger units. If another vehicle is charging at the same station, your available power may be split. This is normal and not a fault.

4. 4

   Arrive with a lower state of charge for faster charging

   Charging is fastest between 10% and 50% state of charge. If you arrive at 60% or higher, the charger will taper the power to protect your battery. This is your vehicle's doing, not the charger's.