Renault Scenic E-Tech Charging at Atlante

Renault Scenic E-Tech Electric Charger Won't Start

Your Renault Scenic E-Tech is connected to a charger, but the session will not start. The OpenR display shows nothing, the charger sits idle, or you see an error. This is one of the most common problems at public charging stations, and it usually has a straightforward solution.

Symptoms

• The charger display stays on 'connect vehicle' after plugging in
• The OpenR display does not show any charging activity
• The Scenic's charge port light does not illuminate
• An error code appears on the charger screen
• The CCS2 connector does not click into the port

What to Do

1. 1

   Unlock the car and open the charge port

   Ensure the Scenic is unlocked. Press the charge port flap to open it fully. The port is on the right side of the car.

2. 2

   Insert the connector until it clicks

   Push the CCS2 or Type 2 connector straight into the port. A firm click and the charge port light illuminating confirm a good connection.

3. 3

   Authenticate at the charger

   Tap your RFID card, start the session in your charging app, or use contactless payment. Wait for the charger screen to confirm before expecting power flow.

4. 4

   Check the OpenR display for scheduling conflicts

   In the OpenR display, go to EV settings and look for charging schedules. If one is set, disable it to allow immediate charging.

5. 5

   Disconnect and retry

   Remove the cable, wait 10 seconds, and reconnect. This resets the communication between the Scenic and the charger.

6. 6

   Move to another charger

   If the charger still will not start, it is likely broken. Try a different stall or station and report the faulty unit through the network app.

Renault Scenic E-Tech Charging Payment Failed: Fix

Your Renault Scenic E-Tech is plugged in, but the charger will not accept your payment. RFID card not recognized, app throwing errors, or bank card declined. This is not a car problem, but it keeps you from charging. Here is how to work around it.

Symptoms

• The charger displays 'authentication failed' or 'payment declined'
• Your RFID card gets no response from the charger reader
• The charging app fails when trying to start a session
• Contactless bank card is declined at the charger terminal
• The charger prompts for payment but none of your methods work

What to Do

1. 1

   Try a different payment method

   If your RFID fails, try the charging app. If the app fails, try contactless bank card. Most chargers accept multiple payment options.

2. 2

   Verify your account and payment details

   Open the charging app and check that your payment method is current. For prepaid accounts, ensure sufficient balance.

3. 3

   Check which networks this charger supports

   Look at the charger for logos of accepted providers. If your provider is not listed, you need ad-hoc payment.

4. 4

   Scan the QR code for ad-hoc payment

   Most European chargers have a QR code. Scan it with your phone to open a browser-based payment page. Pay with any credit or debit card, no app required.

5. 5

   Cancel and retry

   If payment seemed to work but charging did not start, cancel the session and try again. A fresh authorization attempt can resolve intermittent failures.

6. 6

   Call the network support line

   Most chargers display a support phone number. The operator can sometimes start sessions remotely or diagnose the payment issue.

Renault Scenic E-Tech Charging Slow: How to Fix It

Your Renault Scenic E-Tech Long Range supports up to 150kW DC fast charging, which should make road trips manageable. But if the OpenR display shows much lower numbers, your stops are taking longer than they need to. Here is what limits the Scenic's charging speed and how to fix it.

Symptoms

• DC charging power shown on the OpenR display is well below 150kW
• Charging the 87kWh battery takes significantly longer than expected
• Speed drops sharply above 70% state of charge
• AC charging is stuck at 11kW even at a faster AC station
• The OpenR display shows a battery temperature or conditioning message

What to Do

1. 1

   Check charging power on the OpenR display

   The Scenic's OpenR display shows the current kW, battery temperature, and estimated time. Compare the kW figure to the charger's rated output to identify the bottleneck.

2. 2

   Precondition the battery before arriving

   Set the charging station as your destination in the Scenic's navigation system. The car will automatically warm the battery to the right temperature while driving, which is especially important in cold weather.

3. 3

   Find a charger rated at 150kW or more

   Use the My Renault app or a charger map to locate high-power CCS2 stations. Ionity and Fastned locations typically offer chargers that can deliver the Scenic's full 150kW.

4. 4

   Pick an unshared stall

   At charging parks with paired stalls, choose a pair where the other stall is free. This avoids power sharing and gives the Scenic full access to the charger's output.

5. 5

   Charge between 10% and 80%

   Plan stops to arrive between 10% and 15% and leave at 80%. With 87kWh of capacity, 80% gives you substantial range while keeping each stop fast.

6. 6

   Check for software updates

   Renault releases updates that can improve charging performance. Check the OpenR display for available updates or ask at your Renault dealer.

New station with teething problems

Atlante is expanding rapidly, and many stations are brand new. Newly installed chargers sometimes have firmware bugs, incomplete network configuration, or hardware that has not been fully tested under real-world conditions.

Symptoms

• Charger turns on but fails to communicate with your vehicle
• Session starts but drops after a few seconds
• Charger screen shows an error code you have never seen before
• Station appears on the map but the chargers are not yet operational

How to Fix It

1. 1

   Try a different charger at the same station

   New stations often have multiple units and the issue may be limited to one charger. Try another unit before giving up on the location.

2. 2

   Unplug, wait 30 seconds, and retry

   New charger firmware sometimes fails on the first handshake but succeeds on the second attempt. A short wait lets the charger reset its session state.

3. 3

   Start the session through the Atlante app

   If the charger's screen or contactless reader is not working properly, the app provides a separate communication path to the charger's backend. This can bypass local hardware issues.

4. 4

   Check the Atlante app for station status notes

   Atlante sometimes posts notices about newly activated stations that are still in testing. The station detail page in the app may show a note about limited functionality.

5. 5

   Report the issue and move to the next station

   Use the Atlante app to report the problem. New station issues are usually fixed quickly once reported. Check the app for the nearest alternative Atlante or competitor station.

App crashes on older phones

The Atlante app can be unstable on older phones or phones running outdated operating systems. The app may crash during login, while loading the map, or in the middle of starting a session.

Symptoms

• App closes unexpectedly when you open the station map
• App freezes during the payment screen
• Login screen loads but the app crashes after entering credentials
• App works briefly but crashes when you try to start a session

How to Fix It

1. 1

   Update the Atlante app to the latest version

   Atlante pushes frequent updates that fix stability issues. Open the App Store or Google Play and check for updates before your trip.

2. 2

   Clear the app cache

   On Android, go to Settings, Apps, Atlante, and clear the cache. On iPhone, delete and reinstall the app. Corrupted cache data is a common cause of crashes.

3. 3

   Check your phone's operating system version

   The Atlante app may require iOS 15+ or Android 10+. If your phone is on an older version, update if possible. If your phone cannot update, you may need a roaming app as a backup.

4. 4

   Use contactless payment as a fallback

   If the app keeps crashing and the station supports contactless, tap your credit or debit card on the charger's payment terminal. Not all Atlante stations have this yet, but it completely bypasses the app.

5. 5

   Try a roaming app

   Apps like Chargemap, Shell Recharge, or Electropass can start sessions at Atlante stations without using the Atlante app. Check roaming coverage before relying on this.

Contactless payment terminal not activated

Atlante is rolling out contactless card payment across its network, but not every charger has an active terminal yet. Some units have the hardware installed but the payment function is not turned on.

Symptoms

• Card reader is visible on the charger but does not respond to a tap
• Screen says 'Use app to start' with no contactless option shown
• Contactless symbol is printed on the charger but the reader light is off
• You see a payment terminal but tapping produces no response

How to Fix It

1. 1

   Download and use the Atlante app

   At stations where contactless is not yet active, the Atlante app is the primary payment method. Download it before your trip and add a payment card in advance.

2. 2

   Check the charger screen for payment instructions

   Some Atlante chargers display which payment methods are currently available. If contactless is not listed, the terminal is not active at that unit.

3. 3

   Try a different charger at the same station

   Contactless activation sometimes rolls out unit by unit. Another charger at the same station may have an active terminal.

4. 4

   Use a roaming RFID card or app

   If you have an RFID card from a roaming provider, try tapping it. Some Atlante stations accept roaming RFID even when the contactless card terminal is not active.

Charger screen hard to read in direct sunlight

Some Atlante charger screens have low brightness levels that make them nearly impossible to read in bright sunlight. This is especially common at stations in Southern Europe during summer.

Symptoms

• Screen content is barely visible outdoors during the day
• You cannot read the price, status, or error messages on the screen
• Screen appears to be off but the charger is actually on
• You have to cup your hands around the screen to read it

How to Fix It

1. 1

   Use your body or hand to shade the screen

   Stand to block direct sunlight from hitting the screen. Even partial shade can make the display readable.

2. 2

   Take a photo of the screen with your phone

   Your phone camera can sometimes capture what your eyes cannot. Take a photo and zoom in to read the text.

3. 3

   Use the Atlante app to monitor your session

   All session information (charging speed, energy delivered, cost, estimated time) is available in the app. You do not need the charger screen to track your session.

4. 4

   Start the session entirely through the app

   If you cannot read the screen at all, use the Atlante app to select the charger, start the session, and stop it when done. This avoids needing to interact with the screen.

Cable connector requires specific angle to lock

Some Atlante charger cables need to be inserted at a particular angle or with extra force for the CCS2 connector to seat properly. If it is not fully locked, the session will not start.

Symptoms

• Connector feels like it is in but the charger does not recognize it
• Charger screen says 'Connect cable' even though the cable is plugged in
• You hear a partial click but the connector is not locked
• Connector slides back out after you let go

How to Fix It

1. 1

   Push the connector straight in, then slightly upward

   Some Atlante CCS2 connectors need a slight upward tilt after the initial push to engage the locking mechanism. You should feel and hear a solid click.

2. 2

   Check for debris in the vehicle's charging port

   Dust, ice, or a small pebble in the port can prevent the connector from seating fully. Inspect the port and brush out anything you find.

3. 3

   Make sure the vehicle is unlocked and ready to charge

   Some vehicles lock the charging port flap or disable the inlet when the car is locked or in drive mode. Ensure the car is in park and unlocked.

4. 4

   Try a different cable if the charger has two

   If the charger has two CCS2 cables, try the other one. One cable may have a slightly worn connector that does not seat as easily.