Porsche Taycan Charging at REWE Charging

Porsche Taycan Charger Will Not Start a Session

You are at the charger, the CCS2 connector is in, but nothing happens. The charger screen stays on the start page, or shows an error and resets. Charger startup problems on the Taycan are almost always about the connector fit, the charge port location, or authentication. Here is how to get the session going.

Symptoms

• Charger screen stays on the welcome page after plugging in
• Charger displays an error code and resets to the start screen
• Charge port light on the Taycan does not turn on or blinks red
• CCS2 connector clicks in but the car does not acknowledge it
• Charger says 'Vehicle not detected' or 'Communication error'

What to Do

1. 1

   Reinsert the CCS2 connector firmly

   Remove the connector completely, check for debris or ice in the Taycan's charge port, and reinsert it straight and firm until you hear and feel a click. The charge port light should turn on.

2. 2

   Check the charge port flap

   Make sure the charge port door on the right rear is fully open. If it is stuck, gently push it. In freezing conditions, use warm water (never force it) to free any ice. The flap must be clear of the connector path.

3. 3

   Confirm the car is in Park

   Check the PCM display to make sure the Taycan is in Park. Also check that no charging timer or schedule is blocking immediate charging. Go to Settings, then Charging, and verify that direct charging is enabled.

4. 4

   Authenticate with the charger

   Tap your RFID card, start the session in the charger operator's app, or use Porsche Charging Service through the My Porsche app. Make sure you select the correct stall number if using an app. Wait for the charger to confirm authorization before expecting the session to begin.

5. 5

   Try a different stall or station

   If the charger still will not start after reinserting the connector and authenticating, the charger may be faulty. Try a different stall at the same location. If all stalls fail, move to the nearest alternative station.

6. 6

   Restart the Taycan's infotainment system

   In rare cases, restarting the PCM can resolve communication issues. Hold down the center display button for about 10 seconds until the screen goes dark, then release. Wait for it to restart and try plugging in again.

Porsche Taycan Charging Payment Failed at Station

You are at the charger, your Taycan is plugged in, but the payment will not go through. The charger says 'Authorization failed' or the Porsche Charging Service app is not connecting. Payment issues are one of the top reasons a charging session never starts. Most of the time, the fix takes less than two minutes.

Symptoms

• Charger screen shows 'Authorization failed' or 'Payment declined'
• Porsche Charging Service does not start the session automatically
• RFID card tap produces an error or no response from the charger
• Contactless bank card is declined at the charger's payment terminal
• Charger accepts payment but the session ends immediately with zero kWh

What to Do

1. 1

   Check Porsche Charging Service status

   Open the My Porsche app and check your Charging Service contract. Make sure it is active and your payment method on file is valid. If it has expired, renew it or switch to a different payment method at the charger.

2. 2

   Try the charger operator's app

   Look for the network name on the charger (Ionity, Shell Recharge, Allego, EnBW, etc.). Open their app, add a payment method if you have not already, and start the session. Make sure the stall number in the app matches the number on the charger you are using.

3. 3

   Try a different payment method

   If your primary method fails, switch to a backup. Try a different RFID card, a different bank card for contactless, or a different charging app. Having at least two options covers most situations.

4. 4

   Check your card balance

   Open your banking app and verify you have enough available balance for the pre-authorization hold. Previous charging sessions may have pending holds that reduce your available balance temporarily.

5. 5

   Reset the charger and try again

   Press the stop or reset button on the charger. Wait for it to return to the welcome screen. Unplug the connector from your Taycan, wait 30 seconds, plug back in, and authenticate again.

6. 6

   Move to a different stall or station

   If nothing works, try a different stall at the same station. Payment terminals can fail independently. If the entire station is not processing payments, use your Taycan's PCM navigation or Google Maps to find the nearest alternative.

Porsche Taycan Charging Slower Than Expected

You plugged in your Porsche Taycan expecting 270 kW and the Porsche Communication Management screen shows 80 kW. Or your wallbox is stuck at 3 kW instead of 11 kW. The Taycan has one of the fastest charging architectures on the market, but real-world speeds depend on battery temperature, charger capability, and a few settings you can check yourself.

Symptoms

• DC fast charging speed well below the 270 kW maximum
• AC home charging stuck at 3-4 kW instead of 11 kW or 22 kW
• Charging speed drops sharply after reaching 50-60%
• PCM shows lower power than the charger's rated output
• Charging session starts fast but slows down within minutes

What to Do

1. 1

   Use Porsche navigation for preconditioning

   Enter your charging stop as a destination in the Porsche Communication Management system. The Taycan will automatically precondition the battery to the ideal temperature during the drive. This is the single most effective way to reach peak charging speeds.

2. 2

   Check if the charger supports 800V

   Look at the charger's specifications, usually printed on the unit or shown in the operator's app. Chargers rated at 350 kW (like Ionity HPC) typically support 800V. If the charger is 50 kW or 150 kW, expect lower speeds regardless of your Taycan's capability.

3. 3

   Check your state of charge

   If you are above 80%, the slower speed is by design. For the fastest charging, arrive between 5-20% and charge to 80%. The Taycan's charging curve is steepest in this range.

4. 4

   Verify your AC charging setup

   For home charging, check whether your wallbox is wired for 3-phase power. In the Taycan's charging settings on PCM, confirm the AC charge current is set to maximum. If you have the 22 kW AC option, your wallbox must also support 22 kW.

5. 5

   Try a different charger or stall

   If speeds remain low at a DC charger, move to an unoccupied stall or a different station. Some chargers degrade over time and deliver less than their rated power. The My Porsche app or Porsche Charging Service can help find 800V-capable chargers nearby.

Charger occupied by non-charging vehicles

You arrive at the REWE charger and a car is parked in the charging spot without being plugged in. This is common at supermarket locations where shoppers treat EV spots as regular parking.

Symptoms

• Charging spot is occupied by a car with no cable connected
• ICE vehicle parked in the EV charging bay
• Car is plugged in but session has clearly ended and the driver is inside shopping
• All charging spots taken despite the app showing the charger as available

How to Fix It

1. 1

   Check if the other car is actively charging

   Look at the charger display or connector. If the session has ended and the car is just parked, REWE cannot remotely move it. The app status reflects the charger, not the parking spot.

2. 2

   Ask at the REWE customer service desk

   REWE staff can sometimes make a store announcement asking the vehicle owner to move. This works more often than you would expect.

3. 3

   Wait briefly or shop first

   At supermarket chargers, turnover is high. Most shoppers leave within 30 to 45 minutes. Do your shopping and check again.

4. 4

   Check for additional REWE locations nearby

   Many German cities have multiple REWE stores with chargers within a short drive. Check the app for the next closest option.

Contactless card reader not responding

You tap your debit or credit card on the reader but nothing happens. The reader does not beep, does not show a light, or shows an error briefly before resetting.

Symptoms

• Card reader shows no response when you tap
• Reader beeps but the screen shows an error
• Card works at the REWE checkout inside but not at the charger
• Contactless symbol is visible on the reader but it seems inactive

How to Fix It

1. 1

   Hold your card flat against the reader for 3 to 5 seconds

   Some REWE charger readers are slower than store payment terminals. Hold the card still and wait for the full processing time.

2. 2

   Remove your phone and other cards from the area

   If you hold your wallet with multiple contactless cards near the reader, it may detect interference and reject the transaction.

3. 3

   Try the charging app instead

   If contactless is not working, start the session through the REWE charging partner app. This bypasses the physical card reader entirely.

4. 4

   Check if the reader is physically damaged

   Supermarket chargers are exposed to shopping carts, weather, and heavy foot traffic. If the reader looks cracked or the screen is damaged, report it to REWE staff inside and try another stall if available.

Session ends due to maximum stay time limit

Your charging session stops before the battery is full because REWE enforces a maximum parking time at the charging spot. This exists to keep spots available for other shoppers.

Symptoms

• Charging stops after 60 to 90 minutes even though the battery is not full
• App notification says session ended due to time limit
• You return from shopping to find the charger disconnected
• Charger screen shows session completed despite low battery level

How to Fix It

1. 1

   Check the posted time limit before you start

   REWE typically allows 60 to 120 minutes depending on the location. Look for signage near the charger or check the app for time restrictions at that specific store.

2. 2

   Plan your charge around your shopping time

   At up to 300 kW, most EVs can gain 150 to 250 km of range in 30 to 45 minutes. A normal grocery run is usually enough time for a meaningful charge.

3. 3

   Move your car if you need more time

   If you need a longer session, move your car to a regular parking spot after the time limit and start a new session if the charger is free when you return.

4. 4

   Use REWE chargers for top-ups, not full charges

   Supermarket chargers work best for adding range while you shop, not for charging from 10% to 100%. If you need a full charge, plan for a dedicated fast charging station.

Poor mobile signal in underground or garage parking

Some REWE stores have chargers in basement or covered parking areas where mobile signal is weak. This can prevent the app from starting a session or processing contactless payments.

Symptoms

• App shows 'No connection' or spins without loading
• Contactless payment times out during processing
• You cannot scan the QR code on the charger because the page will not load
• Session starts but the app loses connection and cannot show charging status

How to Fix It

1. 1

   Connect to REWE store WiFi if available

   Many REWE stores offer free WiFi that may reach the parking area. Check for a REWE network in your phone's WiFi settings.

2. 2

   Walk closer to the garage entrance to start the session

   If you need the app to start the session, walk toward the exit where signal is stronger, start the session remotely, then return to your car.

3. 3

   Use contactless payment instead of the app

   Contactless card payments are processed through the charger's built-in connection, not your phone. If the card reader works, you do not need mobile signal.

4. 4

   Pre-load the app before entering the garage

   Open the app and navigate to the station page while you still have signal. Some apps cache enough data to start a session even with intermittent connectivity.

Charger unavailable outside store hours

You arrive at a REWE charger outside store opening hours and the charger is inaccessible or powered down. Some locations gate their parking areas or shut down chargers when the store closes.

Symptoms

• Parking area gate is locked and you cannot reach the charger
• Charger screen is dark and does not respond
• App shows the charger as available but the physical location is closed
• Barrier arm blocks entry to the parking lot after closing time

How to Fix It

1. 1

   Check store hours before planning a charge

   REWE stores in Germany typically close between 20:00 and 22:00 on weekdays and earlier on Saturdays. Most are closed on Sundays. If the charger is behind a gate, you cannot access it outside these hours.

2. 2

   Verify 24/7 access in the app

   Some REWE charging locations offer 24/7 access even when the store is closed. Check the station details in the app. If it does not mention 24-hour access, assume it follows store hours.

3. 3

   Leave the parking area before the store closes

   If you are charging and the store is about to close, make sure you can exit the parking area. Some locations lock the barrier after closing, which could trap your car overnight.

4. 4

   Find an alternative nearby charger

   Use a multi-network app like Chargemap or the EVcourse charger finder to locate a 24/7 charger nearby. Dedicated charging stations along main roads usually operate around the clock.