Volkswagen ID.7 Charging at REWE Charging

Volkswagen ID.7 Charger Will Not Start a Session

You plugged your ID.7 into a charger and nothing is happening. The infotainment display shows no charging activity, and the charger is just sitting there. Whether you are at a DC fast charger or an AC destination charger, the ID.7 shares the same MEB platform quirks as the ID.4 and ID.3, plus a few things specific to the flagship sedan.

Symptoms

• CCS2 connector plugged into the right rear charge port but the charger shows 'Waiting'
• Infotainment display shows no charging animation or progress after connecting
• Charger display says 'Authorization required' even after tapping your card
• Charge port on the right rear does not show any LED indicator change
• We Charge or Elli app shows the car as connected but not actively charging

What to Do

1. 1

   Unplug and reseat the CCS2 connector

   Remove the connector from the right rear charge port completely. Wait five seconds. Push it back in firmly until you hear the latch click. Make sure both the Type 2 portion and the two DC pins below are fully engaged.

2. 2

   Authorize the session manually

   Check the charger display for authorization prompts. Tap your RFID card, open the operator's app, or use contactless payment. Do not rely on Plug & Charge working unless you have confirmed it is active in the We Charge app.

3. 3

   Disable scheduled charging

   On the ID.7's infotainment display, go to the charging settings. If a departure timer or scheduled charging is active, disable it or select 'Charge Now' to start immediately.

4. 4

   Verify Plug & Charge in the We Charge app

   Open the We Charge or Elli app on your phone. Check that Plug & Charge is enabled and your payment method is current. If it was never activated, you will need to use manual authorization at every station.

5. 5

   Restart the infotainment system

   Press and hold the power button on the infotainment display for about 10 seconds until the screen goes black and reboots. This can resolve communication issues between the ID. Software and the charger. The car stays operational during the reboot.

6. 6

   Try a different charger or stall

   If the session still will not start, the charger may be faulted. Try a different connector at the same location or find a nearby station using the We Charge app or the ID.7's built-in charger finder.

Volkswagen ID.7 Payment Failed at Charging Station

You are at the charger, your ID.7 is plugged in, but the payment will not go through. The charger shows an error or just sits there waiting. Payment failures at public chargers are frustratingly common, and they almost never have anything to do with your car. Here is how to get past it and start charging.

Symptoms

• Charger displays 'Payment failed' or 'Authorization error' after tapping your card
• RFID card is not recognized by the charger reader
• We Charge or Elli app shows an error when trying to start a remote session
• Plug & Charge does not activate after plugging in the CCS2 connector on the right rear
• Contactless payment terminal on the charger rejects your bank card

What to Do

1. 1

   Try a different payment method

   If your RFID card failed, try contactless with your bank card or phone. If contactless failed, try the charger operator's app. Having at least two different payment options covers most failure scenarios.

2. 2

   Check the We Charge or Elli app

   Open the We Charge or Elli app on your phone. Verify your account is active, your payment method is valid, and Plug & Charge is enabled. Try starting the session remotely through the app.

3. 3

   Scan the charger QR code

   Most public chargers have a QR code. Scan it with your phone camera to open the operator's browser payment page. You can usually pay with a credit card directly without installing their app.

4. 4

   Check your banking app for blocked transactions

   Open your banking app and look for flagged or declined payments. If the charging transaction was blocked, approve it and retry the payment at the charger.

5. 5

   Try Plug & Charge by replugging

   If the charger supports Plug & Charge and your ID.7 has it activated through We Charge, unplug the CCS2 connector from the right rear charge port, wait a few seconds, and replug. Payment should authorize automatically through the cable.

6. 6

   Move to a different charger

   If nothing works, the charger's payment system may be down completely. Find a nearby alternative using the We Charge app or the ID.7's built-in charger finder on the infotainment display.

Volkswagen ID.7 Charging Slower Than Expected

You plugged in your ID.7 expecting 175 kW and the infotainment display shows 60 kW. Or your home wallbox is stuck at 3 kW instead of 11 kW. The ID.7 Pro has the fastest DC charging curve in VW's MEB lineup, but hitting peak speed depends on battery temperature, state of charge, and a few settings you can fix quickly.

Symptoms

• DC fast charging power well below the 175 kW peak shown on the infotainment display
• AC home charging stuck at 3-4 kW instead of the expected 11 kW on 3-phase
• Charging speed drops sharply after 50-55% during DC fast charging
• Infotainment display shows a much longer estimated charge time than expected
• Different CCS2 stations consistently deliver less power than the ID.7 should accept

What to Do

1. 1

   Check if battery preconditioning was active

   On the infotainment display, look for battery temperature indicators. If the pack was cold when you arrived, enable preconditioning in the We Charge or Elli app for your next DC stop. Setting a navigation route to a fast charger should also trigger automatic preconditioning on the ID.7.

2. 2

   Check your current state of charge

   If you are above 50%, the slower speed is expected on the 77 kWh NMC pack. For the fastest DC charging, arrive between 10-20%. The ID.7 Pro peaks between 10-35% and sustains higher power longer than the ID.3 or ID.4.

3. 3

   Verify the charger is not sharing power

   Check if another car is plugged into the same charging station. Some DC stations split power between two stalls from a shared cabinet. If possible, move to a unit where no other car is connected.

4. 4

   Check the AC charge current setting

   On the infotainment display, navigate to the charging settings. Look for the AC charge current or amperage limit and make sure it is set to maximum. This only affects AC charging at home or destination chargers.

5. 5

   Try a different charger

   If speeds remain low, the charger hardware may be the bottleneck. Try a different station. Use the We Charge app or the ID.7's built-in charger finder to locate a charger rated at 175 kW or higher.

6. 6

   Check for a software update

   Go to the settings menu on the infotainment display and check for ID. Software updates. VW has improved charging performance on MEB platform vehicles through software updates. The ID.7 launched with a refined charging curve compared to earlier MEB models.

Charger occupied by non-charging vehicles

You arrive at the REWE charger and a car is parked in the charging spot without being plugged in. This is common at supermarket locations where shoppers treat EV spots as regular parking.

Symptoms

• Charging spot is occupied by a car with no cable connected
• ICE vehicle parked in the EV charging bay
• Car is plugged in but session has clearly ended and the driver is inside shopping
• All charging spots taken despite the app showing the charger as available

How to Fix It

1. 1

   Check if the other car is actively charging

   Look at the charger display or connector. If the session has ended and the car is just parked, REWE cannot remotely move it. The app status reflects the charger, not the parking spot.

2. 2

   Ask at the REWE customer service desk

   REWE staff can sometimes make a store announcement asking the vehicle owner to move. This works more often than you would expect.

3. 3

   Wait briefly or shop first

   At supermarket chargers, turnover is high. Most shoppers leave within 30 to 45 minutes. Do your shopping and check again.

4. 4

   Check for additional REWE locations nearby

   Many German cities have multiple REWE stores with chargers within a short drive. Check the app for the next closest option.

Contactless card reader not responding

You tap your debit or credit card on the reader but nothing happens. The reader does not beep, does not show a light, or shows an error briefly before resetting.

Symptoms

• Card reader shows no response when you tap
• Reader beeps but the screen shows an error
• Card works at the REWE checkout inside but not at the charger
• Contactless symbol is visible on the reader but it seems inactive

How to Fix It

1. 1

   Hold your card flat against the reader for 3 to 5 seconds

   Some REWE charger readers are slower than store payment terminals. Hold the card still and wait for the full processing time.

2. 2

   Remove your phone and other cards from the area

   If you hold your wallet with multiple contactless cards near the reader, it may detect interference and reject the transaction.

3. 3

   Try the charging app instead

   If contactless is not working, start the session through the REWE charging partner app. This bypasses the physical card reader entirely.

4. 4

   Check if the reader is physically damaged

   Supermarket chargers are exposed to shopping carts, weather, and heavy foot traffic. If the reader looks cracked or the screen is damaged, report it to REWE staff inside and try another stall if available.

Session ends due to maximum stay time limit

Your charging session stops before the battery is full because REWE enforces a maximum parking time at the charging spot. This exists to keep spots available for other shoppers.

Symptoms

• Charging stops after 60 to 90 minutes even though the battery is not full
• App notification says session ended due to time limit
• You return from shopping to find the charger disconnected
• Charger screen shows session completed despite low battery level

How to Fix It

1. 1

   Check the posted time limit before you start

   REWE typically allows 60 to 120 minutes depending on the location. Look for signage near the charger or check the app for time restrictions at that specific store.

2. 2

   Plan your charge around your shopping time

   At up to 300 kW, most EVs can gain 150 to 250 km of range in 30 to 45 minutes. A normal grocery run is usually enough time for a meaningful charge.

3. 3

   Move your car if you need more time

   If you need a longer session, move your car to a regular parking spot after the time limit and start a new session if the charger is free when you return.

4. 4

   Use REWE chargers for top-ups, not full charges

   Supermarket chargers work best for adding range while you shop, not for charging from 10% to 100%. If you need a full charge, plan for a dedicated fast charging station.

Poor mobile signal in underground or garage parking

Some REWE stores have chargers in basement or covered parking areas where mobile signal is weak. This can prevent the app from starting a session or processing contactless payments.

Symptoms

• App shows 'No connection' or spins without loading
• Contactless payment times out during processing
• You cannot scan the QR code on the charger because the page will not load
• Session starts but the app loses connection and cannot show charging status

How to Fix It

1. 1

   Connect to REWE store WiFi if available

   Many REWE stores offer free WiFi that may reach the parking area. Check for a REWE network in your phone's WiFi settings.

2. 2

   Walk closer to the garage entrance to start the session

   If you need the app to start the session, walk toward the exit where signal is stronger, start the session remotely, then return to your car.

3. 3

   Use contactless payment instead of the app

   Contactless card payments are processed through the charger's built-in connection, not your phone. If the card reader works, you do not need mobile signal.

4. 4

   Pre-load the app before entering the garage

   Open the app and navigate to the station page while you still have signal. Some apps cache enough data to start a session even with intermittent connectivity.

Charger unavailable outside store hours

You arrive at a REWE charger outside store opening hours and the charger is inaccessible or powered down. Some locations gate their parking areas or shut down chargers when the store closes.

Symptoms

• Parking area gate is locked and you cannot reach the charger
• Charger screen is dark and does not respond
• App shows the charger as available but the physical location is closed
• Barrier arm blocks entry to the parking lot after closing time

How to Fix It

1. 1

   Check store hours before planning a charge

   REWE stores in Germany typically close between 20:00 and 22:00 on weekdays and earlier on Saturdays. Most are closed on Sundays. If the charger is behind a gate, you cannot access it outside these hours.

2. 2

   Verify 24/7 access in the app

   Some REWE charging locations offer 24/7 access even when the store is closed. Check the station details in the app. If it does not mention 24-hour access, assume it follows store hours.

3. 3

   Leave the parking area before the store closes

   If you are charging and the store is about to close, make sure you can exit the parking area. Some locations lock the barrier after closing, which could trap your car overnight.

4. 4

   Find an alternative nearby charger

   Use a multi-network app like Chargemap or the EVcourse charger finder to locate a 24/7 charger nearby. Dedicated charging stations along main roads usually operate around the clock.