Polestar 2 Charging at Ionity

Polestar 2 Charger Won't Start or Begin Charging

You have plugged in your Polestar 2, the connector clicked, but nothing happens. The center display stays silent or shows an error. This is frustrating, but it is almost always fixable on the spot without calling support.

Symptoms

• CCS2 or Type 2 connector plugged in but no charging indicator on the center display
• Charger screen shows 'Waiting for vehicle' or stays on the start screen
• Polestar 2 charge port LED blinks but charging never begins
• Authentication succeeds on the charger but the session fails to start
• Center display briefly shows charging screen, then returns to idle

What to Do

1. 1

   Unplug and reconnect firmly

   Remove the CCS2 or Type 2 connector, wait 10 seconds, then reinsert it with a firm push until you hear a clear click. Watch the charge port LED on the Polestar 2 for a steady light.

2. 2

   Check for a charging schedule

   On the center display, go to Settings, then Charging. If a charging schedule is active, disable it or set it to 'Direct' so the car charges immediately when plugged in.

3. 3

   Restart the charger session

   On the charger, end the current session if one is shown. Then start a new session by tapping your RFID card or restarting in the charger's app. Some chargers have a physical start/stop button.

4. 4

   Try Plug & Charge or a different payment method

   If your Polestar 2 has Plug & Charge enabled, check the charger supports it. Otherwise, switch to a different RFID card, contactless payment, or the charger operator's app.

5. 5

   Reboot the car's infotainment system

   Press and hold the home button on the center display for about 15 seconds until the screen goes dark and restarts. Once it is back, try plugging in again. This resets the charging communication module.

6. 6

   Try a different charger or cable

   If the station has multiple stalls, move to a different one. If you are using a tethered cable, try bringing your own Type 2 cable. A faulty charger cable is more common than a faulty car.

Polestar 2 Charging Payment Failed at the Station

You are at the charger, your Polestar 2 is ready, but the payment will not go through. The charger says 'Authorization failed' or just does nothing after you tap your card. Payment issues are one of the most common reasons a charging session never starts, and they are usually fixable in a couple of minutes.

Symptoms

• Charger screen shows 'Authorization failed' or 'Payment declined' after tapping your card or RFID
• Charger app shows an error when trying to start a remote session for your Polestar 2
• Contactless bank card is declined even though it works at shops
• Plug & Charge does not activate automatically after plugging in the CCS2 connector
• Charger accepts payment but the session immediately ends with a zero-kWh charge

What to Do

1. 1

   Check if Plug & Charge is enabled

   On the Polestar 2 center display, go to Settings, then Charging. Confirm Plug & Charge is turned on. If it is on but the charger did not start automatically, this station likely does not support it. Use a different payment method.

2. 2

   Try the charger operator's app

   Look for the operator name on the charger (Ionity, Shell Recharge, Allego, etc.). Download their app if you do not have it, add a payment method, and start the session through the app. Make sure you select the correct stall number shown on the charger.

3. 3

   Try a different RFID card or payment method

   If you carry multiple charging cards, try a different one. Some roaming cards work across many networks. If you only have one card, try contactless payment with your bank card or phone if the charger supports it.

4. 4

   Check your bank card's available balance

   Open your banking app and check that you have enough available balance for the pre-authorization hold, which can be up to 50 EUR even for a short charge. Pending holds from previous charging sessions can temporarily reduce your available balance.

5. 5

   Restart the charger and try again

   Some chargers have a stop/reset button. Press it, wait for the screen to return to the start screen, then begin a fresh session. If there is no button, unplug your Polestar 2, wait 30 seconds, and replug.

6. 6

   Move to a different charger

   If nothing works at this stall, try a different stall at the same station. Payment terminals can fail independently. If the entire station is down, find the nearest alternative using the charger map on your Polestar 2 center display or Google Maps.

Polestar 2 Charging Slower Than Expected

You plugged in your Polestar 2 expecting 149 kW and the screen shows 40 kW. Or your home charger is stuck at 3 kW instead of 11 kW. Slow charging on the Polestar 2 is almost never a defect. It is usually the battery temperature, the charger itself, or a setting you can fix in two minutes.

Symptoms

• DC fast charging speed well below the 149 kW maximum
• AC home charging stuck at 3-4 kW instead of 11 kW
• Charging speed drops significantly after reaching 50-60%
• Charging session starts normally but slows down quickly
• Dashboard shows lower power than the charger's rated output

What to Do

1. 1

   Check the battery temperature

   Look at the charging screen on the center display. If the battery is cold (common in winter), drive for 15-20 minutes before charging or use the preconditioning feature through the Polestar app before arriving at the charger.

2. 2

   Check your state of charge

   If you are above 80%, the slower speed is normal. For fastest charging, arrive at the charger between 10-20% and charge to 80%.

3. 3

   Verify the charger is not shared

   Look at the charger unit. If there are two cables and someone is using the other one, you may be sharing power. Move to an unoccupied charger if available.

4. 4

   Check the AC charge current setting

   In the Polestar 2, go to Settings, then Charging. Make sure the charge current limiter is set to maximum. If it shows a lower value, increase it.

5. 5

   Try a different charger

   If the speed is still low, the charger itself may be degraded or faulty. Try a different charger at the same location or a different charging station.

Session won't start after contactless payment

You tap your card, the reader beeps, but the charger never begins delivering power. This is one of the most reported issues at Ionity stations.

Symptoms

• Contactless reader shows a green light but nothing happens
• Screen says 'Initializing' for more than 60 seconds
• Card is charged a pre-authorization hold but no energy is delivered
• Error message appears after the tap but disappears too quickly to read

How to Fix It

1. 1

   Unplug the cable and wait 10 seconds

   This resets the charger's session state. Plug the cable back in firmly until you hear the locking click.

2. 2

   Try a different payment method

   Open the Ionity app and start the session from there instead. If you have an Ionity subscription, use the app. App-initiated sessions bypass the contactless reader entirely.

3. 3

   Check your card's contactless limit

   Some banks block contactless transactions above a certain amount. Ionity may pre-authorize up to 100 EUR. If your bank flags this, the session fails silently.

4. 4

   Move to another stall at the same station

   Individual charger units can have faulty card readers while the rest of the station works fine. Try the next available stall.

5. 5

   Check for a pending hold on your bank statement

   If a hold was placed but no session started, it typically releases within 3 to 7 business days. You will not be charged for energy you did not receive.

Plug & Charge pairing fails

Your vehicle supports Plug & Charge (ISO 15118) but the Ionity station does not recognize it. The charger asks for payment instead of starting automatically.

Symptoms

• Charger prompts for app or card payment instead of starting automatically
• Screen shows 'Vehicle not recognized'
• Plug & Charge worked at this station before but stopped working
• Pairing completed in the Ionity app but the station still asks for payment

How to Fix It

1. 1

   Verify Plug & Charge is enabled in your vehicle settings

   Some vehicles (like Porsche Taycan, BMW iX, Mercedes EQS) have a toggle in the infotainment system. If it was turned off during a software update, the charger cannot identify your car.

2. 2

   Re-pair your vehicle in the Ionity app

   Go to the Ionity app, navigate to Plug & Charge settings, remove the existing pairing, and set it up again. This refreshes the digital certificate.

3. 3

   Check that your Ionity subscription is active

   Plug & Charge on Ionity requires an active subscription. If your subscription lapsed, the auto-start will fail even if the pairing is intact.

4. 4

   Try unplugging and re-plugging slowly

   The ISO 15118 handshake happens in the first few seconds. If you plug in too quickly or the connector is not fully seated, the handshake times out and the charger falls back to manual payment.

5. 5

   Start the session via the app as a fallback

   Plug & Charge issues are often caused by backend certificate mismatches. You can still charge at Ionity subscription rates by starting the session through the app while the issue is resolved.

Charger screen frozen or unresponsive

The charger display is stuck on a loading screen, shows garbled text, or does not respond to touch. The hardware may still work even if the screen does not.

Symptoms

• Screen shows a logo or loading animation that never progresses
• Touch inputs on the screen do nothing
• Screen is completely black but the charger lights are on
• Screen shows an error code that does not clear

How to Fix It

1. 1

   Try plugging in and starting via the app

   The screen and the charging hardware are separate systems. Many Ionity chargers will still deliver power even with a frozen display if you initiate the session through the Ionity app.

2. 2

   Unplug completely and wait 30 seconds

   Sometimes unplugging triggers a soft reset of the charger unit. Wait, then try again.

3. 3

   Try a different stall

   Ionity stations typically have multiple charger units. A frozen screen on one unit does not affect the others.

4. 4

   Report the charger in the Ionity app

   Open the Ionity app, find the station, and report the specific charger as out of order. This helps Ionity dispatch maintenance faster.

App shows station available but charger is faulted

The Ionity app shows green (available) status for a station, but when you arrive, the chargers display errors or are physically out of service.

Symptoms

• App shows 'Available' but charger displays 'Out of Order'
• All stalls at the station are faulted despite the app showing availability
• Charger has a maintenance sticker or barrier but the app has not been updated
• You drove to a station specifically because the app said it was free

How to Fix It

1. 1

   Refresh the station status in the app

   Pull down to refresh the station view. Status updates can lag by several minutes, especially after a charger was recently reported or rebooted.

2. 2

   Check individual charger status, not just the station

   Tap into the station details in the Ionity app. Even if some stalls show faulted, others at the same station may still work.

3. 3

   Try plugging in anyway

   Occasionally a charger shows a stale error on its screen from a previous session but works fine for the next user. Plug in and attempt to start via the app.

4. 4

   Plan a backup station

   Before driving to an Ionity station, check if there is an alternative station within 10 to 15 minutes. Ionity stations along highways sometimes have another Ionity or competitor station at the next exit.

5. 5

   Report the discrepancy

   Use the 'Report a problem' option in the Ionity app. Accurate reports help Ionity fix status sync issues and prioritize maintenance.

Unexpectedly high ad-hoc price

You charged without an Ionity subscription subscription and the per-kWh price is significantly higher than you expected. Ionity's ad-hoc rate is one of the most expensive in Europe.

Symptoms

• Invoice shows 0.75 EUR/kWh or higher
• Total cost for a short session is much higher than expected
• Price displayed on the charger screen was not noticed before starting
• You assumed the price would be similar to home charging or other networks

How to Fix It

1. 1

   Check if Ionity subscription would save you money

   Ionity offers subscription plans that reduce the per-kWh price significantly. Check the Ionity app for current plans and rates. If you charge at Ionity more than once or twice a month, a subscription usually pays for itself.

2. 2

   Check your vehicle manufacturer's charging plan

   Many EV manufacturers (Hyundai, Kia, BMW, Mercedes, Volkswagen Group, Ford) offer bundled Ionity pricing through their own apps. You may already have access to a discounted rate through your car brand.

3. 3

   Look at the charger screen before starting next time

   Ionity displays the per-kWh price on the charger screen before the session starts. The ad-hoc price is always shown.

4. 4

   Consider roaming providers for occasional use

   If you do not want a subscription, some roaming apps (like Shell Recharge, Chargemap, or Maingau) offer lower Ionity rates than the ad-hoc price.

Charging speed much lower than 350 kW

The station advertises 350 kW but your vehicle is charging at a fraction of that speed. This can be normal or it can indicate a problem.

Symptoms

• Dashboard shows 50 to 100 kW at a 350 kW charger
• Charging started fast but dropped sharply after a few minutes
• Other vehicles at the same station seem to charge faster
• Speed is lower than what you normally get at Ionity

How to Fix It

1. 1

   Check your battery level

   Charging speed drops significantly above 60 to 80% state of charge on most vehicles. This is normal battery behavior, not an Ionity issue. For the fastest stop, charge from 10 to 80% and move on.

2. 2

   Check the battery temperature

   Cold batteries charge slowly. If your vehicle supports battery preconditioning, set the Ionity station as your navigation destination. The car will warm the battery on the way there.

3. 3

   Verify your vehicle's max DC charging speed

   Not all EVs can accept 350 kW. Many popular models top out at 100 to 150 kW. The charger delivers only what the vehicle requests.

4. 4

   Try a different stall

   Individual charger units can occasionally have hardware limitations or faults that reduce output. Moving to another stall at the same station can sometimes restore full speed.

5. 5

   Check for power sharing

   Some Ionity stations share power between adjacent stalls. If the neighboring stall is also in use, both vehicles may receive reduced power. Try a stall that is not next to another active session.