Peugeot e-Expert Charging at Mer

Peugeot e-Expert Charger Will Not Start Charging

You plugged in the CCS2 cable but the charger just sits there doing nothing. Or you tapped your RFID card and the screen showed an error. When you have deliveries waiting, a charger that will not start is the last thing you need. Most start failures on the e-Expert come down to authentication, cable seating, or the charger itself.

Symptoms

• CCS2 connector plugged in but charger shows no active session
• Charger displays an error code after tapping RFID card or using the app
• Dashboard shows the charge port is connected but charging does not begin
• Cable does not lock into the CCS2 port on the e-Expert
• Charger starts authorization but times out without delivering power

What to Do

1. 1

   Remove and reseat the CCS2 connector

   Pull the connector out completely, wait 10 seconds, and push it back in firmly until you hear or feel a click. Make sure the charge port flap is fully open and the port is clean.

2. 2

   Check for a charging schedule

   On the e-Expert's touchscreen, go to charging settings. If a schedule is active, disable it or select the option to charge immediately.

3. 3

   Re-authenticate with the charger

   End any active session in the charging app, then start a new one. If using RFID, hold the card steady against the reader for a few seconds. Some chargers need authentication before you plug in.

4. 4

   Clean the charge port

   If the connector feels loose or does not click, check the charge port for dirt, ice, or debris. Wipe it out with a dry cloth. Commercial vans pick up more road grime than passenger cars.

5. 5

   Try a different stall or charger

   If the charger has multiple stalls, try another one. If none work at this location, move to the next charger on your route. Do not spend too much time on a single faulty charger.

6. 6

   Restart the vehicle systems

   Turn the e-Expert fully off, wait 30 seconds, then turn it back on. Unplug and replug the cable. This resets the charging communication between the van and the charger.

Peugeot e-Expert Charging Payment Failed at DC

You tapped your card, the charger showed a red X, and now you are stuck. Payment failures at public chargers are not about your e-Expert. They are about the charging network, your payment method, or your phone signal. Here is how to troubleshoot and get back on your delivery route.

Symptoms

• Charger displays a payment error or 'transaction declined' message
• Charging app shows 'session failed to start' after payment
• RFID card is not recognized by the charger reader
• Contactless bank card tap does not register on the charger
• Authorization process starts but times out before power is delivered

What to Do

1. 1

   Try a different payment method

   If RFID failed, try the app. If the app failed, try a contactless bank card. Having multiple options means one failure does not ruin your charging stop.

2. 2

   Check your mobile signal

   Look at your phone's signal bars. If signal is weak, the app cannot complete the transaction. Try stepping away from structures that block signal.

3. 3

   Verify payment details in the app

   Open the charging app and check your payment method. Make sure the card has not expired and there are no outstanding issues. Update if needed.

4. 4

   Check accepted networks on the charger

   Look for logos or stickers showing which charging networks and apps are accepted. If yours is not listed, you need a different app or card with roaming access.

5. 5

   Contact your fleet manager or card provider

   If using a company-provided RFID card, it may be deactivated or restricted to certain networks. Contact your fleet manager. Most RFID cards have a support number printed on them.

6. 6

   Move to a nearby alternative charger

   If payment will not work at this charger, check your app for the next closest option on your route. Do not lose too much time troubleshooting a single station.

Peugeot e-Expert Charging Slower Than Expected

You stopped for a mid-route charge and the screen shows 25 kW instead of the 100 kW maximum. The e-Expert's 75 kWh battery is larger than most vans on the Stellantis platform, which means longer charge times if something is limiting the speed. Slow charging is almost never a defect. It is usually the battery temperature, state of charge, or the charger itself.

Symptoms

• DC fast charging speed well below the 100 kW maximum
• AC depot charging stuck at 3-4 kW instead of the full 11 kW
• Charging speed drops sharply after reaching 50-60% on the dashboard
• Charging session starts at a reasonable speed but drops quickly within minutes
• Charger display shows lower power output than its rated capacity

What to Do

1. 1

   Check the battery temperature

   Look at the dashboard or the MyPeugeot app for battery temperature information. If the battery is cold, driving for 20-30 minutes before charging helps. The e-Expert does not precondition the battery, so plan your first charging stop after some time on the road.

2. 2

   Check your state of charge

   Look at the battery percentage on the dashboard. If you are above 80%, the slower speed is normal. For the fastest DC charging on your route, arrive between 10-20% and unplug at 80%.

3. 3

   Verify the charger is not sharing power

   Look at the charger unit. If there are two cables and another vehicle is using the other one, you may be sharing power. Move to an unoccupied charger if available.

4. 4

   Check the AC charge current setting

   On the e-Expert's touchscreen, go to the charging settings and make sure the AC charge current is set to maximum. A reduced setting will limit your depot or home charging speed.

5. 5

   Confirm your depot wallbox phase configuration

   Ask your facility manager or electrician to verify the wallbox is wired for 3-phase power. Single-phase limits you to about 3.7 kW, meaning over 20 hours for a full charge on the 75 kWh battery.

6. 6

   Try a different charger

   If the DC speed is still low, the charger may be degraded or faulty. Try a different stall at the same location or a different charging station on your route.

Station occupancy not updating in the app

The Mer app shows a station as available, but when you arrive, all connectors are occupied or out of service. The real-time status in the app can lag behind by several minutes.

Symptoms

• App shows "Available" but all connectors are in use when you arrive
• App shows a station as occupied but the chargers are visibly free
• Connector status flickers between available and occupied in the app
• Recently freed connectors still show as "In use" in the app for several minutes

How to Fix It

1. 1

   Pull to refresh the station detail in the Mer app

   On the station page, pull down to force a status refresh. The app does not always update automatically, and a manual refresh often shows the correct status.

2. 2

   Close and reopen the app

   Force-close the Mer app and reopen it. This clears any cached station data and pulls a fresh status from the server.

3. 3

   Check a third-party app for a second opinion

   Apps like Plugsurfing, A Better Route Planner, or Google Maps sometimes pull fresher data from Mer's backend. Use one of these to verify availability if the Mer app seems wrong.

4. 4

   Drive to the station if it is nearby

   If the station is less than five minutes away, it is often faster to just go and check. Occupancy can change in the time it takes to troubleshoot the app.

Third-party RFID card rejected

You are trying to authenticate with an RFID card from a roaming provider like Plugsurfing, NewMotion, or Virta, but the Mer charger rejects it. Not all third-party RFID cards are accepted at every Mer station.

Symptoms

• Charger screen shows "Card not recognized" after tapping
• The charger beeps once but nothing happens
• Your RFID card works at other networks but fails at Mer
• The charger prompts you to try again but repeated taps do not help

How to Fix It

1. 1

   Hold the card flat against the reader for three full seconds

   Do not tap and remove quickly. Some Mer readers need a longer hold to register the card. Keep it pressed flat against the RFID symbol.

2. 2

   Check if your roaming provider covers Mer stations

   Open your roaming provider's app and search for this specific Mer station. Some providers have roaming agreements with Mer but not for every station type or region.

3. 3

   Use the Mer app instead

   Download the Mer app if you do not have it. Create an account and add a payment method. You can start the session through the app even if your RFID card does not work.

4. 4

   Try contactless bank card payment

   Newer Mer stations have a contactless payment terminal. Look for a card reader with the contactless payment symbol. Tap your bank card or phone to start.

5. 5

   Try a Mer-issued RFID card for future visits

   You can order an RFID card directly from Mer through their app or website. Mer's own cards are accepted at all Mer stations without roaming issues.

Charger screen showing error but no error code

The charger screen displays a generic error message like "Error" or "Fault" without any specific code or explanation. This makes it hard to know if the problem is temporary or if the unit is broken.

Symptoms

• Charger screen shows "Error" or a red warning icon with no further detail
• The error appears before you even try to authenticate
• The error appears after plugging in but before power delivery starts
• Screen alternates between the normal start screen and the error message

How to Fix It

1. 1

   Unplug the connector and wait 30 seconds

   Some Mer chargers show transient errors after a previous session ended abnormally. Unplugging and waiting gives the charger time to reset its internal state.

2. 2

   Try the other connector on the same unit

   If the station has a second CCS2 connector, try that one. A hardware fault on one connector does not always affect the other.

3. 3

   Check if other cars are successfully charging at the station

   If nobody at the station is charging, the entire station may be down. If others are charging fine, the issue is limited to your connector.

4. 4

   Report the faulty unit in the Mer app

   Open the Mer app, find the station, and report the issue. Include which connector number has the error. This helps Mer send a technician and warns other drivers.

5. 5

   Move to a different station

   A charger with a persistent generic error is unlikely to start working on its own. Use the Mer app to find the nearest alternative station.

Cable locked and will not release in cold weather

You finished charging but the CCS2 cable will not unlock from your car. In Nordic winters, ice can form around the connector locking mechanism, making it physically difficult to release.

Symptoms

• Pressing the connector release button does not unlock the cable
• The connector feels frozen in place
• Your car shows "Charging complete" but the cable is stuck
• The locking pin on the connector is visibly iced over

How to Fix It

1. 1

   Make sure the charging session has fully ended

   The cable stays locked while a session is active. Stop the session in the Mer app or on the charger screen, then try releasing the connector again. Wait 10 seconds after the session ends.

2. 2

   Try unlocking from your car

   Most EVs have a cable release option in the infotainment system or a button near the charge port. Use your car's unlock function rather than the connector button.

3. 3

   Warm the connector gently

   If ice is the problem, pour lukewarm water (not boiling) over the connector and charge port area. You can also cup your hands around the connector to warm it with body heat. Do not use force or tools to pry it free.

4. 4

   Run the car's cabin heater for a few minutes

   Turning on the car's climate system can gradually warm the charge port area from the inside. This works slowly but can free a mildly frozen connector after 5-10 minutes.

5. 5

   Call Mer support if the cable is truly stuck

   If nothing works after 15 minutes, call the support number on the charger. Mer can remotely release the cable lock on their end. Do not pull with excessive force as this can damage both the connector and your car's charge port.

App requires location services for remote start

The Mer app asks you to enable location services before you can start a charging session, even when you are standing right next to the charger and selected it manually from the map.

Symptoms

• App shows "Enable location services to start charging" popup
• Start button is grayed out until location permission is granted
• The app worked fine before but now demands location after an update
• You can browse the map but cannot start a session without GPS enabled

How to Fix It

1. 1

   Enable location services temporarily

   Go to your phone's settings, find the Mer app, and set location access to "While Using the App." You can change it back after your session.

2. 2

   Make sure GPS has a fix

   In underground parking garages or areas with poor GPS reception, the app may not be able to confirm your location. Step outside or move closer to an open area until the app detects your position.

3. 3

   Use RFID or contactless payment instead

   If you do not want to share your location, use your RFID card or a contactless bank card to start the session. These methods do not require the app at all.

4. 4

   Scan the QR code on the charger

   Some Mer chargers have a QR code that opens the start process in a browser, bypassing the app's location requirement.

Former Grønn Kontakt station not found in Mer app

Mer acquired Grønn Kontakt in Norway, but some older stations may not appear correctly in the Mer app, especially during the transition period.

Symptoms

• Station visible on the street but not on the Mer app map
• Searching by the old Grønn Kontakt name returns no results
• QR code on the charger links to a Grønn Kontakt page that no longer works
• RFID card from Grønn Kontakt account rejected

How to Fix It

1. 1

   Update the Mer app to the latest version

   Older versions of the app may not include recently migrated Grønn Kontakt stations. Update from the App Store or Google Play.

2. 2

   Search by the station's physical address

   Instead of searching by station name, try the street address or zoom into the location on the app map. The station may appear under a new Mer name.

3. 3

   Enter the charger ID manually

   Look for a station or connector ID printed on the charger hardware. Enter this ID in the Mer app's manual start option.

4. 4

   Use contactless payment to bypass the app

   If the station has a payment terminal, tap your bank card to start. This works independently of whether the app has the station listed.