MG ZS EV Charging at Lidl Charging

MG ZS EV Charger Won't Start? Quick Fix Guide

You have connected the charger to your MG ZS EV but nothing happens. No power flowing, the charger is showing an error, or the car just does not respond. Before you give up and drive to another station, run through these checks. Most charging failures have a simple fix.

Symptoms

• Charger display shows error after plugging in the CCS2 connector
• Charge port light on the ZS EV does not illuminate
• Car dashboard shows no indication of charging activity
• Charger screen stays on the welcome or authentication screen
• Type 2 AC connector locks in but charging does not begin

What to Do

1. 1

   Check the charger display for errors or instructions

   Look at the charger screen. It will tell you if authentication is needed, if there is a fault, or if it is waiting for the vehicle. This is the fastest way to identify the problem.

2. 2

   Remove and reinsert the connector

   Pull the CCS2 or Type 2 connector out completely, wait 10-15 seconds, and push it back in firmly. Make sure it locks into the ZS EV's front charge port.

3. 3

   Authenticate with the charger

   Tap your RFID card, start the session in the network app, or use contactless payment. Try authenticating both before and after plugging in, as different chargers have different sequences.

4. 4

   Check the charge port for obstructions

   Inspect the ZS EV's charge port for debris, ice, or visible damage to the pins. In winter, gently remove any ice with your hand or a soft cloth. Do not use metal tools.

5. 5

   Turn the car off and back on

   Switch the ZS EV off completely, wait 30 seconds, then turn it on again. This resets the onboard charging system and can resolve communication glitches.

6. 6

   Try another stall or station

   If the charger is faulty, move to another stall. If the entire station is down, find a nearby alternative using your charging app.

MG ZS EV Charging Payment Failed? Solve It Fast

Your MG ZS EV is plugged in and ready to charge, but the payment is not going through. Whether it is an RFID card, an app, or a bank card, payment failures are among the most common reasons charging sessions fail to start. Here is how to get it sorted and get on with your charge.

Symptoms

• RFID card tap produces no response from the charger
• Network app shows a payment declined error
• Contactless card is rejected at the charger terminal
• Charger asks for authentication but nothing you try works
• Charging starts then stops within seconds due to billing error

What to Do

1. 1

   Check what payment methods the charger accepts

   Look at the charger for payment logos, QR codes, or instructions. Identify whether it takes RFID, app payments, contactless cards, or a specific network's card only.

2. 2

   Try the charger network's own app

   Scan the QR code on the charger or search for the network's app. Register, add a payment method, and try starting the session through the app.

3. 3

   Try alternative payment methods

   Switch between RFID card, contactless bank card, and app-based payment. If you have a roaming provider like Plugsurfing or Shell Recharge, try their card or app.

4. 4

   Check your bank for declined transactions

   Open your banking app to look for blocked pre-authorizations or declined charges. If the hold was blocked, you may need to approve it or use a different card.

5. 5

   Try a different stall

   The card reader on one stall may be faulty while others work fine. Move to the next stall and try again.

6. 6

   Find a nearby compatible charger

   If nothing works at this station, use your charging app to find an alternative. Filter by networks where your payment methods are confirmed to work.

MG ZS EV Charging Slowly? Causes and Solutions

Your MG ZS EV is taking much longer to charge than you expected. With a 94kW maximum DC speed and no battery preconditioning, the ZS EV is particularly affected by cold weather and charging conditions. Understanding these limits helps you plan better and avoid frustration at the charger.

Symptoms

• DC fast charging power well below 94kW
• AC charging not reaching the full 11kW
• Very slow charging in cold or winter conditions
• Charging speed drops significantly above 50-60% SOC
• First fast charge of the day is much slower than subsequent ones

What to Do

1. 1

   Verify the charger's maximum output

   Check the charger label or app for its power rating. If it is a 50kW unit, the ZS EV cannot charge faster. Look for chargers rated at 100kW or above to access the full 94kW capability.

2. 2

   Drive longer before charging in cold weather

   Since the ZS EV has no preconditioning, the best way to warm the battery is to drive. A longer highway drive before the charger will raise the battery temperature naturally, improving DC charging speed.

3. 3

   Charge at a lower SOC

   Arrive at the charger between 10-20% SOC for the fastest charging speeds. The ZS EV delivers its best power in the 10-50% range.

4. 4

   Choose a stall without power sharing

   If the station shares power between stalls, pick one where the adjacent stall is empty. This gives you the full power allocation.

5. 5

   Check your AC cable and charger

   For AC charging, verify you are using a 3-phase Type 2 cable on an 11kW charger. A single-phase connection limits you to about 3.6kW.

6. 6

   Accept the winter speed reality

   In cold weather, the ZS EV's lack of preconditioning and heat pump means slow starts are unavoidable. Plan for longer charging stops in winter and consider parking in a heated garage when possible.

Pricing confusion at the charger

Lidl charging policies vary by country and store. Some locations have promotional rates, while others charge standard per-kWh fees. The rules can change without much notice.

Symptoms

• Charging session costs more than expected
• Different Lidl stores seem to have different pricing
• Session stops after a time limit you did not expect
• App shows different terms than what you experienced last time

How to Fix It

1. 1

   Check the pricing terms at the specific store

   Pricing varies by location and country. Look at the signage near the charger or check the app before you start. Do not assume the same terms apply at all Lidl stores.

2. 2

   Set a timer on your phone

   If the location has a time limit, start a timer when you begin charging so you know when to return to your car.

3. 3

   Check if idle fees apply

   Some Lidl locations charge idle fees if your car remains plugged in after charging completes. Move your car promptly when the session ends.

4. 4

   Do not rely on supermarket chargers for a full charge

   Supermarket charging is best for a quick top-up while shopping. If you need to charge from low battery to 80%, plan for a dedicated fast charging station where you can stay longer without restrictions.

Charger occupied by ICE vehicles

Non-electric cars park in the EV charging spots because they are close to the store entrance. This is a persistent problem at supermarket locations.

Symptoms

• Petrol or diesel car parked in the marked EV charging bay
• Car parked so close to the charger that you cannot access the cable
• All EV spots taken by non-electric vehicles
• Shopping cart corral or delivery truck blocking access to the charger

How to Fix It

1. 1

   Check if the parking is enforced

   Some Lidl locations have clear EV-only signage with towing warnings. Others just have painted markings that are easy to ignore. If there is a parking management company sign, you can report the ICE vehicle.

2. 2

   Ask at the Lidl store

   Store staff may be willing to make an announcement. They deal with parking issues regularly and some stores have processes for this.

3. 3

   Wait or shop first

   Supermarket parking turns over quickly. A 20-minute shopping trip may be enough for the spot to clear.

4. 4

   Find the nearest alternative

   Check for another Lidl or a nearby public charger. In urban areas, there is often another option within a few minutes.

Charging power reduced during peak store hours

The charger delivers noticeably less power during busy shopping times. The station may share its electrical supply with the store itself, reducing available power for EV charging.

Symptoms

• Charging speed is significantly slower during Saturday morning or lunch rush
• Dashboard shows 30 to 50 kW at a charger rated for 150 kW
• Speed improves noticeably during quieter hours
• Two cars charging simultaneously both receive low power

How to Fix It

1. 1

   Check your battery level and temperature first

   Before blaming the charger, confirm your battery is not above 80% (where speed drops naturally) and not cold. These are the most common reasons for slow charging regardless of location.

2. 2

   Try charging during off-peak hours

   If your schedule allows, charge early morning or in the evening when the store is less busy. Power allocation to the charger may increase when store demand drops.

3. 3

   Check if another vehicle is sharing the power unit

   Some Lidl chargers share power between two connectors. If both are in use, each vehicle gets roughly half the rated power. If one car finishes, your speed may increase.

4. 4

   Accept the lower speed if you are shopping anyway

   Even at 50 kW, you gain about 50 km of range every 10 minutes. If you are shopping for 30 minutes, that is still a meaningful top-up.

App needed for troubleshooting but not normally required

Lidl chargers generally work with contactless payment or a charging card. But when something goes wrong, you may need the operator's app to diagnose the problem or start a session manually.

Symptoms

• Contactless payment failed and there is no other way to start
• Charger shows an error code you do not understand
• You want to check real-time status but the charger screen is unhelpful
• QR code on the charger leads to an app you do not have installed

How to Fix It

1. 1

   Scan the QR code on the charger

   This usually opens the operator's web interface or app store page. Lidl chargers are operated by different companies depending on the country (Compleo, Allego, E.ON, and others).

2. 2

   Note the operator name on the charger

   The charging operator is printed on the charger unit, usually near the base or on the payment terminal. Search for their app if you need to start a session or report a fault.

3. 3

   Try a roaming app

   Apps like Chargemap, Shell Recharge, or Plugsurfing often have roaming access to Lidl chargers. If the contactless reader is broken, starting through a roaming app may work.

4. 4

   Call the support number on the charger

   There is almost always a phone number on the charger unit for the operator's helpline. They can sometimes start or reset a session remotely.

Charger placement blocks adjacent parking spots

Some Lidl charger installations make it difficult to park in adjacent spots when a car is plugged in. The cable or the charger unit itself can obstruct neighboring bays.

Symptoms

• Your charging cable stretches across the next parking spot
• Parked car at the charger blocks you from entering the adjacent bay
• Cable does not reach your charge port without parking at an awkward angle
• Other shoppers complain about the cable crossing the walkway

How to Fix It

1. 1

   Park with your charge port closest to the charger

   Know which side of your car the charge port is on. If possible, pull in from the direction that puts the port nearest to the cable. This keeps the cable short and out of the way.

2. 2

   Route the cable over your car if needed

   If the cable must cross to the opposite side, drape it over the hood or roof rather than across the ground where people walk. Most DC cables are long enough for this.

3. 3

   Use the spot that causes the least obstruction

   If multiple charging spots are available, choose the one where your charge port alignment minimizes cable stretch across other bays.

4. 4

   Be mindful of the time limit

   Do not leave your car plugged in longer than necessary. In a tight parking lot, a plugged-in car blocking adjacent spots is more frustrating than one that is simply parked.