MG MG5 Charging at Vattenfall InCharge

MG MG5 Charger Won't Start? Step-by-Step Help

You have plugged in your MG MG5 and the charging session refuses to start. The charger might be blinking, showing an error, or doing nothing at all. This is a common problem across all EVs, and the MG5 is no exception. Most causes are easy to diagnose and fix on the spot.

Symptoms

• Charger display shows an error or stays on the start screen
• CCS2 connector plugs in but charging does not initiate
• MG5 charge port light does not turn on or stays amber
• App shows the charger as available but the session does not begin
• AC Type 2 cable locks in but no power flows

What to Do

1. 1

   Read the charger screen

   Check for error messages, authentication prompts, or status indicators. If it says 'waiting for vehicle' the problem is on the car side. If it says 'error' or 'out of service,' the charger is the issue.

2. 2

   Unplug, wait, and replug

   Remove the connector completely, wait 15 seconds, and reinsert it firmly. Listen for the locking click on the MG5's charge port. This resets the communication handshake.

3. 3

   Complete authentication

   Tap your RFID card, open the network app and start the session, or use contactless payment. Some chargers need you to authenticate before plugging in, others after.

4. 4

   Check for scheduled charging

   Go to the MG5's charging settings on the infotainment screen. If a charging schedule is active, disable it to allow immediate charging.

5. 5

   Restart the car's systems

   Turn the MG5 off using the start button, wait 30 seconds, then turn it back on. This can clear temporary software glitches that prevent the charge port from communicating.

6. 6

   Move to another stall or station

   If the charger is at fault, try another stall. If no stalls work, the station may have a site-wide issue. Find an alternative station using your charging app.

MG MG5 Charging Payment Failed? How to Fix It

You are standing at a charger with your MG MG5 and the payment will not work. Card declined, app throwing errors, or no idea how to pay at all. This is one of the most frustrating parts of public charging, and it happens to everyone. Here is how to get past it.

Symptoms

• RFID card not recognized when tapped on the charger
• Charging app shows payment error or transaction declined
• Contactless card payment rejected at the terminal
• Charger starts authentication but then returns an error
• Session begins but ends immediately due to payment failure

What to Do

1. 1

   Identify accepted payment methods

   Look at the charger for payment logos and instructions. Note whether it accepts RFID cards, specific apps, contactless cards, or QR code payments. Each charger may support different methods.

2. 2

   Try the network's own app

   Download the charger network's app, create an account, and add a payment method. Then start the session through the app. This bypasses RFID and contactless issues.

3. 3

   Switch to an alternative payment method

   If your primary RFID card fails, try contactless with your bank card. If that fails, try a roaming provider like Plugsurfing, Shell Recharge, or Chargemap.

4. 4

   Check your bank for blocked transactions

   Open your banking app and look for declined or pending transactions. If the pre-authorization was blocked, call your bank or temporarily increase your card limit.

5. 5

   Try a different stall

   If the card reader on one stall is broken, another stall at the same station may have a working reader. Try the next one before giving up on the location.

6. 6

   Find an alternative station

   Use your charging app to find a nearby station from a network where your payment methods are confirmed to work. Filter by your preferred payment method if the app supports it.

MG MG5 Charging Slowly? Why and How to Fix It

Your MG MG5 is charging slower than you expected. With a maximum DC speed of 87kW, the MG5 is not the fastest charger in its class, but it should still deliver reasonable speeds. If you are seeing numbers well below that, something else is going on. Here is what to check.

Symptoms

• DC charging power showing well below 87kW on the charger display
• AC charging stuck below 11kW on a capable wallbox
• Estimated charging time significantly longer than expected
• Charging speed drops sharply above 50-60% SOC
• Very slow charging in cold weather conditions

What to Do

1. 1

   Check the charger's maximum power output

   Verify the charger is rated above 87kW. If it is a 50kW charger, the MG5 is getting the maximum available. Look at the charger label or check in the network app.

2. 2

   Use preconditioning in cold weather

   Set the fast charger as your destination in the MG5's navigation system. This activates battery preconditioning, which warms the battery before you arrive and improves initial charging speed.

3. 3

   Check your state of charge

   If you are above 60% SOC, the MG5's charging taper is expected. For the fastest session, arrive at the charger between 10-20% SOC and charge to 70-80%.

4. 4

   Try a different stall to avoid power sharing

   If the station shares power between stalls, wait for other cars to finish or move to a stall that is not paired with another active charger. Some stations label which stalls share power.

5. 5

   For AC, verify your cable and charger

   Make sure you are using a 3-phase Type 2 cable on an 11kW or higher AC charger. A single-phase connection limits you to about 3.6kW, which adds many hours to a full charge.

6. 6

   Check car settings for charging limits

   In the MG5's settings, look for any AC current limit or maximum charge level that might be capping your speed.