MG MG5 Charging at Le Plein

MG MG5 Charger Won't Start? Step-by-Step Help

You have plugged in your MG MG5 and the charging session refuses to start. The charger might be blinking, showing an error, or doing nothing at all. This is a common problem across all EVs, and the MG5 is no exception. Most causes are easy to diagnose and fix on the spot.

Symptoms

• Charger display shows an error or stays on the start screen
• CCS2 connector plugs in but charging does not initiate
• MG5 charge port light does not turn on or stays amber
• App shows the charger as available but the session does not begin
• AC Type 2 cable locks in but no power flows

What to Do

1. 1

   Read the charger screen

   Check for error messages, authentication prompts, or status indicators. If it says 'waiting for vehicle' the problem is on the car side. If it says 'error' or 'out of service,' the charger is the issue.

2. 2

   Unplug, wait, and replug

   Remove the connector completely, wait 15 seconds, and reinsert it firmly. Listen for the locking click on the MG5's charge port. This resets the communication handshake.

3. 3

   Complete authentication

   Tap your RFID card, open the network app and start the session, or use contactless payment. Some chargers need you to authenticate before plugging in, others after.

4. 4

   Check for scheduled charging

   Go to the MG5's charging settings on the infotainment screen. If a charging schedule is active, disable it to allow immediate charging.

5. 5

   Restart the car's systems

   Turn the MG5 off using the start button, wait 30 seconds, then turn it back on. This can clear temporary software glitches that prevent the charge port from communicating.

6. 6

   Move to another stall or station

   If the charger is at fault, try another stall. If no stalls work, the station may have a site-wide issue. Find an alternative station using your charging app.

MG MG5 Charging Payment Failed? How to Fix It

You are standing at a charger with your MG MG5 and the payment will not work. Card declined, app throwing errors, or no idea how to pay at all. This is one of the most frustrating parts of public charging, and it happens to everyone. Here is how to get past it.

Symptoms

• RFID card not recognized when tapped on the charger
• Charging app shows payment error or transaction declined
• Contactless card payment rejected at the terminal
• Charger starts authentication but then returns an error
• Session begins but ends immediately due to payment failure

What to Do

1. 1

   Identify accepted payment methods

   Look at the charger for payment logos and instructions. Note whether it accepts RFID cards, specific apps, contactless cards, or QR code payments. Each charger may support different methods.

2. 2

   Try the network's own app

   Download the charger network's app, create an account, and add a payment method. Then start the session through the app. This bypasses RFID and contactless issues.

3. 3

   Switch to an alternative payment method

   If your primary RFID card fails, try contactless with your bank card. If that fails, try a roaming provider like Plugsurfing, Shell Recharge, or Chargemap.

4. 4

   Check your bank for blocked transactions

   Open your banking app and look for declined or pending transactions. If the pre-authorization was blocked, call your bank or temporarily increase your card limit.

5. 5

   Try a different stall

   If the card reader on one stall is broken, another stall at the same station may have a working reader. Try the next one before giving up on the location.

6. 6

   Find an alternative station

   Use your charging app to find a nearby station from a network where your payment methods are confirmed to work. Filter by your preferred payment method if the app supports it.

MG MG5 Charging Slowly? Why and How to Fix It

Your MG MG5 is charging slower than you expected. With a maximum DC speed of 87kW, the MG5 is not the fastest charger in its class, but it should still deliver reasonable speeds. If you are seeing numbers well below that, something else is going on. Here is what to check.

Symptoms

• DC charging power showing well below 87kW on the charger display
• AC charging stuck below 11kW on a capable wallbox
• Estimated charging time significantly longer than expected
• Charging speed drops sharply above 50-60% SOC
• Very slow charging in cold weather conditions

What to Do

1. 1

   Check the charger's maximum power output

   Verify the charger is rated above 87kW. If it is a 50kW charger, the MG5 is getting the maximum available. Look at the charger label or check in the network app.

2. 2

   Use preconditioning in cold weather

   Set the fast charger as your destination in the MG5's navigation system. This activates battery preconditioning, which warms the battery before you arrive and improves initial charging speed.

3. 3

   Check your state of charge

   If you are above 60% SOC, the MG5's charging taper is expected. For the fastest session, arrive at the charger between 10-20% SOC and charge to 70-80%.

4. 4

   Try a different stall to avoid power sharing

   If the station shares power between stalls, wait for other cars to finish or move to a stall that is not paired with another active charger. Some stations label which stalls share power.

5. 5

   For AC, verify your cable and charger

   Make sure you are using a 3-phase Type 2 cable on an 11kW or higher AC charger. A single-phase connection limits you to about 3.6kW, which adds many hours to a full charge.

6. 6

   Check car settings for charging limits

   In the MG5's settings, look for any AC current limit or maximum charge level that might be capping your speed.

App and charger interface only in French

The Le Plein app and the charger screen interface are primarily in French. If you do not read French, navigating menus and understanding error messages takes extra effort.

Symptoms

• The app menus, buttons, and instructions are entirely in French
• The charger screen shows an error message you cannot read
• You cannot find the 'start session' button because the labels are in French
• Support articles and FAQ in the app are in French only

How to Fix It

1. 1

   Learn the key French charging terms

   A few words go a long way. 'Démarrer' means start, 'Arrêter' means stop, 'Brancher' means plug in, 'En charge' means charging, 'Disponible' means available, 'Hors service' means out of order. With these, you can navigate most screens.

2. 2

   Use your phone's translation feature on the charger screen

   Most smartphones can translate text from a photo. Point your camera at the charger screen and use Google Translate, Apple Translate, or a similar app to read the message. This works well for error messages you do not recognize.

3. 3

   Set up the session flow before you arrive

   Open the Le Plein app at home and familiarize yourself with the session flow: find station, select charger, start session. Once you know where the buttons are, the French labels matter less.

4. 4

   Use your phone's built-in app translation if available

   On Android, you can translate app interfaces using the system translation feature. On iOS, you can take a screenshot and translate it. This helps with menus and settings you need to navigate once.

RFID card ordering process through the app

Le Plein RFID cards can only be ordered through the app. There is no option to buy one at a station or from a retail location. The ordering and activation process has a few steps that can trip people up.

Symptoms

• You want an RFID card but cannot find where to order it
• You ordered a card but it has not arrived after the expected delivery time
• Your RFID card arrived but does not work at the charger
• The app says your card is active but the charger does not recognize it

How to Fix It

1. 1

   Order the card through the Le Plein app account section

   Open the Le Plein app, go to your account or profile settings, and look for an RFID card or badge option. Follow the ordering flow, which will ask for your delivery address. Delivery takes several business days within France.

2. 2

   Activate the card in the app after it arrives

   When the card arrives, you may need to activate it in the Le Plein app by entering the card number or scanning it. Check the instructions that came with the card. An unactivated card will not start a session.

3. 3

   Make sure your payment method is valid

   The RFID card charges sessions to the payment method saved in your Le Plein account. If your saved card has expired or been declined, the RFID card will not work even though it is activated. Update your payment details in the app.

4. 4

   Use the app to start sessions while waiting for the RFID card

   You do not need the physical RFID card to charge. The Le Plein app can start sessions directly. Use the app until your card arrives and is activated.

Station coverage concentrated in certain French regions

Le Plein's network does not cover all of France equally. Some regions have good coverage while others have very few or no stations. This can be a problem on longer trips.

Symptoms

• The app shows no Le Plein stations along a section of your route
• Stations are clustered around certain cities but absent in rural areas between them
• You planned a trip assuming Le Plein coverage and found a gap
• The nearest Le Plein station is far from your destination

How to Fix It

1. 1

   Check Le Plein coverage along your entire route before departing

   Open the Le Plein app and trace your route on the map. Look for gaps where there are no stations for long stretches. Identify these gaps before you leave, not when your battery is low.

2. 2

   Install backup charging apps for other French networks

   France has several other charging networks, including Ionity, TotalEnergies, Fastned, and local operators. Having apps for two or three networks ensures you always have a fallback when Le Plein coverage runs out.

3. 3

   Use a roaming RFID card for multi-network access

   A roaming card from Chargemap or another aggregator can access chargers from multiple French networks. This is especially useful in areas where Le Plein has no presence.

4. 4

   Plan with a multi-network route planner

   A Better Routeplanner (ABRP) or Chargemap show stations from all networks. Enter your vehicle and destination to get charging stops that work regardless of the operator.

Charger screen errors you cannot decipher

When something goes wrong at a Le Plein charger, the error message on the screen is in French. If you do not understand the message, you cannot tell whether to retry or move on.

Symptoms

• The screen shows an error code or message in French after you plug in
• The charger stopped mid-session and the screen displays a French message
• You see 'Hors service' or 'Erreur' but do not know the specific problem
• The screen shows instructions you cannot follow

How to Fix It

1. 1

   Photo-translate the error message

   Take a photo of the screen and use Google Translate's camera feature or Apple Translate to read it. This gives you the specific error, not just a guess.

2. 2

   Know the most common French charger errors

   'Hors service' means out of order, do not wait. 'Erreur de communication' means a communication error between charger and vehicle, try replugging. 'Session en cours' means a session is already active, possibly from a previous user who did not end it. 'Veuillez patienter' means please wait.

3. 3

   Try unplugging and reconnecting

   Many charger errors clear themselves when you unplug, wait 30 seconds, and plug in again. This resets the communication between your vehicle and the charger.

4. 4

   End any stuck session in the Le Plein app

   If the charger thinks a session is still active from a previous user, you may not be able to start a new one. Check the app to see if there is an active session on that charger. Sometimes you need to wait for it to time out.

5. 5

   Move to another charger if the error persists

   If the same error appears after two or three attempts, the charger likely has a hardware or software issue. Try another charger at the same station, or drive to the next Le Plein or alternative station.

Support phone line in French only

Le Plein's support phone line is staffed by French-speaking agents. If you need help at a station and do not speak French, communication can be difficult.

Symptoms

• You called support and the agent speaks only French
• The automated phone menu is in French with no language option
• You cannot explain your problem over the phone
• You need urgent help at a station but cannot communicate effectively

How to Fix It

1. 1

   Try the app's support or help section first

   Written support through the app (email, contact form, or chat) gives you time to use a translation tool. Type your question in English, translate it to French, and paste it. This is often more effective than a phone call.

2. 2

   Prepare a few key phrases in advance

   If you may need to call, have these ready: 'La borne ne fonctionne pas' (the charger is not working), 'Le câble est bloqué' (the cable is stuck), 'J'ai besoin d'aide' (I need help), and the station number or location name.

3. 3

   Use a real-time translation app during the call

   Google Translate's conversation mode can translate speech in both directions. It is not perfect, but it helps bridge the gap. Open it before you call.

4. 4

   Ask a nearby person for help if available

   If you are at a station and someone nearby speaks both French and your language, asking for a quick translation assist is perfectly reasonable. Most people are happy to help.