MG MG5 Charging at EVBox

MG MG5 Charger Won't Start? Step-by-Step Help

You have plugged in your MG MG5 and the charging session refuses to start. The charger might be blinking, showing an error, or doing nothing at all. This is a common problem across all EVs, and the MG5 is no exception. Most causes are easy to diagnose and fix on the spot.

Symptoms

• Charger display shows an error or stays on the start screen
• CCS2 connector plugs in but charging does not initiate
• MG5 charge port light does not turn on or stays amber
• App shows the charger as available but the session does not begin
• AC Type 2 cable locks in but no power flows

What to Do

1. 1

   Read the charger screen

   Check for error messages, authentication prompts, or status indicators. If it says 'waiting for vehicle' the problem is on the car side. If it says 'error' or 'out of service,' the charger is the issue.

2. 2

   Unplug, wait, and replug

   Remove the connector completely, wait 15 seconds, and reinsert it firmly. Listen for the locking click on the MG5's charge port. This resets the communication handshake.

3. 3

   Complete authentication

   Tap your RFID card, open the network app and start the session, or use contactless payment. Some chargers need you to authenticate before plugging in, others after.

4. 4

   Check for scheduled charging

   Go to the MG5's charging settings on the infotainment screen. If a charging schedule is active, disable it to allow immediate charging.

5. 5

   Restart the car's systems

   Turn the MG5 off using the start button, wait 30 seconds, then turn it back on. This can clear temporary software glitches that prevent the charge port from communicating.

6. 6

   Move to another stall or station

   If the charger is at fault, try another stall. If no stalls work, the station may have a site-wide issue. Find an alternative station using your charging app.

MG MG5 Charging Payment Failed? How to Fix It

You are standing at a charger with your MG MG5 and the payment will not work. Card declined, app throwing errors, or no idea how to pay at all. This is one of the most frustrating parts of public charging, and it happens to everyone. Here is how to get past it.

Symptoms

• RFID card not recognized when tapped on the charger
• Charging app shows payment error or transaction declined
• Contactless card payment rejected at the terminal
• Charger starts authentication but then returns an error
• Session begins but ends immediately due to payment failure

What to Do

1. 1

   Identify accepted payment methods

   Look at the charger for payment logos and instructions. Note whether it accepts RFID cards, specific apps, contactless cards, or QR code payments. Each charger may support different methods.

2. 2

   Try the network's own app

   Download the charger network's app, create an account, and add a payment method. Then start the session through the app. This bypasses RFID and contactless issues.

3. 3

   Switch to an alternative payment method

   If your primary RFID card fails, try contactless with your bank card. If that fails, try a roaming provider like Plugsurfing, Shell Recharge, or Chargemap.

4. 4

   Check your bank for blocked transactions

   Open your banking app and look for declined or pending transactions. If the pre-authorization was blocked, call your bank or temporarily increase your card limit.

5. 5

   Try a different stall

   If the card reader on one stall is broken, another stall at the same station may have a working reader. Try the next one before giving up on the location.

6. 6

   Find an alternative station

   Use your charging app to find a nearby station from a network where your payment methods are confirmed to work. Filter by your preferred payment method if the app supports it.

MG MG5 Charging Slowly? Why and How to Fix It

Your MG MG5 is charging slower than you expected. With a maximum DC speed of 87kW, the MG5 is not the fastest charger in its class, but it should still deliver reasonable speeds. If you are seeing numbers well below that, something else is going on. Here is what to check.

Symptoms

• DC charging power showing well below 87kW on the charger display
• AC charging stuck below 11kW on a capable wallbox
• Estimated charging time significantly longer than expected
• Charging speed drops sharply above 50-60% SOC
• Very slow charging in cold weather conditions

What to Do

1. 1

   Check the charger's maximum power output

   Verify the charger is rated above 87kW. If it is a 50kW charger, the MG5 is getting the maximum available. Look at the charger label or check in the network app.

2. 2

   Use preconditioning in cold weather

   Set the fast charger as your destination in the MG5's navigation system. This activates battery preconditioning, which warms the battery before you arrive and improves initial charging speed.

3. 3

   Check your state of charge

   If you are above 60% SOC, the MG5's charging taper is expected. For the fastest session, arrive at the charger between 10-20% SOC and charge to 70-80%.

4. 4

   Try a different stall to avoid power sharing

   If the station shares power between stalls, wait for other cars to finish or move to a stall that is not paired with another active charger. Some stations label which stalls share power.

5. 5

   For AC, verify your cable and charger

   Make sure you are using a 3-phase Type 2 cable on an 11kW or higher AC charger. A single-phase connection limits you to about 3.6kW, which adds many hours to a full charge.

6. 6

   Check car settings for charging limits

   In the MG5's settings, look for any AC current limit or maximum charge level that might be capping your speed.

EVBox app vs third-party operator confusion

You see an EVBox-branded charger and download the EVBox app, but the session will not start because the station is operated by a different company. Many EVBox chargers are hardware only, with a separate operator managing access and billing.

Symptoms

• EVBox app does not show the station or cannot start a session
• You created an EVBox account but the charger asks for a different app or RFID card
• Charger has EVBox branding but the screen shows a different company name
• QR code on the charger leads to a different operator's website or app

How to Fix It

1. 1

   Check the operator name on the charger screen or signage

   Look at the charger display when it is idle. The operator name is usually shown on the welcome screen. Common operators using EVBox hardware include municipalities, parking companies, and energy providers.

2. 2

   Scan the QR code on the charger

   The QR code leads to the operator's platform, not necessarily EVBox. Scan it to find out which app or website you need.

3. 3

   Try a roaming RFID card

   If you have an RFID card from Shell Recharge, Chargemap, Plugsurfing, or another roaming provider, try tapping it. Many EVBox chargers accept roaming cards regardless of who operates them.

4. 4

   Search for the station in a multi-network app

   Apps like Chargemap or Shell Recharge aggregate many operators. Search for the charger location and you should see which operator runs it and how to start a session.

5. 5

   Download the correct operator's app

   Once you know who operates the station, download their app. The EVBox app only works for chargers that EVBox operates directly.

CHAdeMO connector availability varies

Some EVBox fast chargers have both CCS2 and CHAdeMO connectors, but the CHAdeMO connector may be out of service, removed, or restricted. CHAdeMO is being phased out in Europe and availability is declining.

Symptoms

• CHAdeMO connector is physically present but does not work
• Charger screen shows CHAdeMO as 'Unavailable' or 'Out of Order'
• CHAdeMO connector has been removed and the port is capped
• App shows CHAdeMO available but the physical connector is missing

How to Fix It

1. 1

   Check the charger before relying on CHAdeMO

   If your vehicle uses CHAdeMO, visually confirm the connector is present and functional at the station before planning your stop. App data may not reflect recent hardware changes.

2. 2

   Try the CHAdeMO connector even if the app status is unclear

   Plug in and attempt to start a session. Sometimes the app shows a stale status but the connector works fine.

3. 3

   Have a CCS2 adapter as a long-term solution

   If your vehicle only has CHAdeMO (common in older Nissan Leafs and some Mitsubishi models), CHAdeMO infrastructure is shrinking across Europe. A CHAdeMO-to-CCS2 adapter may be worth investigating for your specific vehicle.

4. 4

   Filter for CHAdeMO in your charging app

   When planning a route, filter specifically for stations with verified CHAdeMO connectors. User reviews and recent check-ins are more reliable than operator listings for CHAdeMO availability.

RFID card registration process unclear

To use an RFID card at EVBox-operated stations, you may need to register the card through the EVBox platform first. The registration process is not always obvious.

Symptoms

• New RFID card does not work at the charger even after ordering it from EVBox
• Card works at other networks but not at EVBox-operated stations
• You received a card but there are no activation instructions
• Online portal asks for a card number format you do not recognize

How to Fix It

1. 1

   Check the activation email

   When you order an RFID card from EVBox, they send an activation email. Check your inbox and spam folder. The email contains a link to activate the card in your EVBox account.

2. 2

   Add the card in the EVBox app or portal

   Log in to your EVBox account (app or web portal). Navigate to 'My cards' or 'Charge cards' and add the card using the number printed on it. The card does not work until it is linked to your account.

3. 3

   Wait for activation to propagate

   After registering the card, it may take up to 24 hours for the activation to reach all chargers. If the card does not work immediately after registration, try again the next day.

4. 4

   Use the app as a backup while the card activates

   You can start sessions through the EVBox app while waiting for your RFID card to activate. Tap 'Start charging' in the app and select the charger.

Charger offline due to firmware update

EVBox periodically pushes firmware updates to their chargers. During an update, the charger is temporarily unavailable. This can happen without warning and usually lasts 10 to 30 minutes.

Symptoms

• Charger screen shows 'Updating' or 'Maintenance' message
• Charger was working a few minutes ago but now shows as offline
• App shows the charger as unavailable with no estimated return time
• Multiple chargers at the same location are all offline simultaneously

How to Fix It

1. 1

   Wait 10 to 15 minutes

   Firmware updates on EVBox chargers usually complete within 10 to 30 minutes. If the charger shows an update message, it will likely come back online shortly.

2. 2

   Try another charger at the same location

   Firmware updates sometimes roll out one unit at a time. If there are multiple chargers, others may still be operational.

3. 3

   Check the app for status updates

   The operator's app or the EVBox app may show whether the outage is a scheduled update or an unexpected fault. Scheduled updates usually have an estimated completion time.

4. 4

   Move to an alternative station if you cannot wait

   If you need to charge immediately and the update is taking longer than expected, use a multi-network app to find the nearest available charger from any network.

Power sharing between connectors reduces speed

Some EVBox fast chargers share their power output between two connectors. When both are in use, each vehicle receives roughly half the charger's maximum power.

Symptoms

• Charging speed drops by half when a second car plugs into the same unit
• Dashboard shows 75 kW at a charger rated for 150 kW
• Speed suddenly increases when the car on the other connector finishes
• One side of the charger consistently delivers more power than the other

How to Fix It

1. 1

   Check if both connectors are on the same unit

   EVBox dual-connector chargers share one power module. If both CCS2 cables come from the same physical cabinet, they share power. Two separate cabinets are two independent chargers.

2. 2

   Choose an unoccupied charger unit if available

   If multiple charger units are available, pick one where the other connector is not in use. You will get the full rated power to yourself.

3. 3

   Understand how power sharing works

   Power sharing is dynamic. The charger allocates power based on what each vehicle can accept. If the other vehicle is at 80% and barely drawing power, you may get most of the charger's output even while sharing.

4. 4

   Wait for the other car to finish

   If your speed is reduced by sharing, it will increase when the other vehicle finishes. Check your dashboard periodically. The speed change happens automatically without any action from you.

5. 5

   Check your vehicle's own limits first

   Before assuming power sharing is the issue, verify that your car is not limiting the speed due to battery temperature, state of charge above 80%, or its own maximum DC charging rate.