MG MG5 Charging at Badenova

MG MG5 Charger Won't Start? Step-by-Step Help

You have plugged in your MG MG5 and the charging session refuses to start. The charger might be blinking, showing an error, or doing nothing at all. This is a common problem across all EVs, and the MG5 is no exception. Most causes are easy to diagnose and fix on the spot.

Symptoms

• Charger display shows an error or stays on the start screen
• CCS2 connector plugs in but charging does not initiate
• MG5 charge port light does not turn on or stays amber
• App shows the charger as available but the session does not begin
• AC Type 2 cable locks in but no power flows

What to Do

1. 1

   Read the charger screen

   Check for error messages, authentication prompts, or status indicators. If it says 'waiting for vehicle' the problem is on the car side. If it says 'error' or 'out of service,' the charger is the issue.

2. 2

   Unplug, wait, and replug

   Remove the connector completely, wait 15 seconds, and reinsert it firmly. Listen for the locking click on the MG5's charge port. This resets the communication handshake.

3. 3

   Complete authentication

   Tap your RFID card, open the network app and start the session, or use contactless payment. Some chargers need you to authenticate before plugging in, others after.

4. 4

   Check for scheduled charging

   Go to the MG5's charging settings on the infotainment screen. If a charging schedule is active, disable it to allow immediate charging.

5. 5

   Restart the car's systems

   Turn the MG5 off using the start button, wait 30 seconds, then turn it back on. This can clear temporary software glitches that prevent the charge port from communicating.

6. 6

   Move to another stall or station

   If the charger is at fault, try another stall. If no stalls work, the station may have a site-wide issue. Find an alternative station using your charging app.

MG MG5 Charging Payment Failed? How to Fix It

You are standing at a charger with your MG MG5 and the payment will not work. Card declined, app throwing errors, or no idea how to pay at all. This is one of the most frustrating parts of public charging, and it happens to everyone. Here is how to get past it.

Symptoms

• RFID card not recognized when tapped on the charger
• Charging app shows payment error or transaction declined
• Contactless card payment rejected at the terminal
• Charger starts authentication but then returns an error
• Session begins but ends immediately due to payment failure

What to Do

1. 1

   Identify accepted payment methods

   Look at the charger for payment logos and instructions. Note whether it accepts RFID cards, specific apps, contactless cards, or QR code payments. Each charger may support different methods.

2. 2

   Try the network's own app

   Download the charger network's app, create an account, and add a payment method. Then start the session through the app. This bypasses RFID and contactless issues.

3. 3

   Switch to an alternative payment method

   If your primary RFID card fails, try contactless with your bank card. If that fails, try a roaming provider like Plugsurfing, Shell Recharge, or Chargemap.

4. 4

   Check your bank for blocked transactions

   Open your banking app and look for declined or pending transactions. If the pre-authorization was blocked, call your bank or temporarily increase your card limit.

5. 5

   Try a different stall

   If the card reader on one stall is broken, another stall at the same station may have a working reader. Try the next one before giving up on the location.

6. 6

   Find an alternative station

   Use your charging app to find a nearby station from a network where your payment methods are confirmed to work. Filter by your preferred payment method if the app supports it.

MG MG5 Charging Slowly? Why and How to Fix It

Your MG MG5 is charging slower than you expected. With a maximum DC speed of 87kW, the MG5 is not the fastest charger in its class, but it should still deliver reasonable speeds. If you are seeing numbers well below that, something else is going on. Here is what to check.

Symptoms

• DC charging power showing well below 87kW on the charger display
• AC charging stuck below 11kW on a capable wallbox
• Estimated charging time significantly longer than expected
• Charging speed drops sharply above 50-60% SOC
• Very slow charging in cold weather conditions

What to Do

1. 1

   Check the charger's maximum power output

   Verify the charger is rated above 87kW. If it is a 50kW charger, the MG5 is getting the maximum available. Look at the charger label or check in the network app.

2. 2

   Use preconditioning in cold weather

   Set the fast charger as your destination in the MG5's navigation system. This activates battery preconditioning, which warms the battery before you arrive and improves initial charging speed.

3. 3

   Check your state of charge

   If you are above 60% SOC, the MG5's charging taper is expected. For the fastest session, arrive at the charger between 10-20% SOC and charge to 70-80%.

4. 4

   Try a different stall to avoid power sharing

   If the station shares power between stalls, wait for other cars to finish or move to a stall that is not paired with another active charger. Some stations label which stalls share power.

5. 5

   For AC, verify your cable and charger

   Make sure you are using a 3-phase Type 2 cable on an 11kW or higher AC charger. A single-phase connection limits you to about 3.6kW, which adds many hours to a full charge.

6. 6

   Check car settings for charging limits

   In the MG5's settings, look for any AC current limit or maximum charge level that might be capping your speed.

App-only payment with no backup option at the charger

Badenova chargers require the Badenova app to start a session. There is no contactless card reader on the charger and no RFID option. If the app is not working, you cannot charge.

Symptoms

• The charger has no contactless payment terminal or RFID reader
• You do not have the Badenova app installed and cannot download it at the station
• The app will not load or crashes when trying to start a session
• You have no mobile data signal at the station and cannot use the app

How to Fix It

1. 1

   Install and set up the Badenova app before you need it

   Download the Badenova app and create an account with a valid payment method before your first visit. Trying to set up an account at the station, possibly with poor signal, is a frustrating experience you can avoid.

2. 2

   Try connecting to Wi-Fi if your mobile data is weak

   Some Badenova stations or nearby businesses may offer Wi-Fi. If your mobile data is too weak to load the app, look for available networks. Even a slow connection is enough to start a session.

3. 3

   Restart the app or your phone

   If the app crashes or freezes, close it completely and reopen it. If that does not help, restart your phone. App-only chargers depend entirely on your phone working, so basic troubleshooting matters.

4. 4

   Drive to an alternative charger with contactless payment

   If the app is genuinely broken or you have no signal, you need a charger that accepts contactless payment or RFID. Check another charging app (Ionity, EnBW mobility+, or a roaming app) for the nearest alternative station. This is the downside of app-only networks: no app, no charge.

5. 5

   Check if a roaming app supports Badenova stations

   Some roaming platforms (like EnBW mobility+ or Maingau) may include Badenova stations. If you already have a roaming app installed, search for the station there. You can sometimes start a session through a roaming app when the native app is not cooperating.

Regional coverage limited to southwestern Germany

Badenova's network is concentrated in the Baden-Württemberg region, especially around Freiburg, the Upper Rhine area, and surrounding towns. Outside this region, you will not find Badenova chargers.

Symptoms

• The Badenova app shows no stations outside the Freiburg/Baden region
• You assumed Badenova coverage would extend along the Autobahn but it does not
• The nearest Badenova station is 100 km or more from your destination
• You are driving through Germany and planned stops based on Badenova but ran into coverage gaps

How to Fix It

1. 1

   Check Badenova coverage before planning your route

   Open the Badenova app and look at the station map. You will see that coverage is regional, not national. If your trip extends beyond southwestern Germany, you need additional networks.

2. 2

   Install apps for national German networks

   For travel across Germany, install EnBW mobility+ (large national network), Ionity (Autobahn-focused), or Fastned. These networks have stations along major highways throughout the country.

3. 3

   Use a roaming app for multi-network access

   EnBW mobility+ and Maingau EinfachStromLaden work as roaming apps that access chargers from dozens of operators. One app covers you across Germany instead of installing a separate app for each regional operator.

4. 4

   Plan with a multi-network route planner for longer trips

   A Better Routeplanner (ABRP) shows chargers from all operators. Enter your vehicle model and destination to get optimized stops. Badenova stations will appear where they exist, and other networks fill the gaps.

App interface in German only

The Badenova app is designed for the German market and the interface is in German. If German is not your language, navigating the app takes extra effort.

Symptoms

• All app menus and buttons are in German
• Error messages from the charger (shown in the app) are in German
• You cannot find the 'start session' button because labels are in German
• Account setup and payment forms are in German

How to Fix It

1. 1

   Learn the key German charging terms

   'Laden starten' means start charging. 'Laden beenden' means stop charging. 'Verfügbar' means available. 'Besetzt' means occupied. 'Außer Betrieb' means out of order. 'Bezahlung' means payment. These cover most of what you need.

2. 2

   Set up your account at home with a translation tool open

   Create your Badenova account and add your payment method at home where you can take your time. Use Google Translate or a similar tool to translate the forms. You only need to do this once.

3. 3

   Use your phone's built-in app translation

   On Android, the system can translate app interfaces into your language. On iOS, you can screenshot any page and use the built-in translation feature. This helps with settings you do not visit often.

4. 4

   Memorize the session flow

   The flow is the same every time: open app, find station on map, select charger, tap start. Once you know the sequence, the German labels are less of a barrier. Practice at home before your first real session.

Stations at company premises with limited access hours

Some Badenova chargers are installed at business locations or company parking areas that have restricted access during evenings, weekends, or holidays.

Symptoms

• You arrived at a station and the parking area is gated or locked
• The charger is accessible during business hours but not when you need it
• The app shows the station as available but you physically cannot reach it
• Weekend or holiday access is restricted

How to Fix It

1. 1

   Check the station details in the app for access hours

   Some Badenova stations list opening hours or access restrictions in the station details. Before driving there, look for notes about access times, especially if you plan to charge in the evening, early morning, or on weekends.

2. 2

   Look for a gate code or intercom

   Some company premises with public chargers provide a gate code or intercom button for EV drivers. Check the station listing in the app or look for instructions near the gate entrance.

3. 3

   Drive to a publicly accessible alternative

   If the station is behind a locked gate, your only option is to find another charger. Check the Badenova app or a roaming app for the next nearest station that is on a public road or in a publicly accessible parking area.

4. 4

   Prefer stations at public locations when planning ahead

   For reliability, prioritize Badenova stations that are on public streets or at commercial locations (supermarkets, public parking garages). These are accessible 24/7 regardless of business hours.

Fewer fallback stations when a charger is broken

Badenova is a smaller regional network. If the charger you planned to use is out of order, the next Badenova station may be far away. Larger networks offer more alternatives within a short drive.

Symptoms

• You arrived and the charger shows 'Außer Betrieb' (out of order)
• The next Badenova station is 20 km or more away
• You do not have another charging app installed
• Your battery is low and you need to charge now

How to Fix It

1. 1

   Check for other Badenova stations nearby

   Open the Badenova app and look at the map for alternative stations in the area. Even in their core region, stations may be spaced 10 to 30 km apart.

2. 2

   Search for chargers from other operators

   Open a roaming app (EnBW mobility+, Maingau, or Chargemap) and search for any available fast charger nearby, regardless of operator. In Baden-Württemberg, EnBW has good coverage that often fills Badenova's gaps.

3. 3

   Look for AC chargers as a last resort

   If no DC fast charger is available, an AC charger at a hotel, parking garage, or public lot can add enough range to reach the next working fast charger. It is slower, but it keeps you moving.

4. 4

   Report the broken charger in the Badenova app

   Let Badenova know the charger is out of order. Smaller networks depend on user reports to dispatch maintenance. Your report helps the next driver.

5. 5

   Always have a backup network app installed

   With any smaller regional network, carry at least one additional charging app (like EnBW mobility+ or Ionity) as insurance. Setting this up takes five minutes and saves you from being stranded.