MG MG4 Charging at Iberdrola

MG MG4 Charger Won't Start? How to Fix It Now

You have plugged in your MG MG4 but nothing is happening. The charger light is blinking, the car is not responding, or you are getting an error message. This is frustrating, but most failed charging sessions have a simple fix. Let's walk through the common causes.

Symptoms

• Charger display shows an error code or red indicator
• CCS2 connector clicks in but charging does not begin
• Car dashboard shows no charging activity after plugging in
• Charger screen asks for authentication but does not accept your card or app
• Charging port light on the MG4 flashes or stays amber

What to Do

1. 1

   Check the charger screen for error messages

   Read any error codes or messages on the charger display. Common messages include 'authentication required,' 'connector error,' or 'out of service.' This tells you whether the problem is the charger or the car.

2. 2

   Unplug and replug the connector

   Remove the CCS2 or Type 2 connector completely, wait 10 seconds, and plug it back in firmly. Make sure you hear the click and the MG4's charge port light responds.

3. 3

   Authenticate again

   Re-tap your RFID card, restart the session in the app, or try contactless payment. Some chargers require you to authenticate before plugging in, others after. Try both sequences.

4. 4

   Disable scheduled charging

   On the MG4's infotainment screen, go to vehicle settings and check if scheduled charging is enabled. Turn it off temporarily to allow immediate charging.

5. 5

   Lock and unlock the car

   Use the MG4's key fob or the MG iSMART app to lock and then unlock the car. This can reset the charge port communication and clear temporary errors.

6. 6

   Try a different charger or stall

   If nothing works on this stall, try another one at the same station. If the entire station fails, the problem is likely the charger infrastructure, not your MG4.

MG MG4 Charging Payment Failed? Fix It Quickly

You are at a charger with your MG MG4 and the payment is not going through. Your card gets rejected, the app throws an error, or you cannot figure out how to pay at all. Payment issues are one of the most common reasons a charging session fails to start. Here is how to sort it out.

Symptoms

• RFID card tap does not register on the charger
• Charging app shows a payment error or insufficient funds
• Contactless bank card is declined at the charger terminal
• Charger asks for payment but you cannot find a method that works
• Session starts but stops immediately due to payment authorization failure

What to Do

1. 1

   Check which payment methods the charger accepts

   Look at the charger for logos showing accepted payment types: RFID, app, contactless card, QR code. Many chargers display the logos of compatible networks near the screen or card reader.

2. 2

   Try the network's app

   Scan the QR code on the charger or search for the network's app in your phone's app store. Many networks let you start a session through their app even without an RFID card.

3. 3

   Try a different payment method

   If your RFID card fails, try the app. If the app fails, try contactless. If you have a multi-network roaming card (like Plugsurfing or Shell Recharge), try that instead.

4. 4

   Check your card balance and bank notifications

   Open your banking app to check for declined transactions or pre-authorization holds. Contact your bank if the charger is trying to authorize a large hold that exceeds your available balance.

5. 5

   Use a roaming service

   If you do not have an account with this specific network, a roaming provider like Plugsurfing, Chargemap, or Shell Recharge may cover this charger. These services work across multiple networks with one card or app.

6. 6

   Find an alternative charger nearby

   If payment truly will not work, search for another charger nearby. Filter your charging app by your available payment methods to find a compatible station.

MG MG4 Charging Slowly? Causes and Quick Fixes

You plugged in your MG MG4 expecting fast charging, but the kW reading is disappointingly low. This is one of the most common frustrations for MG4 drivers, and it usually has a straightforward explanation. Here is what to check and how to get closer to the 142kW DC maximum your car supports.

Symptoms

• DC charging power showing well below 142kW on the charger display
• AC home or destination charging stuck below 11kW
• Estimated charging time much longer than expected
• Battery percentage climbing very slowly after 60-70% SOC
• Charging power drops significantly in cold weather

What to Do

1. 1

   Check the charger's rated power

   Look at the charger label or app to confirm its maximum output. If it is a 50kW unit, your MG4 cannot charge faster regardless of its 142kW capability.

2. 2

   Check your battery temperature and SOC

   On the MG4's instrument cluster, check your current state of charge. If you are above 70%, the taper is normal. In cold weather, use the preconditioning feature by setting the charger as your navigation destination.

3. 3

   Activate preconditioning via navigation

   Set the fast charger as your destination in the MG4's built-in navigation. This triggers battery preconditioning, warming the pack to an optimal temperature before you arrive.

4. 4

   Try a different CCS2 stall

   If the charger has multiple stalls, power may be shared between them. Try an adjacent stall or wait for other cars to finish. Some charging sites have dedicated high-power stalls.

5. 5

   Check your AC charging cable

   For AC charging, make sure you are using a cable rated for at least 11kW (3-phase, 16A). A single-phase cable limits you to about 3.6kW regardless of what the charger or car supports.

6. 6

   Verify no charging limit is set in the car

   In the MG4's settings, check if a charging current limit or maximum SOC limit has been set. A reduced AC charging current setting will cap your speed even on a capable charger.

App defaults to Spanish

The Iberdrola app opens in Spanish regardless of your phone's language setting. Finding the language switch can be confusing if you do not read Spanish.

Symptoms

• All app text is in Spanish after installation
• Language setting is not obvious in the menus
• Error messages and charger instructions appear only in Spanish
• Switching your phone's language does not change the app

How to Fix It

1. 1

   Open the app settings and look for 'Idioma'

   'Idioma' means 'Language' in Spanish. It is usually under the profile or settings menu (gear icon). Tap it and select English or your preferred language.

2. 2

   Check the profile or account section

   Some versions of the Iberdrola app place the language selector inside the user profile rather than in general settings. Look for your name or account icon at the top of the screen.

3. 3

   Update the app to the latest version

   Iberdrola has been improving multi-language support. Older versions may not have your language available. Update from the App Store or Google Play.

4. 4

   Use a roaming app as a backup

   If the language barrier is too frustrating, roaming apps like Chargemap, Shell Recharge, or Electropass work at many Iberdrola stations and offer broader language support.

Contactless payment session timeout

After tapping your card on an Iberdrola charger, there is a short window to plug in the cable and start charging. If you take too long, the session times out and you need to tap again.

Symptoms

• You tapped your card but by the time you connected the cable, nothing happened
• Charger screen shows 'Session expired' or returns to the start screen
• You were charged a pre-authorization but no energy was delivered
• The charger seemed ready but then went back to idle

How to Fix It

1. 1

   Plug in the cable first, then tap your card

   At Iberdrola stations, connect the cable to your vehicle before tapping your contactless card. This gives the charger the best chance to start immediately after authentication.

2. 2

   Tap your card again and act quickly

   After the tap, you typically have 60 to 90 seconds to complete the connection. If you missed the window, tap again. The pre-authorization from the first attempt will be released.

3. 3

   Use the Iberdrola app instead

   The app does not have the same time pressure. You can connect the cable, open the app, select the charger, and start at your own pace.

4. 4

   Check your bank statement for ghost charges

   Failed contactless attempts may show a pre-authorization hold. These are not actual charges and typically release within 3 to 7 business days. Contact your bank if they persist.

Confusing signage at gas station locations

Some Iberdrola chargers are located at gas stations (Repsol, Cepsa, or others). The EV charging area may not be clearly separated from the fuel pumps, and signage can be confusing.

Symptoms

• You cannot find the EV chargers at the gas station
• GPS directs you to the fuel pumps instead of the charging area
• Signage points to 'carga' or 'recarga' but the direction is unclear
• The charging spots are behind the gas station building or in an overflow lot

How to Fix It

1. 1

   Look for the charging area separate from the fuel pumps

   EV chargers at gas stations are almost always in a dedicated area away from the fuel pumps. Look for tall charger cabinets (about 2 meters high) rather than fuel dispensers.

2. 2

   Drive past the fuel pump area

   The charging area is often behind the main building, in a side lot, or at the far end of the property. Drive through the station slowly and look for the Iberdrola or charging network signage.

3. 3

   Ask the gas station attendant

   If the station has staff, ask where the electric charging points are. In Spanish, 'Donde estan los cargadores electricos?' gets the point across.

4. 4

   Check the Iberdrola app for station photos

   The station detail page in the Iberdrola app sometimes includes photos or access instructions that help you find the chargers within a larger gas station complex.

Mix of slow and fast chargers at the same station

Some Iberdrola stations have both AC chargers (7 to 22 kW) and DC fast chargers (50 to 350 kW) next to each other. It is easy to plug into a slow charger by mistake if you are not paying attention.

Symptoms

• You expected fast charging but your dashboard shows only 7 or 22 kW
• The charger you plugged into looks smaller than the others at the station
• You used a Type 2 cable instead of a CCS2 connector
• The charging session is going to take hours instead of minutes

How to Fix It

1. 1

   Check the charger label for power output

   Iberdrola chargers display their rated power (e.g., 50 kW, 150 kW, 350 kW) on the unit. Look for this label before plugging in. AC chargers (7 to 22 kW) are typically smaller and have Type 2 sockets.

2. 2

   Use the CCS2 connector for fast charging

   The CCS2 connector is the large combined plug for DC fast charging. If you used the smaller Type 2 plug (round with pins), you are on AC and will charge slowly.

3. 3

   Check the Iberdrola app for charger details

   The app shows each charger unit's power level at a station. Before plugging in, confirm which unit is the high-power DC charger.

4. 4

   Unplug and move to the fast charger

   If you accidentally started an AC session, stop the session in the app, unplug, and move to the DC fast charger. You will not be charged a penalty for a short session.

Power delivery varies by time of day

Some Iberdrola stations deliver noticeably less power during peak grid hours (typically early evening). This is due to grid constraints, not a charger fault.

Symptoms

• Charging speed is significantly lower in the evening than the same station delivered in the morning
• Speed starts high but drops during peak hours even at low battery levels
• Other vehicles at the station also show reduced speeds at the same time
• The charger does not reach its rated power despite your vehicle supporting it

How to Fix It

1. 1

   Check your battery level first

   The most common reason for reduced charging speed is a battery above 60 to 80% state of charge. Your vehicle limits the charging rate at higher battery levels regardless of the charger's capability.

2. 2

   Try charging during off-peak hours

   If your schedule allows, charge during late evening (after 10 PM) or early morning. Grid demand is lower and the station can deliver its full rated power.

3. 3

   Check for power sharing between chargers

   If multiple chargers are in use at the same station, they may share a grid connection. Charging when fewer vehicles are plugged in can improve your speed.

4. 4

   Try a different station nearby

   Not all Iberdrola stations have the same grid connection. A station a few kilometers away may have a better power supply and deliver higher speeds during peak hours.

5. 5

   Accept the reduced speed if you are above 60%

   If your battery is above 60%, the speed reduction is mostly from your vehicle's battery management, not the grid. This is normal and protects your battery's long-term health.