MG MG4 Charging at Enel X Way

MG MG4 Charger Won't Start? How to Fix It Now

You have plugged in your MG MG4 but nothing is happening. The charger light is blinking, the car is not responding, or you are getting an error message. This is frustrating, but most failed charging sessions have a simple fix. Let's walk through the common causes.

Symptoms

• Charger display shows an error code or red indicator
• CCS2 connector clicks in but charging does not begin
• Car dashboard shows no charging activity after plugging in
• Charger screen asks for authentication but does not accept your card or app
• Charging port light on the MG4 flashes or stays amber

What to Do

1. 1

   Check the charger screen for error messages

   Read any error codes or messages on the charger display. Common messages include 'authentication required,' 'connector error,' or 'out of service.' This tells you whether the problem is the charger or the car.

2. 2

   Unplug and replug the connector

   Remove the CCS2 or Type 2 connector completely, wait 10 seconds, and plug it back in firmly. Make sure you hear the click and the MG4's charge port light responds.

3. 3

   Authenticate again

   Re-tap your RFID card, restart the session in the app, or try contactless payment. Some chargers require you to authenticate before plugging in, others after. Try both sequences.

4. 4

   Disable scheduled charging

   On the MG4's infotainment screen, go to vehicle settings and check if scheduled charging is enabled. Turn it off temporarily to allow immediate charging.

5. 5

   Lock and unlock the car

   Use the MG4's key fob or the MG iSMART app to lock and then unlock the car. This can reset the charge port communication and clear temporary errors.

6. 6

   Try a different charger or stall

   If nothing works on this stall, try another one at the same station. If the entire station fails, the problem is likely the charger infrastructure, not your MG4.

MG MG4 Charging Payment Failed? Fix It Quickly

You are at a charger with your MG MG4 and the payment is not going through. Your card gets rejected, the app throws an error, or you cannot figure out how to pay at all. Payment issues are one of the most common reasons a charging session fails to start. Here is how to sort it out.

Symptoms

• RFID card tap does not register on the charger
• Charging app shows a payment error or insufficient funds
• Contactless bank card is declined at the charger terminal
• Charger asks for payment but you cannot find a method that works
• Session starts but stops immediately due to payment authorization failure

What to Do

1. 1

   Check which payment methods the charger accepts

   Look at the charger for logos showing accepted payment types: RFID, app, contactless card, QR code. Many chargers display the logos of compatible networks near the screen or card reader.

2. 2

   Try the network's app

   Scan the QR code on the charger or search for the network's app in your phone's app store. Many networks let you start a session through their app even without an RFID card.

3. 3

   Try a different payment method

   If your RFID card fails, try the app. If the app fails, try contactless. If you have a multi-network roaming card (like Plugsurfing or Shell Recharge), try that instead.

4. 4

   Check your card balance and bank notifications

   Open your banking app to check for declined transactions or pre-authorization holds. Contact your bank if the charger is trying to authorize a large hold that exceeds your available balance.

5. 5

   Use a roaming service

   If you do not have an account with this specific network, a roaming provider like Plugsurfing, Chargemap, or Shell Recharge may cover this charger. These services work across multiple networks with one card or app.

6. 6

   Find an alternative charger nearby

   If payment truly will not work, search for another charger nearby. Filter your charging app by your available payment methods to find a compatible station.

MG MG4 Charging Slowly? Causes and Quick Fixes

You plugged in your MG MG4 expecting fast charging, but the kW reading is disappointingly low. This is one of the most common frustrations for MG4 drivers, and it usually has a straightforward explanation. Here is what to check and how to get closer to the 142kW DC maximum your car supports.

Symptoms

• DC charging power showing well below 142kW on the charger display
• AC home or destination charging stuck below 11kW
• Estimated charging time much longer than expected
• Battery percentage climbing very slowly after 60-70% SOC
• Charging power drops significantly in cold weather

What to Do

1. 1

   Check the charger's rated power

   Look at the charger label or app to confirm its maximum output. If it is a 50kW unit, your MG4 cannot charge faster regardless of its 142kW capability.

2. 2

   Check your battery temperature and SOC

   On the MG4's instrument cluster, check your current state of charge. If you are above 70%, the taper is normal. In cold weather, use the preconditioning feature by setting the charger as your navigation destination.

3. 3

   Activate preconditioning via navigation

   Set the fast charger as your destination in the MG4's built-in navigation. This triggers battery preconditioning, warming the pack to an optimal temperature before you arrive.

4. 4

   Try a different CCS2 stall

   If the charger has multiple stalls, power may be shared between them. Try an adjacent stall or wait for other cars to finish. Some charging sites have dedicated high-power stalls.

5. 5

   Check your AC charging cable

   For AC charging, make sure you are using a cable rated for at least 11kW (3-phase, 16A). A single-phase cable limits you to about 3.6kW regardless of what the charger or car supports.

6. 6

   Verify no charging limit is set in the car

   In the MG4's settings, check if a charging current limit or maximum SOC limit has been set. A reduced AC charging current setting will cap your speed even on a capable charger.

Old Enel X account not working after rebrand to Enel X Way

Enel rebranded its charging network from Enel X to Enel X Way. If you had an Enel X account, it may not work in the new Enel X Way app without migration.

Symptoms

• Login credentials from the old Enel X app are rejected in Enel X Way
• The old Enel X app still works but shows outdated station information
• You have the Enel X Way app but your payment methods and history did not transfer
• Password reset emails reference 'Enel X' instead of 'Enel X Way'

How to Fix It

1. 1

   Download the Enel X Way app (not the old Enel X app)

   The old Enel X app is being phased out. Search for 'Enel X Way' specifically in the App Store or Google Play. The icon and name are different from the legacy app.

2. 2

   Try logging in with your existing Enel X credentials

   Some accounts were automatically migrated. Try your old email and password in the Enel X Way app first. If it works, your history and payment methods should transfer.

3. 3

   Reset your password if login fails

   Use the 'Forgot password' option in the Enel X Way app. The migration may have reset your credentials. Enter the same email you used for Enel X.

4. 4

   Create a new Enel X Way account if migration fails

   If your old account cannot be recovered, create a new account in the Enel X Way app. You will lose your charging history but can start fresh with a working account.

5. 5

   Contact support for billing continuity

   If you had a subscription or prepaid balance on Enel X, contact Enel X Way support to have it transferred. Do not assume it carried over automatically.

Contactless payment terminal hard to reach

At some Enel X Way stations, the contactless payment terminal is positioned awkwardly, too high, at a strange angle, or behind a panel that is not obvious. This makes tapping your card difficult.

Symptoms

• You cannot find the contactless reader on the charger
• The reader is positioned above head height or behind a flap
• Your card tap does not register because the angle is wrong
• The contactless symbol is visible but the reader does not seem to respond

How to Fix It

1. 1

   Look for the contactless symbol on all sides of the charger

   Enel X Way chargers place the payment terminal in different positions depending on the hardware model. Check the front, sides, and any panels or flaps on the charger cabinet.

2. 2

   Hold your card flat against the reader for 3 to 5 seconds

   The reader may be recessed or behind a thick panel. A quick tap might not register. Hold your card steady and flat against the symbol area.

3. 3

   Try your phone's digital wallet

   If the reader is hard to reach with a physical card, try Apple Pay or Google Pay on your phone. The NFC range on a phone can be slightly better at odd angles.

4. 4

   Use the Enel X Way app instead

   If the contactless terminal is genuinely inaccessible or not responding, start the session through the Enel X Way app. The app bypasses the physical reader entirely.

Charger placed in tight parking spots

Some Enel X Way stations are installed in existing parking structures or small lots where the charging spots are narrow. Maneuvering a larger EV into position and accessing the cable can be difficult.

Symptoms

• Charging spot is too narrow to open your car door fully
• Cable does not reach your vehicle's charging port because of the parking angle
• Other parked cars block access to the charger
• You have to reverse in at a specific angle to make the cable reach

How to Fix It

1. 1

   Check your vehicle's charging port location

   Before pulling in, note which side your charging port is on (front left, rear right, etc.) and position your car so the port faces the charger. This avoids stretching the cable across the car.

2. 2

   Try reversing in if the port is at the rear

   If your charging port is at the rear of the vehicle, reversing into the spot often gives you a shorter cable run and more room to connect.

3. 3

   Check adjacent spots before plugging in

   If two chargers are side by side and one has more room, use the more accessible one even if it means a slightly longer walk.

4. 4

   Leave your car door ajar while connecting

   Plug in the cable, then close your door and start the session from inside or via the app. You do not need to stand next to the charger for the entire session.

Power fluctuations or reduced charging speed

Some Enel X Way locations experience power fluctuations, especially during peak grid demand. Your charging speed may drop unexpectedly or fluctuate throughout the session.

Symptoms

• Charging speed starts high but drops significantly after a few minutes
• Speed fluctuates between 50 and 200 kW without stabilizing
• The charger delivers well below its advertised maximum
• Speed is lower in the evening than during daytime at the same station

How to Fix It

1. 1

   Check your battery level and temperature

   Most speed drops are caused by your vehicle, not the charger. Above 60 to 80% state of charge, your vehicle reduces its charging speed to protect the battery. Cold batteries also charge more slowly.

2. 2

   Check if other chargers at the station are in use

   Some Enel X Way stations share a power connection. If multiple chargers are active, the available power is split. Try charging when fewer vehicles are plugged in.

3. 3

   Try a different time of day

   Grid demand peaks in the early evening. If you notice slower speeds at certain hours, try charging during off-peak times (late evening or early morning) when the grid is less loaded.

4. 4

   Try a different charger unit

   An individual charger may have a hardware limitation. Another unit at the same station might deliver higher power.

5. 5

   Report persistent low speeds

   If a station consistently delivers far below its rated power, report it in the Enel X Way app. This helps their maintenance team investigate whether it is a hardware or grid supply issue.

App shows incorrect real-time availability

The Enel X Way app sometimes displays charger availability that does not match reality. You arrive expecting a free charger and find it occupied, or the app shows a charger as faulted when it actually works.

Symptoms

• App shows 'Available' but the charger is occupied when you arrive
• App shows 'Out of order' but the charger works fine
• Availability status does not change even after refreshing
• You planned your route based on app availability and found no working chargers

How to Fix It

1. 1

   Refresh the station page and check timestamps

   Pull down to refresh the station detail view. If the status was last updated more than 10 minutes ago, it may be stale.

2. 2

   Try plugging in regardless of the app status

   If the charger looks physically operational (lights on, screen active, no maintenance stickers), try plugging in and starting a session. The app status may simply be lagging.

3. 3

   Cross-check with another app

   Open Chargemap, Google Maps, or another charging app that shows Enel X Way stations. A different data source might have more current availability information.

4. 4

   Always have a backup station identified

   Do not rely on a single station, especially for long trips. Identify 1 or 2 alternative stations nearby before setting out, in case availability data is wrong.