Mercedes eSprinter Charging at Tesla Supercharger

Mercedes eSprinter Van Charger Will Not Start Session

You have plugged in your Mercedes eSprinter and nothing is happening. Whether at the depot or a public charger mid-route, a session that will not start is a problem. The eSprinter uses standard CCS2 and Type 2 connectors, so the issue is usually authentication, settings, or the charger itself.

Symptoms

• CCS2 or Type 2 connector plugged in but no charging session starts
• MBUX does not show any charging activity
• The charger screen shows an error after plug-in
• The charge port indicator does not light up
• Depot wallbox shows no activity when the eSprinter is connected

What to Do

1. 1

   Authenticate with the charger

   At public stations, tap your RFID or fleet card, or use the charging app before plugging in. Wait for the charger screen to confirm the session is starting.

2. 2

   Firmly reinsert the connector

   Remove the connector, check the charge port for dirt or debris, then reinsert it firmly until you hear the locking click.

3. 3

   Disable departure time charging

   In MBUX, go to the charging settings and turn off any departure time or scheduled charging. This allows immediate charging when you plug in.

4. 4

   Check depot charging queue

   If at the depot, check with your fleet manager whether load management is queuing your van. Some systems show queue status on the wallbox display.

5. 5

   Lock and unlock the eSprinter

   Lock the van with the key, wait 20 seconds, then unlock. This resets the charging system and can clear fault states.

6. 6

   Try a different charger

   If the charger cannot negotiate with the eSprinter's LFP battery system, try a newer or higher-rated charger. Some older 50 kW chargers have compatibility issues.

Mercedes eSprinter Van Payment Failed at the Charger

You are at a public charger with your Mercedes eSprinter and the payment is not going through. With a large van and a delivery schedule to keep, payment problems are the last thing you need. Here is how to resolve it quickly and get back on the road.

Symptoms

• Fleet charging card is declined at the charger
• RFID card does not register when tapped
• Charging app shows a payment or authorization error
• Contactless bank card is declined
• The charger screen shows an error and will not start the session

What to Do

1. 1

   Check which payments the charger accepts

   Read the stickers and screen on the charger. If your fleet card logo is not shown, the charger is not on your network.

2. 2

   Try an alternative payment method

   Use a personal RFID card, a different charging app, or a contactless bank card. Keep the receipt for reimbursement from your company.

3. 3

   Check fleet card status

   Contact your fleet manager or the card provider to verify the card is active and has not exceeded its spending limit.

4. 4

   Hold the card steadily for 3 seconds

   Place the card flat on the reader without moving. Remove gloves if wearing them. Some readers need a full 3-second contact to register.

5. 5

   Cancel any stuck sessions

   If a previous payment attempt is stuck, cancel it in the app and wait a minute before trying again.

6. 6

   Move to a different charger

   If the payment terminal is broken, try the next unit. Do not waste delivery time on a faulty card reader.

Mercedes eSprinter Van Charging Slower Than Expected

Your Mercedes eSprinter has a large 113 kWh LFP battery, which means charging sessions take longer than smaller vans even at peak speed. But if you are seeing speeds well below 115 kW on DC, something else is going on. Here is what to check.

Symptoms

• DC fast charging well below the 115 kW maximum
• Depot AC charging is slow with the large 113 kWh battery
• Charging speed drops sharply after 50-60% state of charge
• Cold weather charging starts at very low power
• A full DC charge takes significantly longer than expected

What to Do

1. 1

   Use navigation to precondition the battery

   Set the DC charger as your destination in the MBUX navigation. The eSprinter will precondition the LFP battery to the ideal temperature, which is critical for fast charging, especially in cold weather.

2. 2

   Plan charging stops for low state of charge

   Charge between 10-60% for the fastest DC speeds. With the LFP battery, you can safely charge to 100% daily without degradation concerns, but the last 20% will be slow.

3. 3

   Use high-power chargers

   Choose chargers rated 150 kW or higher to ensure the eSprinter can reach its 115 kW peak. On a 50 kW charger, a 113 kWh battery takes a very long time.

4. 4

   Upgrade depot chargers if needed

   For a 113 kWh battery, 11 kW three-phase AC is the minimum for reliable overnight charging. If your depot has single-phase or 7 kW chargers, discuss an upgrade with your fleet manager.

5. 5

   Avoid shared charger stalls

   At public stations, choose a charger where both connectors are free. With the eSprinter's large battery, shared power extends charging significantly.

6. 6

   Try a different charger

   If speeds are well below 80-90 kW at a low state of charge with a warm battery, the charger may be faulty. Try another unit.

Non-Tesla vehicle cannot find the station in the Tesla app

You arrive at a Supercharger with your non-Tesla EV but the station does not appear in the Tesla app, or it shows as Tesla-only.

Symptoms

• Tesla app shows the station but does not list it as open to other brands
• Station appears on the map but the 'Start Charging' button is grayed out
• App says 'This location is not available for your vehicle'
• You can see other non-Tesla vehicles charging but the app will not let you start

How to Fix It

1. 1

   Confirm the station is open to non-Tesla vehicles

   Not all Supercharger locations are open to other brands. In the Tesla app, look for stations marked with a label indicating non-Tesla access. If there is no such label, the station is Tesla-only.

2. 2

   Update the Tesla app

   Tesla frequently adds new non-Tesla locations. If your app is outdated, recently opened stations may not appear as accessible. Update to the latest version.

3. 3

   Check your Tesla account setup

   You need a Tesla account with a valid payment method added, even if you do not own a Tesla. Open the app, go to your account settings, and confirm a credit or debit card is saved.

4. 4

   Try selecting the specific stall number

   After plugging in, open the Tesla app, select the station, and tap the stall number that matches the one you plugged into. The stall number is printed on the charger post.

5. 5

   Restart the Tesla app

   Force-close and reopen the app. Location and station data sometimes fails to load correctly on the first attempt.

Payment hold is larger than expected

Tesla places a pre-authorization hold on your payment method when you start a Supercharger session. This hold can be surprisingly large and may temporarily reduce your available balance.

Symptoms

• Bank notification shows a hold of 50 to 120 EUR before charging begins
• Available balance on your debit card drops significantly
• Multiple holds appear from previous sessions that have not been released yet
• Hold amount does not match the actual charging cost

How to Fix It

1. 1

   Understand that holds are temporary

   Tesla pre-authorizes a fixed amount to ensure payment. The actual charge replaces the hold once the session is complete. The hold typically releases within 1 to 5 business days depending on your bank.

2. 2

   Use a credit card instead of a debit card

   Credit cards handle pre-authorization holds without affecting your available cash balance. Debit cards temporarily lock the held amount from your account.

3. 3

   Check the Tesla app for final session cost

   After charging, the Tesla app shows the actual amount you will be billed. This is always less than or equal to the pre-authorization hold.

4. 4

   Contact your bank if holds persist beyond 7 days

   If a hold has not been released after a week, contact your bank and provide the transaction reference from the Tesla app. Banks can manually release stale holds.

Session ends early or stops unexpectedly

Charging stops before reaching your target battery level. The car disconnects or the Supercharger stops delivering power mid-session.

Symptoms

• Charging stops at 80% even though you set a higher limit
• Session ends after a few minutes with no error message
• Car shows 'Charging interrupted' or 'Check charge cable'
• Supercharger light turns from green to red or flashing

How to Fix It

1. 1

   Check your charge limit setting

   Tesla vehicles default to an 80% charge limit. Non-Tesla vehicles have their own limit settings in the infotainment system. Verify you have set the limit above where charging stopped.

2. 2

   Reseat the cable connector

   Unplug the cable, inspect the connector and your vehicle's charge port for debris, and plug it back in firmly. A loose connection can cause the session to drop.

3. 3

   Try a different stall

   Individual Supercharger stalls can have intermittent faults. Move to another stall, preferably one that is not paired with an active session (stalls sharing a power cabinet are usually labeled with paired numbers like 1A/1B).

4. 4

   Check for idle fees

   If you reached your charge limit and did not unplug promptly, Tesla may have ended the session and started idle fees. Check the Tesla app for notifications.

5. 5

   Restart your vehicle

   For non-Tesla vehicles, turn the car off completely, wait 30 seconds, and turn it back on. Then plug in again. Some vehicles need a restart to clear communication errors with the Supercharger.

Reduced charging speed due to power sharing

Your charging speed is significantly lower than the station's advertised maximum. This often happens because Supercharger stalls share power with a paired stall.

Symptoms

• Charging at 60 to 80 kW at a station rated for 250 kW
• Speed dropped when another vehicle plugged in at a nearby stall
• Speed is much lower than you got at the same station previously
• One stall charges fast while the paired stall is very slow

How to Fix It

1. 1

   Move to an unpaired stall

   Tesla Supercharger stalls are paired (for example, 1A and 1B share a power cabinet). If someone is using 1A, stall 1B will be slower. Choose a stall where neither paired unit is occupied.

2. 2

   Look at the stall labels

   Paired stalls usually share a number with A/B suffixes, or are directly adjacent. At V3 Superchargers (250 kW), power sharing is less of an issue than at older V2 stations (150 kW).

3. 3

   Check your battery temperature

   Tesla vehicles precondition the battery automatically when navigating to a Supercharger. If you did not use Tesla navigation (or you drive a non-Tesla), the battery may be cold and limiting charge speed on its own.

4. 4

   Arrive with a lower state of charge

   Charging speed decreases as the battery fills. For the fastest stop, arrive between 5 and 20% if you can do so safely. The difference in charge speed between arriving at 10% versus 40% is significant.

Non-Tesla vehicle CCS2 connector issues

At Supercharger stations open to non-Tesla vehicles, the CCS2 connector may not work correctly with your car. In Europe, open Supercharger stations have native CCS2 cables, so no adapter is needed.

Symptoms

• The CCS2 connector does not lock into your vehicle's charge port
• Session starts but drops after a few seconds
• Tesla app does not recognize your vehicle after plugging in
• The connector fits but no power is delivered

How to Fix It

1. 1

   Make sure you are using the CCS2 cable, not the Tesla connector

   Open Supercharger stations in Europe have separate CCS2 cables alongside Tesla connectors, or dedicated CCS2 posts. Use the CCS2 cable for non-Tesla vehicles.

2. 2

   Push the connector in firmly until it clicks

   CCS2 connectors need a firm push to fully seat and lock. If the connector is loose, the charger cannot communicate with your vehicle.

3. 3

   Start the session through the Tesla app

   Select the correct stall number in the Tesla app and start the session. The stall number is printed on the charger post. It must match exactly.

4. 4

   Try a different stall

   Individual stalls can have faulty connectors. Move to another stall, preferably one that is not paired with an active session.

5. 5

   Check vehicle compatibility

   Not all non-Tesla vehicles work perfectly at every Supercharger station. If your vehicle repeatedly fails to connect, check Tesla's website or app for your vehicle's compatibility status.