Mercedes-Benz EQC Charging at K-Lataus

Mercedes-Benz EQC Charger Won't Start: Quick Fixes

You have plugged your Mercedes-Benz EQC into a public charger, but nothing is happening. No charging animation on MBUX, no power flowing, just a dead charger screen. This is one of the most common frustrations at public stations, and the fix is usually simple.

Symptoms

• The charger display shows 'connect vehicle' even though the cable is connected
• MBUX does not indicate any charging activity
• The EQC's charge port LED stays off or blinks without starting
• The charger shows an error code after plugging in
• The CCS2 plug does not click securely into the port

What to Do

1. 1

   Unlock the EQC

   Make sure the car is unlocked. The charge port only opens and accepts a connector when the EQC is unlocked.

2. 2

   Insert the connector firmly

   Push the CCS2 or Type 2 connector straight into the port until it clicks. The EQC's charge port is on the right rear side. A locked connector initiates the communication protocol.

3. 3

   Start the session at the charger

   Tap your RFID card, open the network app, or use contactless payment. The charger needs this step before it will send power to the EQC.

4. 4

   Check MBUX for scheduling conflicts

   In MBUX, navigate to EV settings and check for charging schedules. If one is active, switch to immediate charging.

5. 5

   Unplug and reconnect

   Remove the cable, wait 15 seconds, and plug it back in. This resets the handshake between the EQC and the charger.

6. 6

   Move to a different charger

   If nothing works, the charger is likely faulty. Try a different stall or station and report the broken charger through the network app.

Mercedes-Benz EQC Charging Payment Rejected: Fixes

Your Mercedes-Benz EQC is plugged in and ready, but the charger will not accept your payment. RFID card ignored, app throwing errors, or bank card declined. This is not an EQC issue, but it still stops you from charging. Here is what to do.

Symptoms

• The charger displays 'authentication failed' or 'payment error'
• RFID card tap gets no response from the charger
• The charging app fails with a payment error when starting a session
• Contactless bank card is declined at the terminal
• The charger asks for payment but you have no compatible method

What to Do

1. 1

   Try a different payment method

   Switch from RFID to the app, or from the app to a contactless bank card. Most chargers support multiple payment options.

2. 2

   Verify your account status

   Open the charging app and check your payment method, balance, and subscription. Fix any expired cards or low balances.

3. 3

   Check which networks are accepted

   Look at the charger for logos of supported providers. If your provider is not there, look for a QR code for ad-hoc payment.

4. 4

   Use the QR code for direct payment

   Scan the QR code on the charger with your phone. It opens a web-based payment page where you can use any bank card without an app.

5. 5

   Cancel and retry

   If payment appeared to process but charging did not start, cancel the session in the app and authorize a new one.

6. 6

   Call the network support number

   Most chargers display a support phone number. The operator can sometimes start sessions remotely or identify payment issues.

Mercedes-Benz EQC Charging Slow: No Preconditioning

Your Mercedes-Benz EQC 400 4MATIC supports up to 112kW DC fast charging, but you are seeing much lower numbers on the MBUX display. Unlike newer Mercedes EVs, the EQC does not have battery preconditioning, which makes cold weather charging particularly slow. Here is what is happening and what you can do about it.

Symptoms

• DC charging power shown on MBUX is well below 112kW
• The 80kWh battery takes much longer to charge than expected
• Charging speed drops significantly above 70% state of charge
• AC charging is stuck at or below 11kW
• Cold weather charging is noticeably slower than in summer

What to Do

1. 1

   Check charging power in MBUX

   Open the charging status screen on MBUX. It shows current kW, battery temperature, and estimated time. This helps identify whether the car or charger is limiting speed.

2. 2

   Warm the battery through driving

   Since the EQC lacks automatic preconditioning, the best approach is to drive at motorway speeds for at least 20 to 30 minutes before arriving at a fast charger. This passively warms the battery and improves charging speed.

3. 3

   Choose chargers rated at 120kW or more

   Use the Mercedes me app or a charger map to find high-power stations. To reach the EQC's 112kW peak, the charger needs to be rated at 120kW or higher.

4. 4

   Avoid shared stalls

   At stations with paired CCS2 connectors, pick a pair where the other stall is empty. This gives the EQC the full charger output.

5. 5

   Charge between 10% and 80%

   Plan stops to arrive between 10% and 15% and leave at 80%. The EQC charges fastest in this range.

6. 6

   Avoid charging from a cold start in winter

   If possible, do not stop for a fast charge immediately after the car has been parked overnight in freezing temperatures. Drive for a while first to let the battery warm up naturally.

Session fails to start or charger shows an error

The charger does not begin charging after you plug in and authenticate. This can happen due to communication issues between your vehicle and the charger, or a problem with authentication.

Symptoms

• You plug in and authenticate but the charger displays an error
• The charger screen stays on the welcome screen and does not proceed
• The app shows 'session starting' but nothing happens at the charger
• The connector locks but no power flows

How to Fix It

1. 1

   Unplug, wait 30 seconds, and try again

   The initial communication handshake between your vehicle and the charger sometimes fails. Unplug the connector, wait at least 30 seconds, and reconnect. The second attempt often works.

2. 2

   Try starting the session from the K-Lataus app

   If RFID authentication is not working, open the K-Lataus app, select the station and charger, and start the session through the app instead.

3. 3

   Try a different charger unit at the same station

   If the station has multiple charger units, switch to another one. One unit may have a hardware issue while the others work fine.

4. 4

   Check that your vehicle is ready to charge

   Make sure your vehicle is not in a state that prevents charging, such as a charging schedule being active, the charge port not fully engaged, or a vehicle-side error. Check your vehicle's dashboard for any warnings.

Setting up the K-Lataus app for the first time

K-Lataus has its own dedicated app. First-time setup requires a K-Group account and a payment method linked specifically to the K-Lataus service.

Symptoms

• You are not sure which app to use for K-Lataus charging
• Your K-Group login works on the K-Group website but not in the K-Lataus app
• You cannot find a way to add a payment method for charging
• You cannot find the K-Lataus app in your app store

How to Fix It

1. 1

   Install the K-Lataus app

   Search for 'K-Lataus' in the App Store or Google Play and install it. This is the dedicated app for K-Lataus EV charging. K-Ruoka is for groceries, not for charging.

2. 2

   Log in with your K-Group credentials

   Use the same K-Group username and password you use for other K-Group services. If you do not have a K-Group account yet, you can create one in the app.

3. 3

   Add a payment method in the K-Lataus app

   Go to payment settings in the K-Lataus app and add a credit or debit card. The K-Lataus app manages its own payment methods separately from other K-Group services.

4. 4

   Find a station and start your first session

   Use the map in the K-Lataus app to find a nearby station. Plug in your vehicle, then tap Start in the app or use an RFID card to begin charging.

Parking time limits at grocery store locations

K-Lataus chargers sit in K-Citymarket and K-Market parking lots, which often have monitored parking with time limits. You may get a parking notice if you stay too long.

Symptoms

• You see parking time limit signs (e.g. 2 or 3 hours) in the parking lot
• You received a parking notice even though you were charging
• Your charging session takes longer than the allowed parking time
• Camera-monitored parking is active in the lot

How to Fix It

1. 1

   Check the parking rules when you arrive

   Most K-Citymarket and K-Market parking lots have posted time limits, often 2 to 4 hours, enforced by camera monitoring or a parking operator. These rules apply to EV charging spots too.

2. 2

   Use a parking disc if required

   Many Finnish parking lots still require a parking disc (pysäköintikiekko). Set the arrival time and display it on your dashboard, even if the lot also has camera monitoring.

3. 3

   Set a phone timer to move your car

   If you are shopping while charging, set an alarm so you can return before the parking limit expires. A DC fast charger at 200 kW should get you a substantial charge well within a 2-hour window.

4. 4

   Unplug when charging is complete

   Do not leave your vehicle occupying the charging spot after it finishes. Other EV drivers need the spot, and some parking operators treat finished-but-still-connected vehicles as overstaying.

New stations not appearing in third-party apps

K-Lataus is expanding its network, but newer stations sometimes take weeks to appear in third-party apps and aggregators like PlugShare or Google Maps.

Symptoms

• The K-Lataus app shows a station that does not appear in PlugShare or ABRP
• You planned a route using a third-party app and it skipped a nearby K-Lataus station
• A station listed as 'coming soon' in the K-Lataus app is actually already operational
• Google Maps does not show K-Lataus chargers at a location where you know they exist

How to Fix It

1. 1

   Use the K-Lataus app as the primary source for station locations

   The K-Lataus app is always the most up-to-date source for K-Lataus stations. Third-party apps rely on data feeds that may lag behind actual station openings by days or weeks.

2. 2

   Cross-check with the K-Lataus website

   The K-Lataus website also maintains a station map. Check it if the app is not giving you the information you need or if you want to plan ahead on a larger screen.

3. 3

   Report missing stations to third-party apps

   If you use PlugShare or ABRP regularly, you can add missing stations yourself. This helps other EV drivers find K-Lataus locations that are not yet in the database.

4. 4

   For route planning, combine K-Lataus with other network apps

   When planning a longer trip, check the K-Lataus app alongside ABRP or a similar route planner. The K-Lataus app shows the latest stations, while the route planner optimizes your overall charging stops across all networks.

Slow charging or failed sessions at older units in winter

Some older K-Lataus charger units perform less reliably in extreme cold. Winter in Finland brings temperatures that can affect both the charger hardware and your vehicle's battery.

Symptoms

• The charger takes a long time to initialize in freezing conditions
• Session fails with a generic error after a long handshake attempt
• Charging speed is much lower than expected at a 200 kW station
• The charger screen is slow to respond or displays incorrectly in cold weather

How to Fix It

1. 1

   Precondition your battery before arriving

   If your vehicle has a battery preconditioning feature (most newer EVs do), activate it before arriving at the charger. A warm battery accepts power faster and communicates more reliably with the charger during the initial handshake.

2. 2

   Try unplugging and reconnecting

   In cold weather, the initial handshake between your vehicle and the charger can time out. Unplug, wait 30 seconds, and try again. Sometimes the second attempt connects cleanly.

3. 3

   Try a different charger unit at the same station

   If the station has multiple charger units, one may be more reliable than the other. Older units can have more cold-weather issues than newer installations.

4. 4

   Report consistently problematic chargers

   If a specific charger unit fails repeatedly in cold weather, report it through the K-Lataus app. This helps K-Group identify hardware that needs maintenance or replacement.

5. 5

   Accept that cold weather reduces charging speed

   Even when everything works perfectly, a cold battery charges slower. This is a physics limitation, not a charger fault. The first 10 to 15 minutes of a session may be slower until the battery warms up from the charging current itself.