Mercedes-Benz EQB Charging at ABC-lataus

Mercedes-Benz EQB Charger Won't Start: Quick Fixes

You have connected your Mercedes-Benz EQB to a public charger, but the session will not start. MBUX shows nothing, the charger sits idle, and you are wondering what is wrong. This is one of the most common complaints at public chargers, and it is usually fixable on the spot.

Symptoms

• The charger screen stays on 'waiting' or 'connect vehicle' after plugging in
• MBUX does not show any charging activity
• The EQB's charge port LED does not illuminate
• The charger returns an error code after you connect
• The CCS2 connector does not click into place

What to Do

1. 1

   Unlock the EQB and open the charge port

   Ensure the car is unlocked. Press the charge port flap to open it. On some EQB models, you can also open it through the Mercedes me app.

2. 2

   Insert the connector firmly

   Push the CCS2 or Type 2 connector straight into the port until it clicks. The charge port is on the right side of the EQB. A locked connector triggers the charging protocol.

3. 3

   Authenticate at the charger

   Tap your RFID card on the charger reader, start the session in the network app, or tap your bank card on the contactless terminal. The charger needs authorization before sending power.

4. 4

   Disable scheduled charging in MBUX

   In MBUX, navigate to EV settings, then charging. If a schedule is set, switch to immediate charging so the EQB does not wait for a timer.

5. 5

   Disconnect and retry

   Unplug the cable, wait 15 seconds, and reconnect. This forces a fresh handshake between the EQB and the charger.

6. 6

   Try another charger

   If the charger remains unresponsive, it is likely out of service. Move to a different stall or station and report the faulty unit through the network's app.

Mercedes-Benz EQB Charging Payment Failed: Fix Now

You have connected your Mercedes-Benz EQB to a charger, but the payment will not go through. RFID not recognized, app error, or bank card declined. This is a charger-side issue, not an EQB problem, but it still blocks your session. Here is how to get charging.

Symptoms

• The charger displays 'authentication failed' or 'payment declined'
• Your RFID card tap produces no response
• The charging app returns an error when starting a session
• Contactless bank card payment is declined
• The charger asks for payment but no method works

What to Do

1. 1

   Try an alternative payment method

   Switch from RFID to the charging app, or from the app to a contactless bank card. Having multiple options ensures one failure does not strand you.

2. 2

   Check your account status

   Open the charging app and verify your payment method, balance, and subscription status. Fix any issues before retrying.

3. 3

   Verify the charger supports your network

   Look for provider logos on the charger. If yours is not there, you need ad-hoc payment via QR code or a different provider.

4. 4

   Scan the QR code for ad-hoc payment

   Most European chargers have a QR code that opens a browser-based payment page. Pay with any bank card, no app needed.

5. 5

   Cancel and restart the session

   If payment seemed to go through but charging did not start, cancel in the app and try again with a fresh authorization.

6. 6

   Contact the network's support

   The charger should display a phone number. The operator can sometimes authorize sessions remotely or troubleshoot payment issues.

Mercedes-Benz EQB 350+ Charging Slow: How to Fix It

Your Mercedes-Benz EQB 350+ supports up to 102kW DC fast charging, which is moderate for its class. If the MBUX display is showing far less than that, every charging stop takes longer than it should. Here is what affects the EQB's charging speed and how to improve it.

Symptoms

• DC charging power shown on MBUX is well below 102kW
• Charging the 70.5kWh battery takes significantly longer than expected
• Speed drops noticeably above 70% state of charge
• AC charging is stuck below 11kW at a faster station
• MBUX displays a battery temperature warning or conditioning indicator

What to Do

1. 1

   Check charging power in MBUX

   Open the charging status screen on MBUX. It displays current kW, battery temperature, and estimated completion time. This tells you whether the car or charger is limiting speed.

2. 2

   Precondition the battery before arriving

   Enter the charging station as a destination in MBUX navigation. The EQB will precondition the battery to optimal temperature while you drive. This is the single most effective step in cold weather.

3. 3

   Find a charger rated at 100kW or more

   Use the Mercedes me app or a charger map to locate high-power stations. Ionity, Fastned, and some Shell Recharge stations offer 100kW+ chargers.

4. 4

   Avoid power-sharing stalls

   Choose a charger pair where the adjacent stall is empty. This gives the EQB the full output of the charger.

5. 5

   Charge between 10% and 80%

   Plan stops to arrive between 10% and 15% and leave at 80%. This keeps you in the EQB's fastest charging window.

6. 6

   Check for software updates

   Mercedes releases over-the-air updates that can improve charging behavior. Check MBUX under Settings for available updates.

Session fails to start or charger shows an error

You plug in and try to authenticate, but the charger does not begin charging. This can happen due to communication issues between your vehicle and the charger, or a problem with authentication.

Symptoms

• Charger shows an error after you try to start a session
• Contactless card payment does not work at this station (older unit without payment terminal)
• Card reader beeps but the session does not start
• The app says the session is starting but nothing happens at the charger

How to Fix It

1. 1

   Unplug, wait 30 seconds, and try again

   The initial communication handshake between your vehicle and the charger can fail. Unplug the connector, wait at least 30 seconds, and reconnect. The second attempt often works.

2. 2

   Try starting the session through the ABC-lataus app

   If the card reader is not cooperating, open the ABC-lataus app, select the station, and start the session from your phone. This bypasses the physical card reader entirely.

3. 3

   Try contactless card payment at newer stations

   Some newer ABC-lataus high-power stations have a contactless payment terminal. If the app is not cooperating, look for a card reader on the charger unit and tap your bank card. Older stations may not have this option.

4. 4

   Try a different charger unit at the same station

   If the station has multiple charger units, switch to another one. One unit may have a hardware issue while the others work fine.

Finding the EV charger at a busy fuel station

ABC-lataus chargers are located at ABC fuel stations, which also serve diesel and petrol vehicles. The EV charging spots can be easy to miss if you are visiting for the first time.

Symptoms

• You arrived at the ABC station but cannot see the EV charger
• The charger is behind the fuel pump area or in a separate parking section
• Other vehicles (non-EV) are parked in the charging spots
• Signage is not visible from the main road entrance

How to Fix It

1. 1

   Check the ABC-lataus app for the charger's exact location

   The app shows station details including photos or layout hints. Some ABC stations place chargers at the far end of the parking area, away from the fuel pumps.

2. 2

   Look for the CCS2 cable and charging unit

   The charger unit is taller than a fuel pump and usually has a clearly different design. Look for a separate bay with a CCS2 cable, often marked with green signage or an EV symbol on the ground.

3. 3

   Drive past the fuel pumps

   At many ABC stations, the EV charger is positioned after the fuel pump area or in a dedicated corner of the parking lot. Do not stop at the fuel pumps. Continue through and scan for the charging unit.

4. 4

   If an ICE vehicle is blocking the spot, report it

   ABC stations serve all types of vehicles. If a non-EV is parked in the charging bay, contact ABC customer service through the app. Unfortunately, there is not much you can do in the moment besides trying another station.

App setup confusion within the S-Group ecosystem

The ABC-lataus app is part of the S-Group digital ecosystem. If you already use S-mobiili for groceries or fuel, the relationship between the apps can be confusing.

Symptoms

• You are not sure whether to use S-mobiili or the ABC-lataus app
• Your S-Group login works in one app but not the other
• Charging payments do not appear in your S-mobiili transaction history
• You created a new account instead of linking your existing S-Group membership

How to Fix It

1. 1

   Use the ABC-lataus app for starting and managing charging sessions

   While S-mobiili handles your broader S-Group membership, the ABC-lataus app is the dedicated tool for finding stations, starting sessions, and viewing charging history. Install it separately from the App Store or Google Play.

2. 2

   Log in with your existing S-Group credentials

   Use the same username and password you use for S-mobiili or s-kanava.fi. Do not create a new account.

3. 3

   Check payment method settings in the ABC-lataus app

   Even if you have a payment card saved in S-mobiili, the ABC-lataus app may require you to add a payment method separately. Go to settings or payment in the ABC-lataus app and add your card there.

4. 4

   Verify your account is set up for charging

   Check the ABC-lataus app settings to make sure your payment method is saved and charging is enabled.

Connector stuck or difficult to insert in winter cold

Finnish winters mean temperatures well below freezing. The CCS2 connector locking mechanism and the vehicle's charge port can freeze, making it hard to plug in or unplug.

Symptoms

• The CCS2 connector will not click into your vehicle's charge port
• The connector is plugged in but the locking mechanism will not engage
• You cannot release the connector after charging is complete
• The connector handle feels stiff or the release button is frozen

How to Fix It

1. 1

   Check your vehicle's charge port for ice

   Open the charge port door and look for ice buildup around the opening or inside the port. Brush away any loose ice or snow with your hand or a soft brush. Do not use sharp tools, as you can damage the pins.

2. 2

   Warm the connector in your hands for a moment

   If the connector handle feels frozen stiff, hold it in your hands for 30 seconds to warm the mechanism slightly. The locking button and release lever work better when they are not frozen solid.

3. 3

   Push the connector in firmly and straight

   In cold weather, plastic contracts and tolerances get tighter. Line up the connector carefully and push it in with steady, even pressure. Do not force it at an angle.

4. 4

   If the connector is stuck after charging, try unlocking from your car

   Use your vehicle's unlock button or the in-car menu to release the charge port lock. Some vehicles also release the connector when you unlock the doors. If it is still stuck, wait a few minutes. The charging session generates heat that may free the mechanism.

5. 5

   Contact support if the connector will not release

   Do not yank the connector. Forcing it can damage both the cable and your vehicle's charge port. Call ABC-lataus support and they can guide you through a remote release or send help.

Charging session starts but power delivery is low

The charger is rated for 200 kW, but your session is delivering significantly less. Several factors specific to ABC-lataus stations can contribute.

Symptoms

• Dashboard shows 30 to 50 kW at a 200 kW rated charger
• Charging speed drops after a few minutes
• Speed is lower than what you get at other fast chargers
• The charger screen shows a lower maximum than 200 kW

How to Fix It

1. 1

   Check your vehicle's maximum DC charging rate

   A 200 kW charger does not mean your vehicle can accept 200 kW. Many EVs max out at 50 to 150 kW depending on the model, battery temperature, and state of charge. Check your vehicle's specifications.

2. 2

   Consider battery temperature in Finnish conditions

   Cold batteries accept less power. If your vehicle has been parked outside in freezing temperatures, the battery may need to warm up before it can accept higher charging speeds. Some vehicles have a preconditioning feature you can activate before arriving.

3. 3

   Check if another vehicle is sharing the station's power

   Some ABC-lataus locations share power between charger units. If another vehicle is charging at the same station, your available power may be split. This is normal and not a fault.

4. 4

   Arrive with a lower state of charge for faster charging

   Charging is fastest between 10% and 50% state of charge. If you arrive at 60% or higher, the charger will taper the power to protect your battery. This is your vehicle's doing, not the charger's.