Kia EV9 Charging at Fastned

Kia EV9 Charger Won't Start? Step-by-Step Fix Guide

You have plugged the cable into your EV9's right rear charge port, but nothing is happening. No charging indicator on the panoramic display, no LED confirmation. On a large SUV you rely on for family trips or long drives, a failed charge start can be stressful. In most cases, the issue is authentication, utility mode being on, a car setting, or the charger itself.

Symptoms

• CCS2 or Type 2 cable plugged in but no charging indicator on the panoramic display
• Charge port LED stays off or flashes red
• Charger screen shows an error or remains on the start screen
• Kia Connect app shows the car is not connected to a charger
• Charging starts briefly then stops within a few seconds

What to Do

1. 1

   Turn off V2L utility mode

   On the EV9's infotainment screen, go to EV settings. Make sure utility mode or V2L is turned off. Also check the exterior V2L outlet on the rear bumper. If a device was plugged in there, the car may still be in discharge mode.

2. 2

   Check the charge port and cable

   Open the charge port on the right rear fender. The EV9 is a tall vehicle, so the port is relatively high. Press the flap firmly to open. Insert the CCS2 connector straight in until it clicks. The LED should light up.

3. 3

   Authenticate with the charger

   If Plug & Charge does not start the session, tap your RFID card, use the charging network's app, or try contactless payment. Have a backup method ready.

4. 4

   Check for a charging schedule

   On the infotainment screen, go to EV settings, then Scheduled Charging. If a schedule is active, disable it or tap 'Charge Now' to override. The Kia Connect app can also manage schedules.

5. 5

   Unplug, wait 30 seconds, and try again

   Remove the cable completely, wait 30 seconds, reconnect, and re-authenticate. This resets the communication between the EV9 and the charger.

6. 6

   Try a different charger

   If nothing works, try another stall at the same station or a different station. Report the broken charger through the charging network's app.

Kia EV9 Charger Payment Failed at a Public Station

You are at a public charger with your EV9, the CCS2 cable is connected, but the payment will not go through. The charger shows an error, the app is not cooperating, or your RFID card gets nothing. Payment problems are one of the most common reasons charging fails to start, and they are almost never a car problem. Here is how to work through it.

Symptoms

• Charger screen shows 'payment failed' or 'authorization error'
• RFID card tapped but the charger does not respond
• Charging network app shows an error during authorization
• Plug & Charge does not start the session automatically
• Contactless card payment declined at the terminal

What to Do

1. 1

   Try a different payment method

   If RFID failed, try the charging network's app. If the app failed, try contactless payment with a card. Switch between methods quickly rather than retrying the same one.

2. 2

   Check your charging network account

   Open the charging app and check your payment details. Look for expired cards, low prepaid balances, or account issues. Update your payment method if needed.

3. 3

   Verify Plug & Charge configuration

   In the Kia Connect app, check that Plug & Charge is enabled and linked to the correct charging network. Also verify that this specific station supports Plug & Charge. Not all stations do.

4. 4

   Look for a QR code on the charger

   Many chargers have a QR code that opens a web payment page. This lets you pay without an account or app. Scan it with your phone camera.

5. 5

   Try a different charger at the same station

   If one stall's payment terminal is not working, another may be fine. Walk to the next charger and try your payment method again.

Kia EV9 Charging Slower Than Expected at DC or AC

The EV9 is Kia's largest electric SUV, with a 96 kWh battery and 800V architecture that supports up to 233 kW DC charging. When you see 60 kW on the charger screen instead of 200+, it does not match what the specs promise. In most cases, slow charging on the EV9 comes down to battery temperature, the charger's actual voltage and output, or a car setting worth checking.

Symptoms

• DC fast charging speed well below the 233 kW maximum
• AC charging stuck at 3-4 kW instead of the full 11 kW
• Charging speed drops sharply above 60-70% state of charge
• Session starts at low power and never ramps up
• Panoramic display shows much lower power than the charger's rated output

What to Do

1. 1

   Check the battery temperature

   Look at the EV information on the panoramic display. If the battery is cold, use the built-in navigation to set a charging destination. The EV9 will precondition the battery automatically on the way. This is especially important in winter given the large battery.

2. 2

   Check whether the charger supports 800V

   Look at the charger specs on its screen or in the charging network's app. If it is a 400V charger, the EV9's multi-charging system handles the conversion, but you will not see 233 kW. Seek out chargers that explicitly list 800V support.

3. 3

   Check your state of charge

   If you are above 80%, the speed drop is normal. For road trips, plan stops to arrive between 10-20% and unplug at 80%. The EV9's consumption is around 204 Wh/km, so factor that into your stop planning.

4. 4

   Review scheduled charging and charge limits

   On the EV settings screen or in the Kia Connect app, check that scheduled charging is not delaying the session and the charge current limit is at maximum.

5. 5

   Check if the charger is sharing power

   Look at the charger cabinet. If two cables come from the same unit and someone is on the other cable, your speed may be halved. Move to an unoccupied charger if one is available.

6. 6

   Try a different charger or station

   If speed is still low after checking everything, the charger may be underperforming its rated output. Try another stall or head to a different station.

Autocharge not recognizing your vehicle

You have Autocharge set up in the Fastned app, but when you plug in, the charger asks for payment instead of starting automatically.

Symptoms

• Charger screen prompts for app or card payment after plugging in
• Screen shows 'Vehicle not recognized' or goes straight to the payment screen
• Autocharge worked at other Fastned stations but not this one
• You recently changed your vehicle or payment method in the Fastned app

How to Fix It

1. 1

   Check Autocharge status in the Fastned app

   Open the Fastned app, go to your account or Autocharge settings, and verify that Autocharge is toggled on and linked to your current vehicle. If you switched vehicles recently, you may need to re-register the new one.

2. 2

   Unplug, wait 15 seconds, and plug in again

   The Autocharge handshake happens in the first few seconds. If the timing was off or the connector was not fully seated, the charger defaults to manual payment. Try again with a firm, steady plug-in.

3. 3

   Make sure your payment method is valid

   Autocharge bills your saved payment method automatically. If the card on file has expired or been blocked, Autocharge will fail even though your vehicle is recognized. Update your payment details in the Fastned app.

4. 4

   Verify your vehicle supports Autocharge

   Autocharge requires the vehicle to transmit a unique identifier through the charging cable (MAC address). Most newer EVs support this, but some older models or specific firmware versions do not. Check Fastned's website for a compatibility list.

5. 5

   Start the session via the app as a workaround

   If Autocharge is not cooperating, open the Fastned app, select the station and charger, and start the session manually. You will still get your Gold Member or regular pricing.

Contactless card reader not responding

You tap your debit or credit card on the contactless reader, but nothing happens. No beep, no screen change, no error.

Symptoms

• No response from the reader when tapping a card
• Reader beeps but the screen shows 'Transaction failed'
• Card works at shops and other chargers but not at this Fastned station
• Apple Pay or Google Pay does not trigger the reader

How to Fix It

1. 1

   Locate the correct reader

   Fastned chargers have the contactless reader built into the charger unit. It is usually a small pad with the contactless symbol near the screen. Make sure you are tapping on the reader, not on the screen itself.

2. 2

   Hold your card still for 3 to 5 seconds

   Do not tap and remove quickly. Hold the card flat against the reader and wait. Some readers are slower than retail terminals.

3. 3

   Remove your card from its wallet or phone case

   Other cards, RFID badges, or phone cases with magnets can interfere with the contactless signal. Try the card on its own, directly on the reader.

4. 4

   Try a different card

   Some card issuers block pre-authorization transactions above a certain threshold. Fastned may pre-authorize 100 EUR or more. If your card's contactless limit is lower, the transaction fails.

5. 5

   Use the Fastned app instead

   If the contactless reader is faulty, start the session through the Fastned app. You can also use a roaming RFID card from providers like Shell Recharge or Chargemap.

Charger cable too short for your vehicle

The charging cable attached to the Fastned station does not reach your vehicle's charge port. This depends on your vehicle's port position and how you park.

Symptoms

• Cable reaches the port but is stretched tight with no slack
• Cable does not reach at all when parked normally
• You need to reverse in or park at an awkward angle
• Cable reaches but the connector presses against the car body at a sharp angle

How to Fix It

1. 1

   Reposition your vehicle

   Try parking closer to the charger or at a different angle. If your charge port is on the front left, back in so the port is closest to the cable. Many Fastned stations are designed for pull-through parking.

2. 2

   Try the other cable

   Fastned chargers typically have two cables (CCS2 and CHAdeMO, or two CCS2 cables from different sides). The cable on the other side of the charger may reach more easily.

3. 3

   Try a different charger at the same station

   If the station has multiple charger units, another one may give you a better angle. Charger positions vary slightly across units.

4. 4

   Do not force a stretched cable

   A cable under tension can damage the connector, your charge port, or the cable itself. If it does not reach comfortably, reposition the car. A damaged connector can shut down the charger for everyone.

Speed throttling when multiple vehicles are charging

Your charging speed drops when other vehicles start charging at the same Fastned station. This is power sharing in action.

Symptoms

• Charging started at 150 kW and dropped to 80 kW when another car plugged in
• Speed is lower at a busy station than at the same station when it was empty
• Dashboard shows the charger is limiting power, not the battery
• Speed fluctuates as other vehicles arrive and leave

How to Fix It

1. 1

   Understand how Fastned power sharing works

   Most Fastned stations have a total power budget shared across all active chargers. When more vehicles charge simultaneously, each one gets a smaller share. This is a station design limitation, not a fault.

2. 2

   Charge during off-peak hours if possible

   Fastned stations along highways are busiest during weekend travel peaks and holiday periods. Early morning or late evening sessions often mean you have the station to yourself and get full speed.

3. 3

   Choose a station with more capacity

   Newer Fastned stations and recently upgraded locations tend to have larger power budgets. The Fastned app shows the maximum kW per station. Stations rated at 400 kW per charger usually have more headroom than 150 kW stations.

4. 4

   Do not wait for full speed. Charge what you need and go.

   Even at reduced speed, DC fast charging is much faster than AC. If you are getting 80 kW instead of 150 kW, it takes a few extra minutes, not hours. Charge to 80% and continue your trip.

Busy station with no queue management

You arrive at a Fastned station and all chargers are occupied. There is no official way to join a queue or reserve a spot.

Symptoms

• All chargers are in use and multiple cars are waiting
• No clear queue order. Confusion about who arrived first.
• App does not show how many vehicles are waiting
• You are not sure if you should wait or drive to another station

How to Fix It

1. 1

   Check the Fastned app for nearby alternatives

   Before committing to a wait, check if there is another Fastned station or competitor fast charger within 10 to 15 minutes. Waiting 20 minutes for a spot is often slower than driving to a nearby empty station.

2. 2

   Communicate with other waiting drivers

   Fastned does not have a formal queue system. If you decide to wait, make yourself visible by parking near the charger area and, if comfortable, let other waiting drivers know you are in line. Brief eye contact and a nod go a long way.

3. 3

   Watch for vehicles at high state of charge

   If a vehicle on the charger is already above 80%, it will likely leave soon. Drivers charging from 80 to 100% at a DC fast charger are rare. Most will unplug and leave within minutes.

4. 4

   Plan stops to avoid peak times

   Holiday weekends, Friday afternoons, and Sunday evenings are the busiest. If your schedule is flexible, adjusting departure time by an hour or two can make a significant difference in charger availability.

5. 5

   Send feedback to Fastned

   Fastned expands stations based on utilization data. If a station is consistently full, reporting it through the app helps Fastned prioritize adding more chargers at that location.