Kia EV9 Charging at Badenova

Kia EV9 Charger Won't Start? Step-by-Step Fix Guide

You have plugged the cable into your EV9's right rear charge port, but nothing is happening. No charging indicator on the panoramic display, no LED confirmation. On a large SUV you rely on for family trips or long drives, a failed charge start can be stressful. In most cases, the issue is authentication, utility mode being on, a car setting, or the charger itself.

Symptoms

• CCS2 or Type 2 cable plugged in but no charging indicator on the panoramic display
• Charge port LED stays off or flashes red
• Charger screen shows an error or remains on the start screen
• Kia Connect app shows the car is not connected to a charger
• Charging starts briefly then stops within a few seconds

What to Do

1. 1

   Turn off V2L utility mode

   On the EV9's infotainment screen, go to EV settings. Make sure utility mode or V2L is turned off. Also check the exterior V2L outlet on the rear bumper. If a device was plugged in there, the car may still be in discharge mode.

2. 2

   Check the charge port and cable

   Open the charge port on the right rear fender. The EV9 is a tall vehicle, so the port is relatively high. Press the flap firmly to open. Insert the CCS2 connector straight in until it clicks. The LED should light up.

3. 3

   Authenticate with the charger

   If Plug & Charge does not start the session, tap your RFID card, use the charging network's app, or try contactless payment. Have a backup method ready.

4. 4

   Check for a charging schedule

   On the infotainment screen, go to EV settings, then Scheduled Charging. If a schedule is active, disable it or tap 'Charge Now' to override. The Kia Connect app can also manage schedules.

5. 5

   Unplug, wait 30 seconds, and try again

   Remove the cable completely, wait 30 seconds, reconnect, and re-authenticate. This resets the communication between the EV9 and the charger.

6. 6

   Try a different charger

   If nothing works, try another stall at the same station or a different station. Report the broken charger through the charging network's app.

Kia EV9 Charger Payment Failed at a Public Station

You are at a public charger with your EV9, the CCS2 cable is connected, but the payment will not go through. The charger shows an error, the app is not cooperating, or your RFID card gets nothing. Payment problems are one of the most common reasons charging fails to start, and they are almost never a car problem. Here is how to work through it.

Symptoms

• Charger screen shows 'payment failed' or 'authorization error'
• RFID card tapped but the charger does not respond
• Charging network app shows an error during authorization
• Plug & Charge does not start the session automatically
• Contactless card payment declined at the terminal

What to Do

1. 1

   Try a different payment method

   If RFID failed, try the charging network's app. If the app failed, try contactless payment with a card. Switch between methods quickly rather than retrying the same one.

2. 2

   Check your charging network account

   Open the charging app and check your payment details. Look for expired cards, low prepaid balances, or account issues. Update your payment method if needed.

3. 3

   Verify Plug & Charge configuration

   In the Kia Connect app, check that Plug & Charge is enabled and linked to the correct charging network. Also verify that this specific station supports Plug & Charge. Not all stations do.

4. 4

   Look for a QR code on the charger

   Many chargers have a QR code that opens a web payment page. This lets you pay without an account or app. Scan it with your phone camera.

5. 5

   Try a different charger at the same station

   If one stall's payment terminal is not working, another may be fine. Walk to the next charger and try your payment method again.

Kia EV9 Charging Slower Than Expected at DC or AC

The EV9 is Kia's largest electric SUV, with a 96 kWh battery and 800V architecture that supports up to 233 kW DC charging. When you see 60 kW on the charger screen instead of 200+, it does not match what the specs promise. In most cases, slow charging on the EV9 comes down to battery temperature, the charger's actual voltage and output, or a car setting worth checking.

Symptoms

• DC fast charging speed well below the 233 kW maximum
• AC charging stuck at 3-4 kW instead of the full 11 kW
• Charging speed drops sharply above 60-70% state of charge
• Session starts at low power and never ramps up
• Panoramic display shows much lower power than the charger's rated output

What to Do

1. 1

   Check the battery temperature

   Look at the EV information on the panoramic display. If the battery is cold, use the built-in navigation to set a charging destination. The EV9 will precondition the battery automatically on the way. This is especially important in winter given the large battery.

2. 2

   Check whether the charger supports 800V

   Look at the charger specs on its screen or in the charging network's app. If it is a 400V charger, the EV9's multi-charging system handles the conversion, but you will not see 233 kW. Seek out chargers that explicitly list 800V support.

3. 3

   Check your state of charge

   If you are above 80%, the speed drop is normal. For road trips, plan stops to arrive between 10-20% and unplug at 80%. The EV9's consumption is around 204 Wh/km, so factor that into your stop planning.

4. 4

   Review scheduled charging and charge limits

   On the EV settings screen or in the Kia Connect app, check that scheduled charging is not delaying the session and the charge current limit is at maximum.

5. 5

   Check if the charger is sharing power

   Look at the charger cabinet. If two cables come from the same unit and someone is on the other cable, your speed may be halved. Move to an unoccupied charger if one is available.

6. 6

   Try a different charger or station

   If speed is still low after checking everything, the charger may be underperforming its rated output. Try another stall or head to a different station.

App-only payment with no backup option at the charger

Badenova chargers require the Badenova app to start a session. There is no contactless card reader on the charger and no RFID option. If the app is not working, you cannot charge.

Symptoms

• The charger has no contactless payment terminal or RFID reader
• You do not have the Badenova app installed and cannot download it at the station
• The app will not load or crashes when trying to start a session
• You have no mobile data signal at the station and cannot use the app

How to Fix It

1. 1

   Install and set up the Badenova app before you need it

   Download the Badenova app and create an account with a valid payment method before your first visit. Trying to set up an account at the station, possibly with poor signal, is a frustrating experience you can avoid.

2. 2

   Try connecting to Wi-Fi if your mobile data is weak

   Some Badenova stations or nearby businesses may offer Wi-Fi. If your mobile data is too weak to load the app, look for available networks. Even a slow connection is enough to start a session.

3. 3

   Restart the app or your phone

   If the app crashes or freezes, close it completely and reopen it. If that does not help, restart your phone. App-only chargers depend entirely on your phone working, so basic troubleshooting matters.

4. 4

   Drive to an alternative charger with contactless payment

   If the app is genuinely broken or you have no signal, you need a charger that accepts contactless payment or RFID. Check another charging app (Ionity, EnBW mobility+, or a roaming app) for the nearest alternative station. This is the downside of app-only networks: no app, no charge.

5. 5

   Check if a roaming app supports Badenova stations

   Some roaming platforms (like EnBW mobility+ or Maingau) may include Badenova stations. If you already have a roaming app installed, search for the station there. You can sometimes start a session through a roaming app when the native app is not cooperating.

Regional coverage limited to southwestern Germany

Badenova's network is concentrated in the Baden-Württemberg region, especially around Freiburg, the Upper Rhine area, and surrounding towns. Outside this region, you will not find Badenova chargers.

Symptoms

• The Badenova app shows no stations outside the Freiburg/Baden region
• You assumed Badenova coverage would extend along the Autobahn but it does not
• The nearest Badenova station is 100 km or more from your destination
• You are driving through Germany and planned stops based on Badenova but ran into coverage gaps

How to Fix It

1. 1

   Check Badenova coverage before planning your route

   Open the Badenova app and look at the station map. You will see that coverage is regional, not national. If your trip extends beyond southwestern Germany, you need additional networks.

2. 2

   Install apps for national German networks

   For travel across Germany, install EnBW mobility+ (large national network), Ionity (Autobahn-focused), or Fastned. These networks have stations along major highways throughout the country.

3. 3

   Use a roaming app for multi-network access

   EnBW mobility+ and Maingau EinfachStromLaden work as roaming apps that access chargers from dozens of operators. One app covers you across Germany instead of installing a separate app for each regional operator.

4. 4

   Plan with a multi-network route planner for longer trips

   A Better Routeplanner (ABRP) shows chargers from all operators. Enter your vehicle model and destination to get optimized stops. Badenova stations will appear where they exist, and other networks fill the gaps.

App interface in German only

The Badenova app is designed for the German market and the interface is in German. If German is not your language, navigating the app takes extra effort.

Symptoms

• All app menus and buttons are in German
• Error messages from the charger (shown in the app) are in German
• You cannot find the 'start session' button because labels are in German
• Account setup and payment forms are in German

How to Fix It

1. 1

   Learn the key German charging terms

   'Laden starten' means start charging. 'Laden beenden' means stop charging. 'Verfügbar' means available. 'Besetzt' means occupied. 'Außer Betrieb' means out of order. 'Bezahlung' means payment. These cover most of what you need.

2. 2

   Set up your account at home with a translation tool open

   Create your Badenova account and add your payment method at home where you can take your time. Use Google Translate or a similar tool to translate the forms. You only need to do this once.

3. 3

   Use your phone's built-in app translation

   On Android, the system can translate app interfaces into your language. On iOS, you can screenshot any page and use the built-in translation feature. This helps with settings you do not visit often.

4. 4

   Memorize the session flow

   The flow is the same every time: open app, find station on map, select charger, tap start. Once you know the sequence, the German labels are less of a barrier. Practice at home before your first real session.

Stations at company premises with limited access hours

Some Badenova chargers are installed at business locations or company parking areas that have restricted access during evenings, weekends, or holidays.

Symptoms

• You arrived at a station and the parking area is gated or locked
• The charger is accessible during business hours but not when you need it
• The app shows the station as available but you physically cannot reach it
• Weekend or holiday access is restricted

How to Fix It

1. 1

   Check the station details in the app for access hours

   Some Badenova stations list opening hours or access restrictions in the station details. Before driving there, look for notes about access times, especially if you plan to charge in the evening, early morning, or on weekends.

2. 2

   Look for a gate code or intercom

   Some company premises with public chargers provide a gate code or intercom button for EV drivers. Check the station listing in the app or look for instructions near the gate entrance.

3. 3

   Drive to a publicly accessible alternative

   If the station is behind a locked gate, your only option is to find another charger. Check the Badenova app or a roaming app for the next nearest station that is on a public road or in a publicly accessible parking area.

4. 4

   Prefer stations at public locations when planning ahead

   For reliability, prioritize Badenova stations that are on public streets or at commercial locations (supermarkets, public parking garages). These are accessible 24/7 regardless of business hours.

Fewer fallback stations when a charger is broken

Badenova is a smaller regional network. If the charger you planned to use is out of order, the next Badenova station may be far away. Larger networks offer more alternatives within a short drive.

Symptoms

• You arrived and the charger shows 'Außer Betrieb' (out of order)
• The next Badenova station is 20 km or more away
• You do not have another charging app installed
• Your battery is low and you need to charge now

How to Fix It

1. 1

   Check for other Badenova stations nearby

   Open the Badenova app and look at the map for alternative stations in the area. Even in their core region, stations may be spaced 10 to 30 km apart.

2. 2

   Search for chargers from other operators

   Open a roaming app (EnBW mobility+, Maingau, or Chargemap) and search for any available fast charger nearby, regardless of operator. In Baden-Württemberg, EnBW has good coverage that often fills Badenova's gaps.

3. 3

   Look for AC chargers as a last resort

   If no DC fast charger is available, an AC charger at a hotel, parking garage, or public lot can add enough range to reach the next working fast charger. It is slower, but it keeps you moving.

4. 4

   Report the broken charger in the Badenova app

   Let Badenova know the charger is out of order. Smaller networks depend on user reports to dispatch maintenance. Your report helps the next driver.

5. 5

   Always have a backup network app installed

   With any smaller regional network, carry at least one additional charging app (like EnBW mobility+ or Ionity) as insurance. Setting this up takes five minutes and saves you from being stranded.