Kia EV3 Charging at Atlante

Kia EV3 Charger Won't Start: Troubleshooting Steps

You have plugged in your Kia EV3, but the charger is not starting. No power, no progress bar, just silence. This is one of the most common problems at public charging stations, and it usually has a simple fix.

Symptoms

• The charger display stays on 'connect vehicle' or 'waiting' after plugging in
• The infotainment display does not show any charging activity
• The EV3's charge port light does not illuminate or blinks without starting
• The charger shows an error code immediately after connection
• The CCS2 connector feels loose in the port

What to Do

1. 1

   Unlock the car and open the charge port

   Make sure the EV3 is unlocked. Press the charge port door to open it fully. The port is typically on the rear of the car.

2. 2

   Push the connector in firmly

   Insert the CCS2 or Type 2 connector straight into the port until it clicks and locks. Do not angle it. A solid connection triggers the handshake protocol.

3. 3

   Start the session at the charger

   Tap your RFID card, open the charging network app, or use contactless payment. The charger needs authentication before delivering power to your EV3.

4. 4

   Check EV settings on the infotainment display

   Look for any scheduled charging settings or charge limits that might prevent immediate charging. Disable any schedules if you want to charge now.

5. 5

   Unplug and reconnect

   Remove the cable, wait 10 seconds, and plug in again. This resets the communication between the EV3 and the charger.

6. 6

   Try a different charger

   If the issue persists, the charger is likely faulty. Move to another stall or a different station. Report the broken charger in the network's app.

Kia EV3 Charging Payment Rejected: How to Fix Fast

Your Kia EV3 is plugged in, but the charger will not accept your payment. The RFID card is ignored, the app shows an error, or your bank card is declined. This is not an EV3 issue, but it still keeps you from charging. Here is how to resolve it.

Symptoms

• The charger displays 'payment declined' or 'authentication failed'
• Your RFID card gets no response when tapped on the reader
• The charging app shows a payment error when starting a session
• Contactless bank card payment is rejected at the charger terminal
• The charger asks for payment but you cannot find a method that works

What to Do

1. 1

   Try a different payment method

   If your RFID card fails, switch to the charging app. If the app fails, try a contactless bank card. Most European chargers support at least two payment options.

2. 2

   Check your account and payment details

   Open the charging app and verify your payment method is current. For prepaid accounts, check your balance. For subscription services, confirm your plan is active.

3. 3

   Look for supported networks on the charger

   Check the charger for logos of accepted providers (Ionity, Shell Recharge, Allego, etc.). If your provider is not listed, you will need ad-hoc payment.

4. 4

   Scan the QR code for ad-hoc payment

   Most European chargers now have a QR code. Scan it with your phone to open a web-based payment page where you can pay with any bank card, no app required.

5. 5

   Cancel and retry the session

   If payment appeared to work but charging did not start, cancel the session in the app and try again. A fresh authorization often resolves the issue.

6. 6

   Call the network support number

   The charger should display a support phone number. The operator can sometimes start a session remotely or identify the specific payment problem.

Kia EV3 Long Range Charging Slow: Causes and Fixes

You expected your Kia EV3 Long Range to charge quickly, but the power on the infotainment display is much lower than 135kW. On a trip where every minute counts, this is frustrating. The good news is that most causes of slow charging are avoidable once you understand what affects speed.

Symptoms

• DC charging power shown on the infotainment display is well below 135kW
• Estimated charge time for the 78kWh battery is much longer than expected
• Charging speed drops significantly above 70% state of charge
• AC home or destination charging is stuck below 11kW
• The infotainment display shows a battery temperature or preconditioning message

What to Do

1. 1

   Check charging power on the infotainment display

   The EV3's infotainment screen shows current kW, battery percentage, and estimated time. Compare the kW figure to the charger's rated output to determine the bottleneck.

2. 2

   Activate battery preconditioning

   Set the charging station as your destination in the EV3's navigation system. The car will automatically warm the battery to optimal temperature while driving, significantly improving initial DC charging speed.

3. 3

   Verify the charger's maximum output

   Check the label on the charger unit or the network app for the station's rated power. A 50kW charger cannot deliver 135kW regardless of your car's capability.

4. 4

   Avoid shared stalls

   At stations with paired CCS2 connectors, choose a pair where the other stall is free. This gives your EV3 access to the full power output.

5. 5

   Charge between 10% and 80%

   Plan your stops to arrive low and leave at 80%. This keeps you in the fastest charging range and saves time compared to topping up to 100%.

6. 6

   Update the car's software

   Kia periodically releases updates that improve charging performance. Check the infotainment display for available software updates or visit your Kia service centre.

New station with teething problems

Atlante is expanding rapidly, and many stations are brand new. Newly installed chargers sometimes have firmware bugs, incomplete network configuration, or hardware that has not been fully tested under real-world conditions.

Symptoms

• Charger turns on but fails to communicate with your vehicle
• Session starts but drops after a few seconds
• Charger screen shows an error code you have never seen before
• Station appears on the map but the chargers are not yet operational

How to Fix It

1. 1

   Try a different charger at the same station

   New stations often have multiple units and the issue may be limited to one charger. Try another unit before giving up on the location.

2. 2

   Unplug, wait 30 seconds, and retry

   New charger firmware sometimes fails on the first handshake but succeeds on the second attempt. A short wait lets the charger reset its session state.

3. 3

   Start the session through the Atlante app

   If the charger's screen or contactless reader is not working properly, the app provides a separate communication path to the charger's backend. This can bypass local hardware issues.

4. 4

   Check the Atlante app for station status notes

   Atlante sometimes posts notices about newly activated stations that are still in testing. The station detail page in the app may show a note about limited functionality.

5. 5

   Report the issue and move to the next station

   Use the Atlante app to report the problem. New station issues are usually fixed quickly once reported. Check the app for the nearest alternative Atlante or competitor station.

App crashes on older phones

The Atlante app can be unstable on older phones or phones running outdated operating systems. The app may crash during login, while loading the map, or in the middle of starting a session.

Symptoms

• App closes unexpectedly when you open the station map
• App freezes during the payment screen
• Login screen loads but the app crashes after entering credentials
• App works briefly but crashes when you try to start a session

How to Fix It

1. 1

   Update the Atlante app to the latest version

   Atlante pushes frequent updates that fix stability issues. Open the App Store or Google Play and check for updates before your trip.

2. 2

   Clear the app cache

   On Android, go to Settings, Apps, Atlante, and clear the cache. On iPhone, delete and reinstall the app. Corrupted cache data is a common cause of crashes.

3. 3

   Check your phone's operating system version

   The Atlante app may require iOS 15+ or Android 10+. If your phone is on an older version, update if possible. If your phone cannot update, you may need a roaming app as a backup.

4. 4

   Use contactless payment as a fallback

   If the app keeps crashing and the station supports contactless, tap your credit or debit card on the charger's payment terminal. Not all Atlante stations have this yet, but it completely bypasses the app.

5. 5

   Try a roaming app

   Apps like Chargemap, Shell Recharge, or Electropass can start sessions at Atlante stations without using the Atlante app. Check roaming coverage before relying on this.

Contactless payment terminal not activated

Atlante is rolling out contactless card payment across its network, but not every charger has an active terminal yet. Some units have the hardware installed but the payment function is not turned on.

Symptoms

• Card reader is visible on the charger but does not respond to a tap
• Screen says 'Use app to start' with no contactless option shown
• Contactless symbol is printed on the charger but the reader light is off
• You see a payment terminal but tapping produces no response

How to Fix It

1. 1

   Download and use the Atlante app

   At stations where contactless is not yet active, the Atlante app is the primary payment method. Download it before your trip and add a payment card in advance.

2. 2

   Check the charger screen for payment instructions

   Some Atlante chargers display which payment methods are currently available. If contactless is not listed, the terminal is not active at that unit.

3. 3

   Try a different charger at the same station

   Contactless activation sometimes rolls out unit by unit. Another charger at the same station may have an active terminal.

4. 4

   Use a roaming RFID card or app

   If you have an RFID card from a roaming provider, try tapping it. Some Atlante stations accept roaming RFID even when the contactless card terminal is not active.

Charger screen hard to read in direct sunlight

Some Atlante charger screens have low brightness levels that make them nearly impossible to read in bright sunlight. This is especially common at stations in Southern Europe during summer.

Symptoms

• Screen content is barely visible outdoors during the day
• You cannot read the price, status, or error messages on the screen
• Screen appears to be off but the charger is actually on
• You have to cup your hands around the screen to read it

How to Fix It

1. 1

   Use your body or hand to shade the screen

   Stand to block direct sunlight from hitting the screen. Even partial shade can make the display readable.

2. 2

   Take a photo of the screen with your phone

   Your phone camera can sometimes capture what your eyes cannot. Take a photo and zoom in to read the text.

3. 3

   Use the Atlante app to monitor your session

   All session information (charging speed, energy delivered, cost, estimated time) is available in the app. You do not need the charger screen to track your session.

4. 4

   Start the session entirely through the app

   If you cannot read the screen at all, use the Atlante app to select the charger, start the session, and stop it when done. This avoids needing to interact with the screen.

Cable connector requires specific angle to lock

Some Atlante charger cables need to be inserted at a particular angle or with extra force for the CCS2 connector to seat properly. If it is not fully locked, the session will not start.

Symptoms

• Connector feels like it is in but the charger does not recognize it
• Charger screen says 'Connect cable' even though the cable is plugged in
• You hear a partial click but the connector is not locked
• Connector slides back out after you let go

How to Fix It

1. 1

   Push the connector straight in, then slightly upward

   Some Atlante CCS2 connectors need a slight upward tilt after the initial push to engage the locking mechanism. You should feel and hear a solid click.

2. 2

   Check for debris in the vehicle's charging port

   Dust, ice, or a small pebble in the port can prevent the connector from seating fully. Inspect the port and brush out anything you find.

3. 3

   Make sure the vehicle is unlocked and ready to charge

   Some vehicles lock the charging port flap or disable the inlet when the car is locked or in drive mode. Ensure the car is in park and unlocked.

4. 4

   Try a different cable if the charger has two

   If the charger has two CCS2 cables, try the other one. One cable may have a slightly worn connector that does not seat as easily.