Kia EV3 Charging at Allego

Kia EV3 Charger Won't Start: Troubleshooting Steps

You have plugged in your Kia EV3, but the charger is not starting. No power, no progress bar, just silence. This is one of the most common problems at public charging stations, and it usually has a simple fix.

Symptoms

• The charger display stays on 'connect vehicle' or 'waiting' after plugging in
• The infotainment display does not show any charging activity
• The EV3's charge port light does not illuminate or blinks without starting
• The charger shows an error code immediately after connection
• The CCS2 connector feels loose in the port

What to Do

1. 1

   Unlock the car and open the charge port

   Make sure the EV3 is unlocked. Press the charge port door to open it fully. The port is typically on the rear of the car.

2. 2

   Push the connector in firmly

   Insert the CCS2 or Type 2 connector straight into the port until it clicks and locks. Do not angle it. A solid connection triggers the handshake protocol.

3. 3

   Start the session at the charger

   Tap your RFID card, open the charging network app, or use contactless payment. The charger needs authentication before delivering power to your EV3.

4. 4

   Check EV settings on the infotainment display

   Look for any scheduled charging settings or charge limits that might prevent immediate charging. Disable any schedules if you want to charge now.

5. 5

   Unplug and reconnect

   Remove the cable, wait 10 seconds, and plug in again. This resets the communication between the EV3 and the charger.

6. 6

   Try a different charger

   If the issue persists, the charger is likely faulty. Move to another stall or a different station. Report the broken charger in the network's app.

Kia EV3 Charging Payment Rejected: How to Fix Fast

Your Kia EV3 is plugged in, but the charger will not accept your payment. The RFID card is ignored, the app shows an error, or your bank card is declined. This is not an EV3 issue, but it still keeps you from charging. Here is how to resolve it.

Symptoms

• The charger displays 'payment declined' or 'authentication failed'
• Your RFID card gets no response when tapped on the reader
• The charging app shows a payment error when starting a session
• Contactless bank card payment is rejected at the charger terminal
• The charger asks for payment but you cannot find a method that works

What to Do

1. 1

   Try a different payment method

   If your RFID card fails, switch to the charging app. If the app fails, try a contactless bank card. Most European chargers support at least two payment options.

2. 2

   Check your account and payment details

   Open the charging app and verify your payment method is current. For prepaid accounts, check your balance. For subscription services, confirm your plan is active.

3. 3

   Look for supported networks on the charger

   Check the charger for logos of accepted providers (Ionity, Shell Recharge, Allego, etc.). If your provider is not listed, you will need ad-hoc payment.

4. 4

   Scan the QR code for ad-hoc payment

   Most European chargers now have a QR code. Scan it with your phone to open a web-based payment page where you can pay with any bank card, no app required.

5. 5

   Cancel and retry the session

   If payment appeared to work but charging did not start, cancel the session in the app and try again. A fresh authorization often resolves the issue.

6. 6

   Call the network support number

   The charger should display a support phone number. The operator can sometimes start a session remotely or identify the specific payment problem.

Kia EV3 Long Range Charging Slow: Causes and Fixes

You expected your Kia EV3 Long Range to charge quickly, but the power on the infotainment display is much lower than 135kW. On a trip where every minute counts, this is frustrating. The good news is that most causes of slow charging are avoidable once you understand what affects speed.

Symptoms

• DC charging power shown on the infotainment display is well below 135kW
• Estimated charge time for the 78kWh battery is much longer than expected
• Charging speed drops significantly above 70% state of charge
• AC home or destination charging is stuck below 11kW
• The infotainment display shows a battery temperature or preconditioning message

What to Do

1. 1

   Check charging power on the infotainment display

   The EV3's infotainment screen shows current kW, battery percentage, and estimated time. Compare the kW figure to the charger's rated output to determine the bottleneck.

2. 2

   Activate battery preconditioning

   Set the charging station as your destination in the EV3's navigation system. The car will automatically warm the battery to optimal temperature while driving, significantly improving initial DC charging speed.

3. 3

   Verify the charger's maximum output

   Check the label on the charger unit or the network app for the station's rated power. A 50kW charger cannot deliver 135kW regardless of your car's capability.

4. 4

   Avoid shared stalls

   At stations with paired CCS2 connectors, choose a pair where the other stall is free. This gives your EV3 access to the full power output.

5. 5

   Charge between 10% and 80%

   Plan your stops to arrive low and leave at 80%. This keeps you in the fastest charging range and saves time compared to topping up to 100%.

6. 6

   Update the car's software

   Kia periodically releases updates that improve charging performance. Check the infotainment display for available software updates or visit your Kia service centre.

Allego app not starting a session

You open the Allego app, select the charger, tap 'Start,' and nothing happens. The app may spin, show an error, or claim the charger is offline even though the screen in front of you says otherwise.

Symptoms

• Allego app shows a loading spinner that never finishes
• 'Charger unavailable' in the app but the physical charger looks operational
• App crashes when tapping 'Start Charging'
• Session appears to start in the app but the charger does not begin delivering power

How to Fix It

1. 1

   Make sure you selected the correct charger and connector

   Allego stations often have multiple charging points. Each one has its own ID, usually printed on a sticker near the connector. Match this ID to the one shown in the Allego app. Selecting the wrong point is the most common reason a session will not start.

2. 2

   Plug in the cable before starting the session in the app

   Most Allego chargers require the cable to be connected to your car first. The charger needs to detect a vehicle before it will accept a start command from the app.

3. 3

   Close and reopen the Allego app

   Force-close the app completely (swipe it away from your recent apps), wait a few seconds, and reopen it. Try starting the session again.

4. 4

   Scan the QR code on the charger instead

   Most Allego chargers have a QR code that opens a web-based payment page. This works independently of the Allego app and lets you pay with a credit card without needing an account.

5. 5

   Use an RFID card from a roaming provider

   If you have an RFID card from a provider like Shell Recharge, Plugsurfing, or Chargemap, hold it against the reader on the charger. This bypasses the Allego app entirely.

Charger not appearing in the Allego app

You are standing in front of a physical Allego charger, but it does not show up on the Allego app map. The charger is clearly operational and other drivers are using it.

Symptoms

• Charger location is missing from the the Allego app map entirely
• App shows the location but with zero available connectors
• Charger appears under a different brand name in other apps but not in the Allego app
• Newly installed charger not yet listed

How to Fix It

1. 1

   Check if the charger is operated under a different brand

   Allego operates under various local labels in different countries. The charger might be listed under the local brand name rather than 'Allego' in some apps. Look for a sticker or sign on the charger that shows the operator name and EVSE ID.

2. 2

   Search by charger ID instead of location

   In the Allego app, try the search function and enter the charger's EVSE ID (printed on the unit, usually starting with a country code like DE*, NL*, or FR*). This can find chargers that are not correctly placed on the map.

3. 3

   Use the QR code on the charger

   Scan the QR code on the charger with your phone camera. This will open a direct link to start a session, even if the charger is missing from the app map.

4. 4

   Try a different charging app

   Allego chargers are accessible through many roaming providers. Open an app like Chargemap, Shell Recharge, or Plugsurfing and search for the same location. You may be able to start the session there.

Third-party RFID card not accepted

You hold your RFID card from another provider against the reader and the charger beeps but rejects it, or nothing happens at all.

Symptoms

• Charger beeps once but displays 'Card not recognized'
• No reaction when holding the RFID card to the reader
• Card works at other networks but not at this Allego charger
• 'Authorization failed' message on the charger screen

How to Fix It

1. 1

   Check if your roaming provider covers Allego

   Not all RFID providers have roaming agreements with Allego. Check your provider's app or website to confirm Allego is listed in their coverage. Some providers cover only certain Allego locations.

2. 2

   Hold the card flat and steady for 3 seconds

   Do not wave or tap the card. Place it flat against the reader and hold it still. Allego readers can be slower to respond than some other networks.

3. 3

   Try a different position on the reader

   The RFID antenna inside the reader has a specific sweet spot. Move your card slowly across the reader surface until you get a response. On some Allego chargers, the reader is on the right side panel rather than the front.

4. 4

   Check your RFID card is activated

   Some providers require you to activate your RFID card in their app before first use. Open your provider's app and look for card activation or card management settings.

5. 5

   Fall back to QR code or Allego app

   If your RFID card will not work, scan the QR code on the charger for direct credit card payment, or download the Allego app and register to start the session digitally.

Long delay before charging actually starts

You have authenticated and the charger says it is starting, but 30 seconds, sometimes over a minute, passes before any power flows to your car.

Symptoms

• Charger screen says 'Starting' or 'Initializing' for over 30 seconds
• Car shows 'Waiting for charger' or 'Preparing'
• Power reading stays at 0 kW for a full minute after authentication
• You wonder if you should unplug and try again

How to Fix It

1. 1

   Wait at least 90 seconds before taking action

   Allego high-power chargers perform a communication handshake with your car before delivering power. This includes safety checks, voltage negotiation, and isolation testing. A 30-60 second delay is normal, especially on 350 kW units.

2. 2

   Do not unplug during the initialization phase

   Unplugging and re-plugging resets the entire handshake process. If the charger screen shows any progress (status messages, icons changing), let it complete.

3. 3

   Check if your car's charge port is locked

   The connector should be locked into your car's charge port during initialization. If you can wiggle the connector freely, it may not be fully inserted. Push it in firmly and listen for the lock click.

4. 4

   If nothing happens after 2 minutes, restart the session

   Unplug the connector, wait 10 seconds, plug it back in, and authenticate again. If the delay repeats, try a different connector or charger at the same station.

Charging power much lower than advertised

The charger is rated for 350 kW, but your car is only pulling 50 kW or less. The session is working, just far slower than expected.

Symptoms

• Car or charger display shows 40-80 kW on a 350 kW charger
• Estimated charge time is much longer than expected
• Power started high but dropped dramatically within minutes
• Other cars at the same station seem to charge faster

How to Fix It

1. 1

   Check your battery level

   DC charging slows significantly above 60-70% state of charge on most cars. If your battery is already at 65% or higher, the reduced speed is your car protecting its battery, not a charger problem.

2. 2

   Check your car's maximum DC charging rate

   A 350 kW charger can deliver up to 350 kW, but your car decides how much to accept. Many EVs top out at 100-150 kW. Check your car's specifications for its maximum DC charging speed.

3. 3

   Consider battery temperature

   Cold batteries charge slowly. If you have been parked for hours in cold weather without preconditioning, your car may limit charging to 30-60 kW until the battery warms up. Some cars let you precondition the battery by setting the charger as your navigation destination.

4. 4

   Check if the station is power-sharing

   Some Allego stations share power between multiple chargers. If three cars are charging simultaneously, each one may get less than the maximum. This is normal at shared-power sites.

5. 5

   Try a different connector at the same station

   Occasionally one connector delivers less power due to a hardware limitation. If you are getting unusually low power even at a low battery level, unplug and try the next unit.