Kia EV3 Charging at ABC-lataus

Kia EV3 Charger Won't Start: Troubleshooting Steps

You have plugged in your Kia EV3, but the charger is not starting. No power, no progress bar, just silence. This is one of the most common problems at public charging stations, and it usually has a simple fix.

Symptoms

• The charger display stays on 'connect vehicle' or 'waiting' after plugging in
• The infotainment display does not show any charging activity
• The EV3's charge port light does not illuminate or blinks without starting
• The charger shows an error code immediately after connection
• The CCS2 connector feels loose in the port

What to Do

1. 1

   Unlock the car and open the charge port

   Make sure the EV3 is unlocked. Press the charge port door to open it fully. The port is typically on the rear of the car.

2. 2

   Push the connector in firmly

   Insert the CCS2 or Type 2 connector straight into the port until it clicks and locks. Do not angle it. A solid connection triggers the handshake protocol.

3. 3

   Start the session at the charger

   Tap your RFID card, open the charging network app, or use contactless payment. The charger needs authentication before delivering power to your EV3.

4. 4

   Check EV settings on the infotainment display

   Look for any scheduled charging settings or charge limits that might prevent immediate charging. Disable any schedules if you want to charge now.

5. 5

   Unplug and reconnect

   Remove the cable, wait 10 seconds, and plug in again. This resets the communication between the EV3 and the charger.

6. 6

   Try a different charger

   If the issue persists, the charger is likely faulty. Move to another stall or a different station. Report the broken charger in the network's app.

Kia EV3 Charging Payment Rejected: How to Fix Fast

Your Kia EV3 is plugged in, but the charger will not accept your payment. The RFID card is ignored, the app shows an error, or your bank card is declined. This is not an EV3 issue, but it still keeps you from charging. Here is how to resolve it.

Symptoms

• The charger displays 'payment declined' or 'authentication failed'
• Your RFID card gets no response when tapped on the reader
• The charging app shows a payment error when starting a session
• Contactless bank card payment is rejected at the charger terminal
• The charger asks for payment but you cannot find a method that works

What to Do

1. 1

   Try a different payment method

   If your RFID card fails, switch to the charging app. If the app fails, try a contactless bank card. Most European chargers support at least two payment options.

2. 2

   Check your account and payment details

   Open the charging app and verify your payment method is current. For prepaid accounts, check your balance. For subscription services, confirm your plan is active.

3. 3

   Look for supported networks on the charger

   Check the charger for logos of accepted providers (Ionity, Shell Recharge, Allego, etc.). If your provider is not listed, you will need ad-hoc payment.

4. 4

   Scan the QR code for ad-hoc payment

   Most European chargers now have a QR code. Scan it with your phone to open a web-based payment page where you can pay with any bank card, no app required.

5. 5

   Cancel and retry the session

   If payment appeared to work but charging did not start, cancel the session in the app and try again. A fresh authorization often resolves the issue.

6. 6

   Call the network support number

   The charger should display a support phone number. The operator can sometimes start a session remotely or identify the specific payment problem.

Kia EV3 Long Range Charging Slow: Causes and Fixes

You expected your Kia EV3 Long Range to charge quickly, but the power on the infotainment display is much lower than 135kW. On a trip where every minute counts, this is frustrating. The good news is that most causes of slow charging are avoidable once you understand what affects speed.

Symptoms

• DC charging power shown on the infotainment display is well below 135kW
• Estimated charge time for the 78kWh battery is much longer than expected
• Charging speed drops significantly above 70% state of charge
• AC home or destination charging is stuck below 11kW
• The infotainment display shows a battery temperature or preconditioning message

What to Do

1. 1

   Check charging power on the infotainment display

   The EV3's infotainment screen shows current kW, battery percentage, and estimated time. Compare the kW figure to the charger's rated output to determine the bottleneck.

2. 2

   Activate battery preconditioning

   Set the charging station as your destination in the EV3's navigation system. The car will automatically warm the battery to optimal temperature while driving, significantly improving initial DC charging speed.

3. 3

   Verify the charger's maximum output

   Check the label on the charger unit or the network app for the station's rated power. A 50kW charger cannot deliver 135kW regardless of your car's capability.

4. 4

   Avoid shared stalls

   At stations with paired CCS2 connectors, choose a pair where the other stall is free. This gives your EV3 access to the full power output.

5. 5

   Charge between 10% and 80%

   Plan your stops to arrive low and leave at 80%. This keeps you in the fastest charging range and saves time compared to topping up to 100%.

6. 6

   Update the car's software

   Kia periodically releases updates that improve charging performance. Check the infotainment display for available software updates or visit your Kia service centre.

Session fails to start or charger shows an error

You plug in and try to authenticate, but the charger does not begin charging. This can happen due to communication issues between your vehicle and the charger, or a problem with authentication.

Symptoms

• Charger shows an error after you try to start a session
• Contactless card payment does not work at this station (older unit without payment terminal)
• Card reader beeps but the session does not start
• The app says the session is starting but nothing happens at the charger

How to Fix It

1. 1

   Unplug, wait 30 seconds, and try again

   The initial communication handshake between your vehicle and the charger can fail. Unplug the connector, wait at least 30 seconds, and reconnect. The second attempt often works.

2. 2

   Try starting the session through the ABC-lataus app

   If the card reader is not cooperating, open the ABC-lataus app, select the station, and start the session from your phone. This bypasses the physical card reader entirely.

3. 3

   Try contactless card payment at newer stations

   Some newer ABC-lataus high-power stations have a contactless payment terminal. If the app is not cooperating, look for a card reader on the charger unit and tap your bank card. Older stations may not have this option.

4. 4

   Try a different charger unit at the same station

   If the station has multiple charger units, switch to another one. One unit may have a hardware issue while the others work fine.

Finding the EV charger at a busy fuel station

ABC-lataus chargers are located at ABC fuel stations, which also serve diesel and petrol vehicles. The EV charging spots can be easy to miss if you are visiting for the first time.

Symptoms

• You arrived at the ABC station but cannot see the EV charger
• The charger is behind the fuel pump area or in a separate parking section
• Other vehicles (non-EV) are parked in the charging spots
• Signage is not visible from the main road entrance

How to Fix It

1. 1

   Check the ABC-lataus app for the charger's exact location

   The app shows station details including photos or layout hints. Some ABC stations place chargers at the far end of the parking area, away from the fuel pumps.

2. 2

   Look for the CCS2 cable and charging unit

   The charger unit is taller than a fuel pump and usually has a clearly different design. Look for a separate bay with a CCS2 cable, often marked with green signage or an EV symbol on the ground.

3. 3

   Drive past the fuel pumps

   At many ABC stations, the EV charger is positioned after the fuel pump area or in a dedicated corner of the parking lot. Do not stop at the fuel pumps. Continue through and scan for the charging unit.

4. 4

   If an ICE vehicle is blocking the spot, report it

   ABC stations serve all types of vehicles. If a non-EV is parked in the charging bay, contact ABC customer service through the app. Unfortunately, there is not much you can do in the moment besides trying another station.

App setup confusion within the S-Group ecosystem

The ABC-lataus app is part of the S-Group digital ecosystem. If you already use S-mobiili for groceries or fuel, the relationship between the apps can be confusing.

Symptoms

• You are not sure whether to use S-mobiili or the ABC-lataus app
• Your S-Group login works in one app but not the other
• Charging payments do not appear in your S-mobiili transaction history
• You created a new account instead of linking your existing S-Group membership

How to Fix It

1. 1

   Use the ABC-lataus app for starting and managing charging sessions

   While S-mobiili handles your broader S-Group membership, the ABC-lataus app is the dedicated tool for finding stations, starting sessions, and viewing charging history. Install it separately from the App Store or Google Play.

2. 2

   Log in with your existing S-Group credentials

   Use the same username and password you use for S-mobiili or s-kanava.fi. Do not create a new account.

3. 3

   Check payment method settings in the ABC-lataus app

   Even if you have a payment card saved in S-mobiili, the ABC-lataus app may require you to add a payment method separately. Go to settings or payment in the ABC-lataus app and add your card there.

4. 4

   Verify your account is set up for charging

   Check the ABC-lataus app settings to make sure your payment method is saved and charging is enabled.

Connector stuck or difficult to insert in winter cold

Finnish winters mean temperatures well below freezing. The CCS2 connector locking mechanism and the vehicle's charge port can freeze, making it hard to plug in or unplug.

Symptoms

• The CCS2 connector will not click into your vehicle's charge port
• The connector is plugged in but the locking mechanism will not engage
• You cannot release the connector after charging is complete
• The connector handle feels stiff or the release button is frozen

How to Fix It

1. 1

   Check your vehicle's charge port for ice

   Open the charge port door and look for ice buildup around the opening or inside the port. Brush away any loose ice or snow with your hand or a soft brush. Do not use sharp tools, as you can damage the pins.

2. 2

   Warm the connector in your hands for a moment

   If the connector handle feels frozen stiff, hold it in your hands for 30 seconds to warm the mechanism slightly. The locking button and release lever work better when they are not frozen solid.

3. 3

   Push the connector in firmly and straight

   In cold weather, plastic contracts and tolerances get tighter. Line up the connector carefully and push it in with steady, even pressure. Do not force it at an angle.

4. 4

   If the connector is stuck after charging, try unlocking from your car

   Use your vehicle's unlock button or the in-car menu to release the charge port lock. Some vehicles also release the connector when you unlock the doors. If it is still stuck, wait a few minutes. The charging session generates heat that may free the mechanism.

5. 5

   Contact support if the connector will not release

   Do not yank the connector. Forcing it can damage both the cable and your vehicle's charge port. Call ABC-lataus support and they can guide you through a remote release or send help.

Charging session starts but power delivery is low

The charger is rated for 200 kW, but your session is delivering significantly less. Several factors specific to ABC-lataus stations can contribute.

Symptoms

• Dashboard shows 30 to 50 kW at a 200 kW rated charger
• Charging speed drops after a few minutes
• Speed is lower than what you get at other fast chargers
• The charger screen shows a lower maximum than 200 kW

How to Fix It

1. 1

   Check your vehicle's maximum DC charging rate

   A 200 kW charger does not mean your vehicle can accept 200 kW. Many EVs max out at 50 to 150 kW depending on the model, battery temperature, and state of charge. Check your vehicle's specifications.

2. 2

   Consider battery temperature in Finnish conditions

   Cold batteries accept less power. If your vehicle has been parked outside in freezing temperatures, the battery may need to warm up before it can accept higher charging speeds. Some vehicles have a preconditioning feature you can activate before arriving.

3. 3

   Check if another vehicle is sharing the station's power

   Some ABC-lataus locations share power between charger units. If another vehicle is charging at the same station, your available power may be split. This is normal and not a fault.

4. 4

   Arrive with a lower state of charge for faster charging

   Charging is fastest between 10% and 50% state of charge. If you arrive at 60% or higher, the charger will taper the power to protect your battery. This is your vehicle's doing, not the charger's.