Hyundai IONIQ 5 Charging at Lidl Charging

Hyundai IONIQ 5 Charger Will Not Start a Charging Session

You have plugged the cable into your IONIQ 5's charge port on the right rear fender, but nothing is happening. No power flowing, no charging animation on the cluster. This is frustrating, but it is rarely the car. Most failed charging starts come from the charger, the app, or a setting on the vehicle. Here is how to work through it.

Symptoms

• Charge port light does not turn on or blinks red after plugging in
• Charger screen shows an error or returns to the start screen immediately
• Charging app shows session failed or authentication error
• Cable is plugged in but the IONIQ 5 does not recognize the connection
• Charge port door will not open, especially in cold weather

What to Do

1. 1

   Open the charge port door

   Press the button on the charge port door on the right rear fender. If it will not open in cold weather, try pressing and holding the unlock button on your key fob, or gently warm the edges with your hands or lukewarm water. Do not force it open or use sharp tools.

2. 2

   Check for scheduled charging

   On the center touchscreen, go to EV settings and check if a charging schedule is active. You can also check in the Bluelink app under the charging section. Disable the schedule temporarily to charge immediately.

3. 3

   Unplug and reconnect the cable firmly

   Remove the cable completely, wait 10 seconds, and plug it back in. Push the CCS2 connector in until it clicks into the charge port. Make sure both the upper (AC) and lower (DC) sections are fully seated.

4. 4

   Re-authenticate at the charger

   Tap your RFID card again, restart the charging app, or try a different payment method. If the charger supports Plug and Charge and your IONIQ 5 has it enabled, try unplugging and replugging to re-trigger automatic authentication.

5. 5

   Try a different charger or stall

   If the session still will not start, the charger may be faulty. Move to a different stall at the same station. If all stalls fail, try a different charging station entirely.

6. 6

   Restart the car if needed

   In rare cases, the IONIQ 5's charging system needs a reset. Unplug the cable, sit in the car, press the start button to turn the car on, wait 30 seconds, turn it off, and try plugging in again.

Hyundai IONIQ 5 Charger Payment or Authentication Failed

You are at the charger, cable in hand, and the screen says payment failed or authentication error. Your IONIQ 5 is ready to charge, but the charger will not let you start. This is almost always a charger-side or app-side issue, not a car problem. Here is how to get charging.

Symptoms

• Charger screen shows payment declined or authentication error
• RFID card is not recognized when tapped on the reader
• Charging app shows session failed to start or payment error
• Contactless bank card is declined at the charger terminal
• Plug and Charge does not auto-authenticate after plugging in

What to Do

1. 1

   Check your charging app account

   Open your charging app and verify that your payment method is valid, your balance is sufficient (for prepaid accounts), and there is no stuck session from a previous charge. Update your payment method if the card on file has expired.

2. 2

   Try a different authentication method

   If your RFID card failed, try the app's QR code or start-via-app feature. If the app failed, try tapping your RFID card. If you have a contactless bank card, try that. Having at least two methods available saves time.

3. 3

   Check if Plug and Charge is enabled

   On the center touchscreen, go to EV settings and look for the Plug and Charge option. Make sure it is turned on. Then check if the charging network supports Plug and Charge. If both are set up, unplug the CCS2 cable and plug it back in to re-trigger authentication.

4. 4

   Restart the charger if possible

   Some chargers have a reset option on the screen or a physical button. If the charger seems stuck from a previous session, restarting it can clear the error. Check the charger screen for a reset or cancel option.

5. 5

   Move to a different charger

   If authentication keeps failing on one charger, try a different stall at the same station. Charger hardware varies even within the same location, and another unit may process your payment without issues.

6. 6

   Contact the charging network's support

   Most chargers display a phone number or support contact on the screen or on a sticker. Call or message the network's support to report the issue. They can sometimes remotely start a session or clear a stuck charger from their side.

Hyundai IONIQ 5 Charging Slower Than Expected at DC or AC

Your IONIQ 5 has one of the fastest charging architectures on the market. 800V, up to 233 kW, 10-80% in roughly 18 minutes. So when the screen shows 50 kW at a fast charger, something feels wrong. In most cases, slow charging on the IONIQ 5 is not a defect. It is usually the battery temperature, the charger's actual output, or a setting worth checking.

Symptoms

• DC fast charging speed well below the 233 kW maximum
• AC home or destination charging stuck at 3-4 kW instead of 11 kW
• Charging speed drops sharply after reaching 60-70%
• Charging session starts at low power and never ramps up
• Instrument cluster shows much lower power than the charger's rated output

What to Do

1. 1

   Check the battery temperature on the cluster

   Look at the charging information on your 12.3-inch instrument cluster or center touchscreen. If the battery temperature is low, consider driving for 15-20 minutes before your next charging stop, or use the built-in navigation to trigger battery preconditioning automatically.

2. 2

   Confirm the charger supports 800V

   Check the charger's specifications on its screen or the charging network's app. If it is a 400V charger, the IONIQ 5's multi-charging system will still work, but speeds will be lower than on an 800V unit. No adapter needed.

3. 3

   Check your state of charge

   If you are above 80%, the slowdown is expected. For the fastest road trip charging, plan stops so you arrive between 10-20% and unplug at 80%.

4. 4

   Check scheduled charging and charge limits

   Open the EV settings on the center touchscreen or in the Bluelink app. Make sure scheduled charging is not active (it can delay charging start) and the charge current limit is set to maximum.

5. 5

   Verify the charger is not sharing power

   Look at the charger unit. If two cables come from the same cabinet and someone is using the other one, you may be splitting power. Move to an unoccupied charger if available.

6. 6

   Try a different charger or station

   If the speed is still low after checking everything, the charger itself may be degraded or throttled. Try another stall at the same location, or head to a different station entirely.

Pricing confusion at the charger

Lidl charging policies vary by country and store. Some locations have promotional rates, while others charge standard per-kWh fees. The rules can change without much notice.

Symptoms

• Charging session costs more than expected
• Different Lidl stores seem to have different pricing
• Session stops after a time limit you did not expect
• App shows different terms than what you experienced last time

How to Fix It

1. 1

   Check the pricing terms at the specific store

   Pricing varies by location and country. Look at the signage near the charger or check the app before you start. Do not assume the same terms apply at all Lidl stores.

2. 2

   Set a timer on your phone

   If the location has a time limit, start a timer when you begin charging so you know when to return to your car.

3. 3

   Check if idle fees apply

   Some Lidl locations charge idle fees if your car remains plugged in after charging completes. Move your car promptly when the session ends.

4. 4

   Do not rely on supermarket chargers for a full charge

   Supermarket charging is best for a quick top-up while shopping. If you need to charge from low battery to 80%, plan for a dedicated fast charging station where you can stay longer without restrictions.

Charger occupied by ICE vehicles

Non-electric cars park in the EV charging spots because they are close to the store entrance. This is a persistent problem at supermarket locations.

Symptoms

• Petrol or diesel car parked in the marked EV charging bay
• Car parked so close to the charger that you cannot access the cable
• All EV spots taken by non-electric vehicles
• Shopping cart corral or delivery truck blocking access to the charger

How to Fix It

1. 1

   Check if the parking is enforced

   Some Lidl locations have clear EV-only signage with towing warnings. Others just have painted markings that are easy to ignore. If there is a parking management company sign, you can report the ICE vehicle.

2. 2

   Ask at the Lidl store

   Store staff may be willing to make an announcement. They deal with parking issues regularly and some stores have processes for this.

3. 3

   Wait or shop first

   Supermarket parking turns over quickly. A 20-minute shopping trip may be enough for the spot to clear.

4. 4

   Find the nearest alternative

   Check for another Lidl or a nearby public charger. In urban areas, there is often another option within a few minutes.

Charging power reduced during peak store hours

The charger delivers noticeably less power during busy shopping times. The station may share its electrical supply with the store itself, reducing available power for EV charging.

Symptoms

• Charging speed is significantly slower during Saturday morning or lunch rush
• Dashboard shows 30 to 50 kW at a charger rated for 150 kW
• Speed improves noticeably during quieter hours
• Two cars charging simultaneously both receive low power

How to Fix It

1. 1

   Check your battery level and temperature first

   Before blaming the charger, confirm your battery is not above 80% (where speed drops naturally) and not cold. These are the most common reasons for slow charging regardless of location.

2. 2

   Try charging during off-peak hours

   If your schedule allows, charge early morning or in the evening when the store is less busy. Power allocation to the charger may increase when store demand drops.

3. 3

   Check if another vehicle is sharing the power unit

   Some Lidl chargers share power between two connectors. If both are in use, each vehicle gets roughly half the rated power. If one car finishes, your speed may increase.

4. 4

   Accept the lower speed if you are shopping anyway

   Even at 50 kW, you gain about 50 km of range every 10 minutes. If you are shopping for 30 minutes, that is still a meaningful top-up.

App needed for troubleshooting but not normally required

Lidl chargers generally work with contactless payment or a charging card. But when something goes wrong, you may need the operator's app to diagnose the problem or start a session manually.

Symptoms

• Contactless payment failed and there is no other way to start
• Charger shows an error code you do not understand
• You want to check real-time status but the charger screen is unhelpful
• QR code on the charger leads to an app you do not have installed

How to Fix It

1. 1

   Scan the QR code on the charger

   This usually opens the operator's web interface or app store page. Lidl chargers are operated by different companies depending on the country (Compleo, Allego, E.ON, and others).

2. 2

   Note the operator name on the charger

   The charging operator is printed on the charger unit, usually near the base or on the payment terminal. Search for their app if you need to start a session or report a fault.

3. 3

   Try a roaming app

   Apps like Chargemap, Shell Recharge, or Plugsurfing often have roaming access to Lidl chargers. If the contactless reader is broken, starting through a roaming app may work.

4. 4

   Call the support number on the charger

   There is almost always a phone number on the charger unit for the operator's helpline. They can sometimes start or reset a session remotely.

Charger placement blocks adjacent parking spots

Some Lidl charger installations make it difficult to park in adjacent spots when a car is plugged in. The cable or the charger unit itself can obstruct neighboring bays.

Symptoms

• Your charging cable stretches across the next parking spot
• Parked car at the charger blocks you from entering the adjacent bay
• Cable does not reach your charge port without parking at an awkward angle
• Other shoppers complain about the cable crossing the walkway

How to Fix It

1. 1

   Park with your charge port closest to the charger

   Know which side of your car the charge port is on. If possible, pull in from the direction that puts the port nearest to the cable. This keeps the cable short and out of the way.

2. 2

   Route the cable over your car if needed

   If the cable must cross to the opposite side, drape it over the hood or roof rather than across the ground where people walk. Most DC cables are long enough for this.

3. 3

   Use the spot that causes the least obstruction

   If multiple charging spots are available, choose the one where your charge port alignment minimizes cable stretch across other bays.

4. 4

   Be mindful of the time limit

   Do not leave your car plugged in longer than necessary. In a tight parking lot, a plugged-in car blocking adjacent spots is more frustrating than one that is simply parked.