Honda e:Ny1 Charging at Iberdrola

Honda e Ny1 Charger Will Not Start a Charging Session

You have connected the charger to your Honda e:Ny1, but the session is not starting. The screen is blank, there is an error, or the car just does not respond. As Honda's first mass-market European EV, the e:Ny1 uses standard connectors but has a few quirks worth knowing.

Symptoms

• The CCS2 or Type 2 connector is plugged in but no charging begins
• The Honda e:Ny1's instrument cluster does not show a charging indicator
• The charger screen shows an error code after plug-in
• You hear the connector lock engage but power does not flow
• The charging app shows the session failed to start

What to Do

1. 1

   Authenticate before plugging in

   Tap your RFID card or start the session in the charging app before inserting the connector. Wait for the charger screen to show 'ready' or 'plug in now.'

2. 2

   Unplug and firmly reinsert

   Remove the connector completely from the e:Ny1's charge port on the front right. Wait 10 seconds, then reinsert it firmly until you hear the locking click.

3. 3

   Check for a charging timer

   On the Honda e:Ny1's dashboard, navigate to the charging settings and check if a timer is active. Disable it if you need to charge immediately.

4. 4

   Reset the car's charging system

   Turn the car off, lock it with the key fob, wait 30 seconds, then unlock and try again. This can clear any error state from a previously interrupted session.

5. 5

   Inspect the charge port

   Check the charge port for moisture, dirt, or debris. Clean it gently with a dry cloth if needed. Make sure the port flap opens fully.

6. 6

   Try a different charger

   If the charger still will not start after trying all steps, move to a different unit. The charger is more likely to be the problem than the car.

Honda e Ny1 Payment Not Working at Charging Station

You are at a charger with your Honda e:Ny1 and the payment is not going through. Card declined, app not working, RFID not recognized. This has nothing to do with your car. It is a charger and payment network problem. Here is how to get past it.

Symptoms

• RFID card tap produces no response from the charger
• Charging app shows a payment authorization error
• Bank card is declined at the charger terminal
• Charger screen shows 'payment failed' or a generic error
• You cannot find any accepted payment method on the charger

What to Do

1. 1

   Check which payments the charger accepts

   Look at the charger screen and stickers for accepted payment methods. If none of your options are listed, you need to move to a different charger or sign up for that network.

2. 2

   Try a different payment method

   Switch between RFID card, charging app, and contactless bank card. If one method fails, another may work on the same charger.

3. 3

   Verify your card balance

   Open your banking app and check that you have at least 80 EUR available. Top up or switch to a card with more available balance if needed.

4. 4

   Hold the RFID card steadily for 3 seconds

   Place the card flat on the reader and hold it without moving. Some readers are slow and need a longer contact time to register.

5. 5

   Update your charging app payment details

   Open each charging app you use and check that the stored payment method is current. Update any expired cards.

6. 6

   Move to another charger unit

   If nothing works on this charger, try the next unit at the same station. Individual card readers fail while other units work fine.

Honda e Ny1 Charging Slower Than Expected DC and AC

You plugged in your Honda e:Ny1 expecting fast charging, but the speed is disappointing. The e:Ny1 tops out at 78 kW DC, which is slower than many competitors. Without preconditioning or a heat pump, cold weather makes it worse. Here is what is happening and what you can do.

Symptoms

• DC fast charging well below the 78 kW maximum
• AC home charging stuck at 3-4 kW instead of 11 kW
• Charging speed drops significantly after 50% state of charge
• Cold weather charging is extremely slow
• Charging from 10% to 80% takes much longer than expected

What to Do

1. 1

   Drive before charging in cold weather

   Since the e:Ny1 has no preconditioning, drive for 20-30 minutes before stopping at a DC charger in winter. The driving warms the battery through use, which improves charging acceptance.

2. 2

   Check your state of charge

   For the best speeds, arrive at the charger between 10-20% and charge to 80%. The e:Ny1's peak power is available mainly below 50%.

3. 3

   Choose a charger rated above 100 kW

   Even though the e:Ny1 maxes out at 78 kW, using a higher-rated charger ensures you are not bottlenecked by the charger. Avoid 50 kW units when faster options are available.

4. 4

   Verify your AC installation

   For home charging, confirm with your electrician that your wallbox is wired for three-phase at 16A to deliver the full 11 kW. Single-phase installations will be about a third of that speed.

5. 5

   Check if the charger is sharing power

   Look at the charger. If two cables come from the same unit and someone is using the other one, you may be sharing power. Move to a solo charger if possible.

6. 6

   Try a different charger

   If your speed is still well below 60-70 kW at a low state of charge and warm battery, the charger may be degraded. Test a different unit.

App defaults to Spanish

The Iberdrola app opens in Spanish regardless of your phone's language setting. Finding the language switch can be confusing if you do not read Spanish.

Symptoms

• All app text is in Spanish after installation
• Language setting is not obvious in the menus
• Error messages and charger instructions appear only in Spanish
• Switching your phone's language does not change the app

How to Fix It

1. 1

   Open the app settings and look for 'Idioma'

   'Idioma' means 'Language' in Spanish. It is usually under the profile or settings menu (gear icon). Tap it and select English or your preferred language.

2. 2

   Check the profile or account section

   Some versions of the Iberdrola app place the language selector inside the user profile rather than in general settings. Look for your name or account icon at the top of the screen.

3. 3

   Update the app to the latest version

   Iberdrola has been improving multi-language support. Older versions may not have your language available. Update from the App Store or Google Play.

4. 4

   Use a roaming app as a backup

   If the language barrier is too frustrating, roaming apps like Chargemap, Shell Recharge, or Electropass work at many Iberdrola stations and offer broader language support.

Contactless payment session timeout

After tapping your card on an Iberdrola charger, there is a short window to plug in the cable and start charging. If you take too long, the session times out and you need to tap again.

Symptoms

• You tapped your card but by the time you connected the cable, nothing happened
• Charger screen shows 'Session expired' or returns to the start screen
• You were charged a pre-authorization but no energy was delivered
• The charger seemed ready but then went back to idle

How to Fix It

1. 1

   Plug in the cable first, then tap your card

   At Iberdrola stations, connect the cable to your vehicle before tapping your contactless card. This gives the charger the best chance to start immediately after authentication.

2. 2

   Tap your card again and act quickly

   After the tap, you typically have 60 to 90 seconds to complete the connection. If you missed the window, tap again. The pre-authorization from the first attempt will be released.

3. 3

   Use the Iberdrola app instead

   The app does not have the same time pressure. You can connect the cable, open the app, select the charger, and start at your own pace.

4. 4

   Check your bank statement for ghost charges

   Failed contactless attempts may show a pre-authorization hold. These are not actual charges and typically release within 3 to 7 business days. Contact your bank if they persist.

Confusing signage at gas station locations

Some Iberdrola chargers are located at gas stations (Repsol, Cepsa, or others). The EV charging area may not be clearly separated from the fuel pumps, and signage can be confusing.

Symptoms

• You cannot find the EV chargers at the gas station
• GPS directs you to the fuel pumps instead of the charging area
• Signage points to 'carga' or 'recarga' but the direction is unclear
• The charging spots are behind the gas station building or in an overflow lot

How to Fix It

1. 1

   Look for the charging area separate from the fuel pumps

   EV chargers at gas stations are almost always in a dedicated area away from the fuel pumps. Look for tall charger cabinets (about 2 meters high) rather than fuel dispensers.

2. 2

   Drive past the fuel pump area

   The charging area is often behind the main building, in a side lot, or at the far end of the property. Drive through the station slowly and look for the Iberdrola or charging network signage.

3. 3

   Ask the gas station attendant

   If the station has staff, ask where the electric charging points are. In Spanish, 'Donde estan los cargadores electricos?' gets the point across.

4. 4

   Check the Iberdrola app for station photos

   The station detail page in the Iberdrola app sometimes includes photos or access instructions that help you find the chargers within a larger gas station complex.

Mix of slow and fast chargers at the same station

Some Iberdrola stations have both AC chargers (7 to 22 kW) and DC fast chargers (50 to 350 kW) next to each other. It is easy to plug into a slow charger by mistake if you are not paying attention.

Symptoms

• You expected fast charging but your dashboard shows only 7 or 22 kW
• The charger you plugged into looks smaller than the others at the station
• You used a Type 2 cable instead of a CCS2 connector
• The charging session is going to take hours instead of minutes

How to Fix It

1. 1

   Check the charger label for power output

   Iberdrola chargers display their rated power (e.g., 50 kW, 150 kW, 350 kW) on the unit. Look for this label before plugging in. AC chargers (7 to 22 kW) are typically smaller and have Type 2 sockets.

2. 2

   Use the CCS2 connector for fast charging

   The CCS2 connector is the large combined plug for DC fast charging. If you used the smaller Type 2 plug (round with pins), you are on AC and will charge slowly.

3. 3

   Check the Iberdrola app for charger details

   The app shows each charger unit's power level at a station. Before plugging in, confirm which unit is the high-power DC charger.

4. 4

   Unplug and move to the fast charger

   If you accidentally started an AC session, stop the session in the app, unplug, and move to the DC fast charger. You will not be charged a penalty for a short session.

Power delivery varies by time of day

Some Iberdrola stations deliver noticeably less power during peak grid hours (typically early evening). This is due to grid constraints, not a charger fault.

Symptoms

• Charging speed is significantly lower in the evening than the same station delivered in the morning
• Speed starts high but drops during peak hours even at low battery levels
• Other vehicles at the station also show reduced speeds at the same time
• The charger does not reach its rated power despite your vehicle supporting it

How to Fix It

1. 1

   Check your battery level first

   The most common reason for reduced charging speed is a battery above 60 to 80% state of charge. Your vehicle limits the charging rate at higher battery levels regardless of the charger's capability.

2. 2

   Try charging during off-peak hours

   If your schedule allows, charge during late evening (after 10 PM) or early morning. Grid demand is lower and the station can deliver its full rated power.

3. 3

   Check for power sharing between chargers

   If multiple chargers are in use at the same station, they may share a grid connection. Charging when fewer vehicles are plugged in can improve your speed.

4. 4

   Try a different station nearby

   Not all Iberdrola stations have the same grid connection. A station a few kilometers away may have a better power supply and deliver higher speeds during peak hours.

5. 5

   Accept the reduced speed if you are above 60%

   If your battery is above 60%, the speed reduction is mostly from your vehicle's battery management, not the grid. This is normal and protects your battery's long-term health.