Citroën e-C4 Charging at Be.EV

Citroen e-C4 Charger Won't Start? Step-by-Step Fix

Your Citroen e-C4 is connected to the charger but nothing is happening. No power, no progress, and maybe an error flashing on the charger screen. This is a common problem at public charging stations and it usually has a straightforward fix.

Symptoms

• CCS2 connector inserted but no charging session begins
• Charger screen shows an error code or connection failure
• The e-C4's charge port indicator does not light up or blinks red
• Charger starts to initialize but disconnects within seconds
• Type 2 connector locks in at an AC station but no power flows

What to Do

1. 1

   Complete the authentication step

   Tap your RFID card, start a session in the charging app, or use contactless payment. Follow the charger's on-screen instructions. Some networks require authentication before plugging in, others after.

2. 2

   Unplug and firmly reseat the connector

   Pull the CCS2 or Type 2 connector out completely and reinsert it straight into the charge port with a firm push until it clicks. Keep the cable aligned and support its weight.

3. 3

   Disable scheduled charging on the touchscreen

   Open the charging settings on the e-C4's central touchscreen. Turn off any scheduled or deferred charging mode so the car accepts power immediately.

4. 4

   Clean the charge port

   Check the charge port on the left rear for dirt, salt, or ice. Wipe the contacts with a dry cloth. In freezing weather, gently clear any ice from the port opening and door.

5. 5

   Lock and unlock the vehicle to reset

   Use the key fob or the MyCitroen app to lock the car, wait 10 seconds, then unlock it. This resets the charge port controller. Try plugging in again.

6. 6

   Try a different charger

   Move to another stall at the same station or find a nearby alternative. Some charger faults affect only one unit while others at the same site work fine.

Citroen e-C4: Charger Payment Failed? Quick Fixes

Your Citroen e-C4 is plugged in, but the payment is not going through. RFID rejected, app error, or bank card declined. This is entirely a charger and payment issue, not a car problem. Here is how to sort it out and start charging.

Symptoms

• RFID card rejected with an error beep or message
• Charging network app shows a payment error or session failure
• Contactless bank card declined at the charger terminal
• Pre-authorization hold appears but no charging session starts
• Charger starts briefly then stops with a billing error

What to Do

1. 1

   Check accepted payment methods on the charger

   Look at the charger's display and body for logos showing which RFID networks, apps, or card payment options are accepted.

2. 2

   Try a different payment method

   Switch from RFID to the network app, or from the app to a contactless bank card. Always carry at least two options.

3. 3

   Check your bank card balance

   Open your banking app and confirm you have enough available balance for a pre-authorization hold. Some chargers hold up to 80 EUR upfront.

4. 4

   Update or restart the charging app

   Check for updates, close and reopen the app, and look for any stuck open sessions. Log out and back in if the problem persists.

5. 5

   Use the charger's built-in card reader

   Look for a contactless card reader on the charger. More European stations now offer direct bank card payment, which bypasses RFID and app issues.

6. 6

   Call the support number on the charger

   Every public charger displays a support number. The operator can sometimes start a session remotely or diagnose the payment issue from their end.

Citroen e-C4 Charging Too Slow? How to Fix It Now

Your Citroen e-C4 can charge at up to 100 kW on a DC fast charger, but you might be getting far less. The 50.8 kWh NMC battery sits on the Stellantis e-CMP platform, and its charging behavior has some known limitations. Here is what holds back your speed and how to work around it.

Symptoms

• DC charging power stays well below 100 kW even at a high-power station
• Charging speed drops steeply before reaching 50% state of charge
• AC charging at home maxes out at 3.6 kW instead of 11 kW
• The touchscreen shows an estimated time much longer than expected
• Cold weather charging sessions take nearly twice as long as summer sessions

What to Do

1. 1

   Drive at highway speed for 15-20 minutes before fast charging

   Since the e-C4 has no battery preconditioning, active driving is the best way to warm the battery. Highway driving before your charging stop makes a meaningful difference in cold weather charging speeds.

2. 2

   Arrive at the charger between 10% and 20%

   The e-C4 charges fastest at low state of charge. Plan your stop so you arrive around 10-15% to take advantage of peak speeds. The difference between 10% and 50% arrival can be 30-40 kW.

3. 3

   Pick a charger stall that is not sharing power

   Check if two CCS2 cables come from one cabinet. Choose the stall where the other connector is free. This ensures you get the full power output from the charger.

4. 4

   Verify your home AC setup

   Check the power reading on the e-C4's touchscreen during a home AC charge. If it shows about 3.6 kW, you are on single-phase power. A three-phase upgrade unlocks the full 11 kW.

5. 5

   Monitor the charging screen

   During DC charging, watch the current power on the touchscreen. If it starts low, the battery may be warming up. Give it 5-10 minutes. Power should gradually increase as the battery temperature rises.

6. 6

   Stop DC charging at 80% on road trips

   The last 20% takes disproportionately long. On longer drives, unplug at 80% and drive to the next charging stop. You will save significant time overall.