BMW i7 Charging at Allego

BMW i7 Charger Won't Start: Step-by-Step Fix Guide

You have connected your BMW i7 to a public charger, but the session refuses to start. No charging indicator, no power, just frustration. This is a common issue that usually comes down to authentication, cable seating, or charger status. Here is what to check.

Symptoms

• Charger display shows 'waiting for vehicle' despite the cable being connected
• iDrive does not indicate any charging activity
• The i7's charge port LED stays off or flashes red
• The CCS2 connector does not lock into the port
• An error message appears on the charger screen after plugging in

What to Do

1. 1

   Unlock the car and open the charge port

   Ensure the i7 is unlocked. Press the charge port flap on the rear right side to open it. Some i7 models also let you open it through the My BMW app.

2. 2

   Insert the connector until it clicks

   Push the CCS2 or Type 2 connector straight into the port firmly. You should hear a click when it locks. The i7's port LED should illuminate once the connection is established.

3. 3

   Authenticate at the charger

   Tap your RFID card on the reader, start the session in your charging app, or use contactless payment at the terminal. Wait for the charger to confirm before expecting power flow.

4. 4

   Disable scheduled charging

   In iDrive, navigate to Charging Settings. If departure time or a schedule is set, switch to Charge Immediately. This ensures the i7 starts as soon as the charger is ready.

5. 5

   Disconnect and retry

   Remove the cable, wait 15 seconds, and reconnect. This resets the communication protocol between the i7 and the charger.

6. 6

   Try another charger

   If nothing resolves the issue, the charger is likely faulty. Move to a different stall or station and report the broken unit through the network's app.

BMW i7 Charging Payment Failed: How to Resolve Fast

Your BMW i7 is plugged in at a public charger, but the payment will not go through. RFID card not recognized, app error, or bank card declined. This is not a car issue, but it blocks your charging session all the same. Here is how to work through it.

Symptoms

• The charger shows 'authentication failed' after tapping your RFID card
• Your charging app displays a payment error when starting a session
• Contactless bank card is declined at the charger terminal
• The charger prompts for payment but none of your methods work
• A session starts then immediately cancels due to a billing issue

What to Do

1. 1

   Try an alternative payment method

   Switch from RFID to the charging app, or from the app to contactless bank card. Most chargers accept at least two payment methods.

2. 2

   Check your account and card details

   Open your charging app and verify the linked payment method is current. For prepaid accounts, ensure your balance covers the session.

3. 3

   Verify the charger accepts your provider

   Look at the charger for logos of accepted networks. If yours is not listed, you need ad-hoc payment or a different card.

4. 4

   Use the QR code for ad-hoc payment

   Scan the QR code on the charger with your phone camera. This opens a browser-based payment page where you can pay with any credit or debit card, no app required.

5. 5

   Restart the authorization

   Cancel any pending session in the app and start fresh. Sometimes the first authorization attempt fails but a second one succeeds.

6. 6

   Contact the network's support line

   Most chargers display a phone number for the operator. They can sometimes authorize a session on their end or identify the specific payment issue.

BMW i7 xDrive60 Charging Slow: Causes and Solutions

Your BMW i7 xDrive60 has a large 101.7kWh battery and supports up to 195kW DC fast charging. But if the numbers on iDrive are disappointing, you are not alone. Several factors can limit the i7's charging speed, and knowing what to look for helps you get the most out of every stop.

Symptoms

• DC fast charging power shown in iDrive is well below 195kW
• The large 101.7kWh battery takes much longer than expected to charge
• Charging curve drops off steeply after 40-50%
• AC charging speed is limited to 11kW despite using a faster station
• A temperature or battery conditioning message appears in iDrive

What to Do

1. 1

   View charging details in iDrive

   The iDrive display shows current kW, battery temperature, and time remaining. Check whether the car or the charger is the bottleneck by comparing the current kW to the charger's rated output.

2. 2

   Precondition before every fast charge

   Enter the charging station as a destination in iDrive. The i7's thermal management will bring the battery to the ideal temperature range while driving. This is the single biggest factor in cold weather charging speed.

3. 3

   Find chargers rated 200kW or above

   Use the My BMW app or a charger map to locate high-power stations. Ionity and Fastned locations typically offer 300kW+ chargers that let the i7 reach its peak.

4. 4

   Choose an unoccupied charger pair

   If the station has paired stalls, pick one where the adjacent stall is empty. This avoids power sharing and gives your i7 full access to the charger's output.

5. 5

   Charge between 10% and 80%

   Plan stops to arrive between 10% and 15% and leave around 80%. The i7's large battery means even 80% gives you substantial range, and you avoid the slow tail end of the charging curve.

6. 6

   Check for OTA software updates

   BMW releases over-the-air updates that can improve charging behavior. Go to Settings, then Software Update in iDrive to check for and install any available updates.

Allego app not starting a session

You open the Allego app, select the charger, tap 'Start,' and nothing happens. The app may spin, show an error, or claim the charger is offline even though the screen in front of you says otherwise.

Symptoms

• Allego app shows a loading spinner that never finishes
• 'Charger unavailable' in the app but the physical charger looks operational
• App crashes when tapping 'Start Charging'
• Session appears to start in the app but the charger does not begin delivering power

How to Fix It

1. 1

   Make sure you selected the correct charger and connector

   Allego stations often have multiple charging points. Each one has its own ID, usually printed on a sticker near the connector. Match this ID to the one shown in the Allego app. Selecting the wrong point is the most common reason a session will not start.

2. 2

   Plug in the cable before starting the session in the app

   Most Allego chargers require the cable to be connected to your car first. The charger needs to detect a vehicle before it will accept a start command from the app.

3. 3

   Close and reopen the Allego app

   Force-close the app completely (swipe it away from your recent apps), wait a few seconds, and reopen it. Try starting the session again.

4. 4

   Scan the QR code on the charger instead

   Most Allego chargers have a QR code that opens a web-based payment page. This works independently of the Allego app and lets you pay with a credit card without needing an account.

5. 5

   Use an RFID card from a roaming provider

   If you have an RFID card from a provider like Shell Recharge, Plugsurfing, or Chargemap, hold it against the reader on the charger. This bypasses the Allego app entirely.

Charger not appearing in the Allego app

You are standing in front of a physical Allego charger, but it does not show up on the Allego app map. The charger is clearly operational and other drivers are using it.

Symptoms

• Charger location is missing from the the Allego app map entirely
• App shows the location but with zero available connectors
• Charger appears under a different brand name in other apps but not in the Allego app
• Newly installed charger not yet listed

How to Fix It

1. 1

   Check if the charger is operated under a different brand

   Allego operates under various local labels in different countries. The charger might be listed under the local brand name rather than 'Allego' in some apps. Look for a sticker or sign on the charger that shows the operator name and EVSE ID.

2. 2

   Search by charger ID instead of location

   In the Allego app, try the search function and enter the charger's EVSE ID (printed on the unit, usually starting with a country code like DE*, NL*, or FR*). This can find chargers that are not correctly placed on the map.

3. 3

   Use the QR code on the charger

   Scan the QR code on the charger with your phone camera. This will open a direct link to start a session, even if the charger is missing from the app map.

4. 4

   Try a different charging app

   Allego chargers are accessible through many roaming providers. Open an app like Chargemap, Shell Recharge, or Plugsurfing and search for the same location. You may be able to start the session there.

Third-party RFID card not accepted

You hold your RFID card from another provider against the reader and the charger beeps but rejects it, or nothing happens at all.

Symptoms

• Charger beeps once but displays 'Card not recognized'
• No reaction when holding the RFID card to the reader
• Card works at other networks but not at this Allego charger
• 'Authorization failed' message on the charger screen

How to Fix It

1. 1

   Check if your roaming provider covers Allego

   Not all RFID providers have roaming agreements with Allego. Check your provider's app or website to confirm Allego is listed in their coverage. Some providers cover only certain Allego locations.

2. 2

   Hold the card flat and steady for 3 seconds

   Do not wave or tap the card. Place it flat against the reader and hold it still. Allego readers can be slower to respond than some other networks.

3. 3

   Try a different position on the reader

   The RFID antenna inside the reader has a specific sweet spot. Move your card slowly across the reader surface until you get a response. On some Allego chargers, the reader is on the right side panel rather than the front.

4. 4

   Check your RFID card is activated

   Some providers require you to activate your RFID card in their app before first use. Open your provider's app and look for card activation or card management settings.

5. 5

   Fall back to QR code or Allego app

   If your RFID card will not work, scan the QR code on the charger for direct credit card payment, or download the Allego app and register to start the session digitally.

Long delay before charging actually starts

You have authenticated and the charger says it is starting, but 30 seconds, sometimes over a minute, passes before any power flows to your car.

Symptoms

• Charger screen says 'Starting' or 'Initializing' for over 30 seconds
• Car shows 'Waiting for charger' or 'Preparing'
• Power reading stays at 0 kW for a full minute after authentication
• You wonder if you should unplug and try again

How to Fix It

1. 1

   Wait at least 90 seconds before taking action

   Allego high-power chargers perform a communication handshake with your car before delivering power. This includes safety checks, voltage negotiation, and isolation testing. A 30-60 second delay is normal, especially on 350 kW units.

2. 2

   Do not unplug during the initialization phase

   Unplugging and re-plugging resets the entire handshake process. If the charger screen shows any progress (status messages, icons changing), let it complete.

3. 3

   Check if your car's charge port is locked

   The connector should be locked into your car's charge port during initialization. If you can wiggle the connector freely, it may not be fully inserted. Push it in firmly and listen for the lock click.

4. 4

   If nothing happens after 2 minutes, restart the session

   Unplug the connector, wait 10 seconds, plug it back in, and authenticate again. If the delay repeats, try a different connector or charger at the same station.

Charging power much lower than advertised

The charger is rated for 350 kW, but your car is only pulling 50 kW or less. The session is working, just far slower than expected.

Symptoms

• Car or charger display shows 40-80 kW on a 350 kW charger
• Estimated charge time is much longer than expected
• Power started high but dropped dramatically within minutes
• Other cars at the same station seem to charge faster

How to Fix It

1. 1

   Check your battery level

   DC charging slows significantly above 60-70% state of charge on most cars. If your battery is already at 65% or higher, the reduced speed is your car protecting its battery, not a charger problem.

2. 2

   Check your car's maximum DC charging rate

   A 350 kW charger can deliver up to 350 kW, but your car decides how much to accept. Many EVs top out at 100-150 kW. Check your car's specifications for its maximum DC charging speed.

3. 3

   Consider battery temperature

   Cold batteries charge slowly. If you have been parked for hours in cold weather without preconditioning, your car may limit charging to 30-60 kW until the battery warms up. Some cars let you precondition the battery by setting the charger as your navigation destination.

4. 4

   Check if the station is power-sharing

   Some Allego stations share power between multiple chargers. If three cars are charging simultaneously, each one may get less than the maximum. This is normal at shared-power sites.

5. 5

   Try a different connector at the same station

   Occasionally one connector delivers less power due to a hardware limitation. If you are getting unusually low power even at a low battery level, unplug and try the next unit.