BMW i5 Charging at Neste

BMW i5 eDrive40 Charger Won't Start: Fix Guide Now

You have connected your BMW i5 to a charger, but the session will not start. The charger sits idle, iDrive shows nothing, or you get an error message. This is one of the most reported problems at public chargers, and the fix is usually simple.

Symptoms

• The charger screen stays on 'connect vehicle' after plugging in the CCS2 cable
• iDrive does not show any charging activity
• The charge port LED on the i5 does not illuminate
• An error code appears on the charger display
• The connector does not lock into the charge port

What to Do

1. 1

   Make sure the i5 is unlocked

   The charge port only opens and accepts a connector when the car is unlocked. Use the key fob or My BMW app to unlock if needed.

2. 2

   Seat the connector firmly

   Push the CCS2 or Type 2 plug straight into the port until it clicks and locks. The charging port is on the rear right of the i5. Do not twist or angle the connector.

3. 3

   Complete authentication at the charger

   Tap your RFID card, start the session in the charging app, or pay via contactless. The charger needs authorization before it sends power to your i5.

4. 4

   Check iDrive for scheduling conflicts

   Open iDrive and navigate to Charging, then Charging Settings. If a departure time or scheduled window is active, switch to 'Charge Immediately' to override it.

5. 5

   Unplug and reconnect

   Remove the connector, wait 15 seconds, then plug in again. This forces a new handshake between the i5 and the charger, which resolves many communication issues.

6. 6

   Move to another charger

   If nothing works, the charger is likely faulty. Try another stall or station. Report the broken charger through the network app so others are warned.

BMW i5 Charging Payment Failed: Solutions That Work

Your BMW i5 is plugged in and ready, but the charger will not accept your payment. Whether it is an RFID card that gets no response, an app that throws an error, or a declined bank card, this stops you from charging. Here is how to get past it quickly.

Symptoms

• Charger shows 'authentication failed' or 'payment error'
• RFID card tap produces no response on the charger
• Charging app fails to start the session with a payment error
• Contactless bank card is declined at the charger terminal
• Session starts but immediately cancels with a billing error

What to Do

1. 1

   Switch to a different payment method

   Try another RFID card, a different charging app, or contactless bank card. Having at least two options means one failure does not strand you.

2. 2

   Verify your account status

   Open the charging app and check your payment method, balance, and subscription status. Fix any issues before retrying.

3. 3

   Check which networks this charger accepts

   Look for network logos on the charger unit. If your provider is not listed, you need ad-hoc payment or a different provider.

4. 4

   Scan the QR code for ad-hoc payment

   Most modern European chargers have a QR code. Scan it with your phone to open a web-based payment page. You can pay with any credit or debit card, no app needed.

5. 5

   Cancel and restart the session

   If the payment seemed to process but charging did not start, cancel the session in the app and try again. A fresh authorization attempt often works.

6. 6

   Call the network's support number

   The charger should display a support phone number. The operator can sometimes authorize sessions remotely or troubleshoot billing issues in real time.

BMW i5 eDrive40 Charging Too Slow: Causes and Fixes

Your BMW i5 eDrive40 can charge at up to 205kW on a DC fast charger, which is impressive for a 400V car. But if you are seeing far lower numbers on the iDrive display, something is limiting the power. Most causes are easy to identify and fix.

Symptoms

• DC charging power shown in iDrive is well below 205kW
• Charging takes much longer than expected for the 81.2kWh battery
• Speed drops drastically above 50% state of charge
• AC charging is stuck at 11kW even at a 22kW station
• iDrive displays a battery temperature warning or conditioning message

What to Do

1. 1

   Check current power in iDrive

   Open the charging screen on iDrive to see the live kW figure, battery temperature, and estimated completion time. This tells you immediately whether the car or the charger is the limiting factor.

2. 2

   Precondition the battery before arriving

   Enter the charging station as a destination in iDrive navigation. The i5 will automatically warm (or cool) the battery to optimal charging temperature while you drive. This can double your initial charging speed in winter.

3. 3

   Choose a high-power charger

   Use the BMW app or a charger map to find stations rated at 200kW or above. Ionity, Fastned, and some Shell Recharge stations offer 300kW+ chargers that let the i5 reach its peak.

4. 4

   Avoid power-sharing stalls

   At charger parks with paired stalls (A1/A2, B1/B2), choose a pair where the other stall is empty. This gives your i5 the full charger output.

5. 5

   Charge in the optimal range

   Plan your stops to arrive between 5% and 15% and leave at 80%. This keeps you in the fastest part of the i5's charging curve and minimizes time per kWh added.

6. 6

   Install software updates

   BMW pushes OTA updates that can improve charging performance. Check iDrive under Settings, then Software Update, and install any pending updates.

Confusing fuel station layout

Neste EV chargers are located at fuel stations alongside petrol and diesel pumps. First-time visitors often struggle to find the charger or accidentally drive to the fuel pump area instead.

Symptoms

• You drove into the fuel pump lane instead of the EV charging area
• The EV charger is around the back or side of the station, not visible from the entrance
• Signage for EV charging is missing or hard to see among fuel station branding
• You pulled up to what you thought was a charger but it is a compressed natural gas (CNG) pump

How to Fix It

1. 1

   Look for dedicated EV signage before pulling in

   Neste EV chargers are usually in a separate area from the fuel pumps, often to the side or behind the main station building. Look for green EV charging signs or CCS2 connector symbols.

2. 2

   Check the Neste app for a station map

   Some Neste station listings in the app include a layout or photo showing where the EV chargers are located relative to the fuel pumps. Check this before you arrive.

3. 3

   Drive past the fuel pump area

   If you do not see the charger immediately, continue driving past the fuel pumps. EV chargers at fuel stations are often placed at the edge of the property or near truck parking areas.

4. 4

   Ask the station staff

   Neste station staff can point you to the EV charging area. The indoor counter staff deal with this question regularly.

Neste app charging section is hard to find

The Neste app is primarily designed for fuel customers, loyalty programs, and car wash services. The EV charging feature can be buried in the navigation.

Symptoms

• You downloaded the Neste app but cannot find where to start an EV charging session
• The app homepage shows fuel prices and loyalty points but no obvious EV charging option
• You found a charger map but tapping on a station does not show a 'Start charging' button
• The app keeps directing you to fuel-related features instead of EV charging

How to Fix It

1. 1

   Look for a 'Charging' or 'EV' tab in the app

   Neste has been adding EV features gradually. The charging section may be under a dedicated tab, in the station details, or under a services menu. It is not always on the home screen.

2. 2

   Search for the specific station in the app

   Use the station finder and select the station you are at. The station details page should show whether EV charging is available and give you the option to start a session.

3. 3

   Use an alternative payment method

   If the app is frustrating, use contactless card payment or an RFID card directly at the charger. You do not need the Neste app to charge. The charger works independently.

4. 4

   Check if a third-party app has roaming access

   Neste chargers may be available through roaming networks. Apps like Virta, Plugsurfing, or Shell Recharge might offer access to Neste stations without using the Neste app at all.

RFID card works at fuel pumps but not at the charger

Your Neste loyalty card or fuel RFID card works for paying at the fuel pump but the EV charger does not recognize it. The fuel and EV charging systems use different authentication.

Symptoms

• Neste loyalty card tapped at the EV charger shows 'Card not recognized'
• Fuel RFID works at the pump but does nothing at the charger
• You assumed the same card works for everything at the Neste station
• Staff at the counter say the card should work but it does not

How to Fix It

1. 1

   Understand that fuel and EV charging use separate systems

   Neste's fuel payment infrastructure and EV charging infrastructure are different platforms. A card that authenticates at the pump may not be registered for EV charging.

2. 2

   Check which RFID cards the charger accepts

   Look at the charger screen or signage for logos of accepted charging networks. The charger may accept cards from Virta, Hubject partners, or other EV roaming networks, but not the Neste fuel loyalty card.

3. 3

   Use contactless bank card payment

   If your RFID card is not accepted, tap your debit or credit card on the contactless reader. This works independently of any loyalty program.

4. 4

   Register for EV charging in the Neste app

   If you want to use the Neste ecosystem for EV charging, you may need to activate EV charging as a separate service in your Neste account or app. This links your account to the charging platform.

Charger occupied during commute hours

Neste stations along commuter routes get heavy EV charging traffic during morning and evening rush hours. This is especially common at stations near highways and main roads.

Symptoms

• All chargers occupied when you arrive during morning or evening commute
• App shows the station as available but all stalls are in use when you get there
• Waiting 20+ minutes for a stall to free up
• Cars queued informally with no clear system for who is next

How to Fix It

1. 1

   Check real-time availability before driving to the station

   Use the Neste app or a third-party app to see how many stalls are currently free. Status may lag by a few minutes, so treat it as approximate.

2. 2

   Have a backup station in mind

   Before heading to a Neste station during peak hours, identify one or two alternatives within 10 to 15 minutes. Another Neste station, a competitor, or a supermarket charger nearby.

3. 3

   Shift your charging to off-peak if possible

   Charging at 06:00 or 21:00 instead of 08:00 or 17:30 dramatically reduces wait times at commuter-route stations.

4. 4

   Do not wait indefinitely

   If all stalls are occupied and there are cars waiting ahead of you, the math may not work. Two cars at 30 minutes each means an hour of waiting. Drive to the next available station instead.

Contactless payment has a minimum charge amount

Some Neste EV chargers require a minimum charge amount for contactless bank card transactions. If you only need a few kWh, the payment terminal may reject the transaction or apply a minimum fee.

Symptoms

• Contactless payment rejected with 'Below minimum amount' message
• You only wanted a quick top-up but the charger requires a minimum session value
• Pre-authorization hold is larger than the amount of energy you plan to use
• You are charged a minimum fee even for a very short session

How to Fix It

1. 1

   Check the minimum transaction amount on the charger screen

   The charger should display the minimum charge before you tap your card. This is typically 1 to 5 EUR depending on the payment processor.

2. 2

   Use an RFID card or app instead

   RFID cards and app-based sessions often do not have minimum transaction requirements. You pay only for the energy you use, even for short sessions.

3. 3

   Charge a bit longer to meet the minimum

   If you are just below the minimum, adding a few more kWh brings you above the threshold and you avoid any issues with the payment processor.

4. 4

   Understand the pre-authorization hold

   Contactless payments pre-authorize a fixed amount (often 50 to 100 EUR). The actual charge is calculated after the session ends. The difference between the hold and the actual charge is released back to your account within a few business days.