BMW i4 Charging at Lidl Charging

BMW i4 Charger Won't Start? Step-by-Step Solutions

You've plugged in the CCS2 cable to your BMW i4's right rear charge port, but nothing happens. This is one of the most common frustrations at public chargers. The good news is that most causes are fixable on the spot.

Symptoms

• CCS2 connector is plugged into the right rear port but the charger screen shows no vehicle detected
• Charger displays an error code and refuses to start the session
• My BMW app shows the car is plugged in but not charging
• The charge port LED on the i4 flashes or stays amber instead of turning blue
• Authentication via app or RFID card goes through but charging never begins

What to Do

1. 1

   Unplug the CCS2 cable and reseat it firmly

   Pull the connector out completely. Check the pins for debris or damage. Line it up straight with the charge port on the right rear and push until you hear a clear click. The charge port LED should respond.

2. 2

   Check the charge port LED color on the car

   Blue pulsing means the car is ready to charge. Amber or yellow means something is wrong on the car side. No light at all may mean the port isn't detecting the cable. Open the My BMW app for more detail.

3. 3

   Disable any charging schedule in iDrive

   On the iDrive curved display, go to the charging settings and check for active schedules or departure times. Disable scheduled charging temporarily if you want to charge immediately at a public station.

4. 4

   Try authenticating again or use a different method

   If Plug & Charge didn't start the session, open the charging network's app and start manually. If the app fails, try an RFID card. If you're using BMW Charging, check that your payment method is current in the My BMW app.

5. 5

   Restart the charger if possible

   Some chargers have a stop/reset button on the screen. Unplug, wait 30 seconds, and try again. If the charger has two cables, try the other connector. Check the charger's screen for error messages or an out-of-service notice.

6. 6

   Move to a different charger if the problem persists

   If nothing works after two attempts, the charger is likely faulty. Use the My BMW app or a charging map to find the next nearest station. Report the broken charger through the network's app to help other drivers.

BMW i4 Charging Payment Failed? How to Fix It Now

You're at the charger, the CCS2 cable is plugged into your BMW i4, but payment won't go through. Maybe Plug & Charge didn't kick in, the app is throwing errors, or your card was declined. Here's how to sort it out and start charging.

Symptoms

• Plug & Charge doesn't activate when you connect the CCS2 cable
• BMW Charging shows a payment error in the My BMW app
• The charger screen says authentication failed or payment declined
• Your RFID card is not recognized at this charging station
• Contactless card payment at the charger terminal is rejected

What to Do

1. 1

   Check if Plug & Charge is set up in the My BMW app

   Open the My BMW app, go to your charging settings, and verify that Plug & Charge is enabled and linked to an active payment method. If you see a setup prompt, complete it before trying again.

2. 2

   Update your payment method in BMW Charging

   In the My BMW app, navigate to your BMW Charging account and check your stored payment card. Update it if it's expired or recently replaced. The change should take effect within a few minutes.

3. 3

   Try the charging network's own app

   Identify which company operates the charger (the logo is usually on the unit). Download their app, create an account, add a payment method, and start the session through their app instead of BMW Charging.

4. 4

   Use a different RFID card or contactless payment

   If you have another RFID card from a different network, try that. Some chargers also accept contactless debit or credit cards. Look for a payment terminal on the charger, usually near the screen.

5. 5

   Try a different charger at the same station or a nearby station

   Sometimes a single charger's payment terminal malfunctions while others work fine. Try the next unit over. If the whole station is problematic, use iDrive navigation to find an alternative station nearby.

BMW i4 Charging Slower Than Expected? Fixes Here

Your BMW i4 eDrive40 supports up to 205 kW DC fast charging, but real-world speeds often fall short. Several factors specific to the i4's 80.7 kWh battery and 400V architecture can limit charging power. Here's how to diagnose and fix slow charging on your i4.

Symptoms

• DC charging speed stays well below 205 kW even at a high-power charger
• Charging curve drops sharply before reaching 60% state of charge
• AC charging at home or destination chargers maxes out at 3.6 kW instead of 11 kW
• iDrive curved display shows a lower charging rate than the charger's rated output
• Estimated charging time on the iDrive screen is much longer than expected

What to Do

1. 1

   Use iDrive navigation to route to your charging stop

   Enter the charging station as a waypoint or destination in iDrive. The i4 will automatically precondition the battery while you drive, warming it to the ideal temperature for fast charging. This alone can double your charging speed in cold weather.

2. 2

   Arrive at the charger with a lower state of charge

   The i4 charges fastest between 10% and 50%. If possible, plan your stop so you arrive closer to 10-20%. The difference between arriving at 15% versus 50% can save significant time.

3. 3

   Choose a charger stall that isn't sharing power

   Look at the charger setup. If two CCS2 cables come from one cabinet, pick a stall where the neighboring connector is free. Some stations label paired stalls with A/B designations.

4. 4

   Check your AC charging setup at home

   Open the My BMW app and look at the charging details during an AC session. If you're only getting 3.6 kW, your installation likely provides single-phase power. Ask your electrician about a three-phase connection to unlock the full 11 kW.

5. 5

   Check the charging status on the iDrive curved display

   While charging, the iDrive screen shows current power, estimated time remaining, and battery temperature. If power is low and battery temperature is also low, the car is still warming the pack. Give it a few minutes to ramp up.

6. 6

   Unplug at 80% and drive to the next charger if needed

   Charging from 80% to 100% on DC can take as long as 10% to 80%. On road trips, it's almost always faster to charge to 80%, drive, and stop again rather than waiting for a full charge.

Pricing confusion at the charger

Lidl charging policies vary by country and store. Some locations have promotional rates, while others charge standard per-kWh fees. The rules can change without much notice.

Symptoms

• Charging session costs more than expected
• Different Lidl stores seem to have different pricing
• Session stops after a time limit you did not expect
• App shows different terms than what you experienced last time

How to Fix It

1. 1

   Check the pricing terms at the specific store

   Pricing varies by location and country. Look at the signage near the charger or check the app before you start. Do not assume the same terms apply at all Lidl stores.

2. 2

   Set a timer on your phone

   If the location has a time limit, start a timer when you begin charging so you know when to return to your car.

3. 3

   Check if idle fees apply

   Some Lidl locations charge idle fees if your car remains plugged in after charging completes. Move your car promptly when the session ends.

4. 4

   Do not rely on supermarket chargers for a full charge

   Supermarket charging is best for a quick top-up while shopping. If you need to charge from low battery to 80%, plan for a dedicated fast charging station where you can stay longer without restrictions.

Charger occupied by ICE vehicles

Non-electric cars park in the EV charging spots because they are close to the store entrance. This is a persistent problem at supermarket locations.

Symptoms

• Petrol or diesel car parked in the marked EV charging bay
• Car parked so close to the charger that you cannot access the cable
• All EV spots taken by non-electric vehicles
• Shopping cart corral or delivery truck blocking access to the charger

How to Fix It

1. 1

   Check if the parking is enforced

   Some Lidl locations have clear EV-only signage with towing warnings. Others just have painted markings that are easy to ignore. If there is a parking management company sign, you can report the ICE vehicle.

2. 2

   Ask at the Lidl store

   Store staff may be willing to make an announcement. They deal with parking issues regularly and some stores have processes for this.

3. 3

   Wait or shop first

   Supermarket parking turns over quickly. A 20-minute shopping trip may be enough for the spot to clear.

4. 4

   Find the nearest alternative

   Check for another Lidl or a nearby public charger. In urban areas, there is often another option within a few minutes.

Charging power reduced during peak store hours

The charger delivers noticeably less power during busy shopping times. The station may share its electrical supply with the store itself, reducing available power for EV charging.

Symptoms

• Charging speed is significantly slower during Saturday morning or lunch rush
• Dashboard shows 30 to 50 kW at a charger rated for 150 kW
• Speed improves noticeably during quieter hours
• Two cars charging simultaneously both receive low power

How to Fix It

1. 1

   Check your battery level and temperature first

   Before blaming the charger, confirm your battery is not above 80% (where speed drops naturally) and not cold. These are the most common reasons for slow charging regardless of location.

2. 2

   Try charging during off-peak hours

   If your schedule allows, charge early morning or in the evening when the store is less busy. Power allocation to the charger may increase when store demand drops.

3. 3

   Check if another vehicle is sharing the power unit

   Some Lidl chargers share power between two connectors. If both are in use, each vehicle gets roughly half the rated power. If one car finishes, your speed may increase.

4. 4

   Accept the lower speed if you are shopping anyway

   Even at 50 kW, you gain about 50 km of range every 10 minutes. If you are shopping for 30 minutes, that is still a meaningful top-up.

App needed for troubleshooting but not normally required

Lidl chargers generally work with contactless payment or a charging card. But when something goes wrong, you may need the operator's app to diagnose the problem or start a session manually.

Symptoms

• Contactless payment failed and there is no other way to start
• Charger shows an error code you do not understand
• You want to check real-time status but the charger screen is unhelpful
• QR code on the charger leads to an app you do not have installed

How to Fix It

1. 1

   Scan the QR code on the charger

   This usually opens the operator's web interface or app store page. Lidl chargers are operated by different companies depending on the country (Compleo, Allego, E.ON, and others).

2. 2

   Note the operator name on the charger

   The charging operator is printed on the charger unit, usually near the base or on the payment terminal. Search for their app if you need to start a session or report a fault.

3. 3

   Try a roaming app

   Apps like Chargemap, Shell Recharge, or Plugsurfing often have roaming access to Lidl chargers. If the contactless reader is broken, starting through a roaming app may work.

4. 4

   Call the support number on the charger

   There is almost always a phone number on the charger unit for the operator's helpline. They can sometimes start or reset a session remotely.

Charger placement blocks adjacent parking spots

Some Lidl charger installations make it difficult to park in adjacent spots when a car is plugged in. The cable or the charger unit itself can obstruct neighboring bays.

Symptoms

• Your charging cable stretches across the next parking spot
• Parked car at the charger blocks you from entering the adjacent bay
• Cable does not reach your charge port without parking at an awkward angle
• Other shoppers complain about the cable crossing the walkway

How to Fix It

1. 1

   Park with your charge port closest to the charger

   Know which side of your car the charge port is on. If possible, pull in from the direction that puts the port nearest to the cable. This keeps the cable short and out of the way.

2. 2

   Route the cable over your car if needed

   If the cable must cross to the opposite side, drape it over the hood or roof rather than across the ground where people walk. Most DC cables are long enough for this.

3. 3

   Use the spot that causes the least obstruction

   If multiple charging spots are available, choose the one where your charge port alignment minimizes cable stretch across other bays.

4. 4

   Be mindful of the time limit

   Do not leave your car plugged in longer than necessary. In a tight parking lot, a plugged-in car blocking adjacent spots is more frustrating than one that is simply parked.