Audi e-tron GT Charging at Iberdrola

Audi e-tron GT Charger Won't Start Charging

You have plugged in your e-tron GT, but nothing happens. The MMI screen stays silent or shows an error. The e-tron GT has two charge ports, one on the left rear for AC and one on the right rear for DC, which can add confusion. This is frustrating, but it is almost always fixable on the spot.

Symptoms

• CCS2 or Type 2 connector plugged in but no charging indicator on the MMI touchscreen
• Charger screen shows 'Waiting for vehicle' or stays on the start screen
• e-tron GT charge port LED blinks but charging never begins
• Authentication succeeds on the charger but the session fails to start
• Plugged into the wrong charge port for the type of charging

What to Do

1. 1

   Verify you are using the correct charge port

   For DC fast charging, use the charge port on the right rear of the car. For AC charging with a Type 2 cable, use the charge port on the left rear. Using the wrong port is the most common cause of a failed start on the e-tron GT.

2. 2

   Check for a charging schedule or departure timer

   On the MMI touchscreen, go to the e-tron charging settings. If a timer or departure schedule is active, switch it to charge immediately or turn off the timer. You can also check the myAudi app for active schedules.

3. 3

   Unplug and reconnect firmly

   Remove the connector, wait 10 seconds, then reinsert it firmly into the correct charge port until you hear a clear click. Watch the charge port LED for a steady response.

4. 4

   Restart the charger session

   On the charger, end the current session if one is active. Then start a new session by tapping your RFID card, using contactless payment, or restarting in the charger operator's app.

5. 5

   Reboot the MMI system

   Press and hold the power button on the MMI touchscreen for about 10 seconds until the screen goes dark and restarts. Once it is back, try plugging in again. This resets the charging communication on the car's side.

6. 6

   Try a different charger

   If the station has multiple stalls, move to a different one. Some chargers have firmware issues that cause 800V handshake failures. A different unit at the same station may work fine.

Audi e-tron GT Charging Payment Failed at Station

You are at the charger, your e-tron GT is plugged in, but the payment will not go through. The charger shows an error or just sits there waiting. Payment failures at public chargers are common and usually have nothing to do with your car. Here is how to get charging.

Symptoms

• Charger displays 'Payment failed' or 'Authorization error' after tapping your card
• RFID card is not recognized by the charger's reader
• myAudi or Audi charging app shows an error when trying to start a remote session
• Plug & Charge does not activate after plugging in the CCS2 connector on the right rear
• Contactless payment terminal on the charger rejects your bank card

What to Do

1. 1

   Try a different payment method

   If your RFID card failed, try contactless with your bank card or phone. If contactless failed, try the charger operator's app. Having two or three payment options gives you the best chance of getting going.

2. 2

   Check the myAudi app

   Open the myAudi app on your phone. Make sure your Audi charging account is active, your payment method is valid, and Plug & Charge is enabled if you want to use it. Try starting the session remotely through the app.

3. 3

   Scan the charger's QR code

   Most public chargers have a QR code on the unit. Scanning it with your phone's camera opens the operator's payment page. You can usually pay with a credit card through the browser without downloading an app.

4. 4

   Check your bank app for blocked transactions

   Open your banking app and check for any flagged or blocked transactions. Some banks require you to approve the charge manually. If you see a notification, approve it and try the payment again.

5. 5

   Try Plug & Charge if available

   If the charger supports Plug & Charge and your e-tron GT has it activated through the myAudi app, simply unplug and replug the CCS2 connector into the right rear charge port. The payment should authorize automatically through the cable.

6. 6

   Move to a different charger

   If nothing works at this station, the charger's payment system may be down entirely. Find a nearby alternative using the myAudi app or the e-tron GT's built-in charger finder on the MMI touchscreen.

Audi e-tron GT Charging Slower Than Expected

You plugged in your e-tron GT expecting 270 kW and the MMI touchscreen shows 50 kW. With an 800V architecture designed for ultra-fast charging, this is especially frustrating. Slow charging on the e-tron GT is almost never a defect. It is usually the charger's capability, the battery temperature, or a mismatch between the station's voltage and the car's 800V system.

Symptoms

• DC fast charging speed well below the 270 kW maximum shown on the MMI touchscreen
• AC home charging stuck at 3-4 kW instead of the full 11 kW or optional 22 kW
• Charging speed drops significantly after reaching 50-60% state of charge
• The e-tron GT charges at similar speeds to 400V vehicles despite having 800V architecture
• MMI display shows lower power than the charger's rated output

What to Do

1. 1

   Verify the charger supports 800V and high power

   Check the charger's label or the operator's app for the maximum power output and voltage. For the e-tron GT to reach its peak 270 kW, you need a charger rated for at least 270 kW at 800V. A 150 kW or 400V charger will work but at much lower speeds.

2. 2

   Check the battery temperature

   Look at the charging screen on the MMI touchscreen. If the battery is cold, use the navigation system to route to the fast charger. The e-tron GT will precondition the battery on the way using its heat pump. If you are already at the charger, driving for 15-20 minutes and returning can help.

3. 3

   Check your state of charge

   Look at the digital instrument cluster or MMI screen. If you are above 80%, the slower speed is expected. For the fastest charging, arrive at the charger between 5-20% and charge to 80%.

4. 4

   Verify the charger is not sharing power

   Look at the charger unit. If there are two cables and someone is using the other one, you may be sharing power. Move to an unoccupied charger if one is available.

5. 5

   Check the AC charge current setting

   On the MMI touchscreen, go to the e-tron charging settings. Make sure the AC charge current is set to maximum. If you have the optional 22 kW onboard charger, verify your wallbox supports it.

6. 6

   Try a different charger

   If the speed is still low, the charger itself may be degraded or faulty. Look for Ionity, Electrify America, or other 350 kW networks that support 800V to get the best speeds from your e-tron GT.

App defaults to Spanish

The Iberdrola app opens in Spanish regardless of your phone's language setting. Finding the language switch can be confusing if you do not read Spanish.

Symptoms

• All app text is in Spanish after installation
• Language setting is not obvious in the menus
• Error messages and charger instructions appear only in Spanish
• Switching your phone's language does not change the app

How to Fix It

1. 1

   Open the app settings and look for 'Idioma'

   'Idioma' means 'Language' in Spanish. It is usually under the profile or settings menu (gear icon). Tap it and select English or your preferred language.

2. 2

   Check the profile or account section

   Some versions of the Iberdrola app place the language selector inside the user profile rather than in general settings. Look for your name or account icon at the top of the screen.

3. 3

   Update the app to the latest version

   Iberdrola has been improving multi-language support. Older versions may not have your language available. Update from the App Store or Google Play.

4. 4

   Use a roaming app as a backup

   If the language barrier is too frustrating, roaming apps like Chargemap, Shell Recharge, or Electropass work at many Iberdrola stations and offer broader language support.

Contactless payment session timeout

After tapping your card on an Iberdrola charger, there is a short window to plug in the cable and start charging. If you take too long, the session times out and you need to tap again.

Symptoms

• You tapped your card but by the time you connected the cable, nothing happened
• Charger screen shows 'Session expired' or returns to the start screen
• You were charged a pre-authorization but no energy was delivered
• The charger seemed ready but then went back to idle

How to Fix It

1. 1

   Plug in the cable first, then tap your card

   At Iberdrola stations, connect the cable to your vehicle before tapping your contactless card. This gives the charger the best chance to start immediately after authentication.

2. 2

   Tap your card again and act quickly

   After the tap, you typically have 60 to 90 seconds to complete the connection. If you missed the window, tap again. The pre-authorization from the first attempt will be released.

3. 3

   Use the Iberdrola app instead

   The app does not have the same time pressure. You can connect the cable, open the app, select the charger, and start at your own pace.

4. 4

   Check your bank statement for ghost charges

   Failed contactless attempts may show a pre-authorization hold. These are not actual charges and typically release within 3 to 7 business days. Contact your bank if they persist.

Confusing signage at gas station locations

Some Iberdrola chargers are located at gas stations (Repsol, Cepsa, or others). The EV charging area may not be clearly separated from the fuel pumps, and signage can be confusing.

Symptoms

• You cannot find the EV chargers at the gas station
• GPS directs you to the fuel pumps instead of the charging area
• Signage points to 'carga' or 'recarga' but the direction is unclear
• The charging spots are behind the gas station building or in an overflow lot

How to Fix It

1. 1

   Look for the charging area separate from the fuel pumps

   EV chargers at gas stations are almost always in a dedicated area away from the fuel pumps. Look for tall charger cabinets (about 2 meters high) rather than fuel dispensers.

2. 2

   Drive past the fuel pump area

   The charging area is often behind the main building, in a side lot, or at the far end of the property. Drive through the station slowly and look for the Iberdrola or charging network signage.

3. 3

   Ask the gas station attendant

   If the station has staff, ask where the electric charging points are. In Spanish, 'Donde estan los cargadores electricos?' gets the point across.

4. 4

   Check the Iberdrola app for station photos

   The station detail page in the Iberdrola app sometimes includes photos or access instructions that help you find the chargers within a larger gas station complex.

Mix of slow and fast chargers at the same station

Some Iberdrola stations have both AC chargers (7 to 22 kW) and DC fast chargers (50 to 350 kW) next to each other. It is easy to plug into a slow charger by mistake if you are not paying attention.

Symptoms

• You expected fast charging but your dashboard shows only 7 or 22 kW
• The charger you plugged into looks smaller than the others at the station
• You used a Type 2 cable instead of a CCS2 connector
• The charging session is going to take hours instead of minutes

How to Fix It

1. 1

   Check the charger label for power output

   Iberdrola chargers display their rated power (e.g., 50 kW, 150 kW, 350 kW) on the unit. Look for this label before plugging in. AC chargers (7 to 22 kW) are typically smaller and have Type 2 sockets.

2. 2

   Use the CCS2 connector for fast charging

   The CCS2 connector is the large combined plug for DC fast charging. If you used the smaller Type 2 plug (round with pins), you are on AC and will charge slowly.

3. 3

   Check the Iberdrola app for charger details

   The app shows each charger unit's power level at a station. Before plugging in, confirm which unit is the high-power DC charger.

4. 4

   Unplug and move to the fast charger

   If you accidentally started an AC session, stop the session in the app, unplug, and move to the DC fast charger. You will not be charged a penalty for a short session.

Power delivery varies by time of day

Some Iberdrola stations deliver noticeably less power during peak grid hours (typically early evening). This is due to grid constraints, not a charger fault.

Symptoms

• Charging speed is significantly lower in the evening than the same station delivered in the morning
• Speed starts high but drops during peak hours even at low battery levels
• Other vehicles at the station also show reduced speeds at the same time
• The charger does not reach its rated power despite your vehicle supporting it

How to Fix It

1. 1

   Check your battery level first

   The most common reason for reduced charging speed is a battery above 60 to 80% state of charge. Your vehicle limits the charging rate at higher battery levels regardless of the charger's capability.

2. 2

   Try charging during off-peak hours

   If your schedule allows, charge during late evening (after 10 PM) or early morning. Grid demand is lower and the station can deliver its full rated power.

3. 3

   Check for power sharing between chargers

   If multiple chargers are in use at the same station, they may share a grid connection. Charging when fewer vehicles are plugged in can improve your speed.

4. 4

   Try a different station nearby

   Not all Iberdrola stations have the same grid connection. A station a few kilometers away may have a better power supply and deliver higher speeds during peak hours.

5. 5

   Accept the reduced speed if you are above 60%

   If your battery is above 60%, the speed reduction is mostly from your vehicle's battery management, not the grid. This is normal and protects your battery's long-term health.