Renault Scenic E-Tech Charging at Tesla Supercharger

Renault Scenic E-Tech Electric Charger Won't Start

Your Renault Scenic E-Tech is connected to a charger, but the session will not start. The OpenR display shows nothing, the charger sits idle, or you see an error. This is one of the most common problems at public charging stations, and it usually has a straightforward solution.

Symptoms

• The charger display stays on 'connect vehicle' after plugging in
• The OpenR display does not show any charging activity
• The Scenic's charge port light does not illuminate
• An error code appears on the charger screen
• The CCS2 connector does not click into the port

What to Do

1. 1

   Unlock the car and open the charge port

   Ensure the Scenic is unlocked. Press the charge port flap to open it fully. The port is on the right side of the car.

2. 2

   Insert the connector until it clicks

   Push the CCS2 or Type 2 connector straight into the port. A firm click and the charge port light illuminating confirm a good connection.

3. 3

   Authenticate at the charger

   Tap your RFID card, start the session in your charging app, or use contactless payment. Wait for the charger screen to confirm before expecting power flow.

4. 4

   Check the OpenR display for scheduling conflicts

   In the OpenR display, go to EV settings and look for charging schedules. If one is set, disable it to allow immediate charging.

5. 5

   Disconnect and retry

   Remove the cable, wait 10 seconds, and reconnect. This resets the communication between the Scenic and the charger.

6. 6

   Move to another charger

   If the charger still will not start, it is likely broken. Try a different stall or station and report the faulty unit through the network app.

Renault Scenic E-Tech Charging Payment Failed: Fix

Your Renault Scenic E-Tech is plugged in, but the charger will not accept your payment. RFID card not recognized, app throwing errors, or bank card declined. This is not a car problem, but it keeps you from charging. Here is how to work around it.

Symptoms

• The charger displays 'authentication failed' or 'payment declined'
• Your RFID card gets no response from the charger reader
• The charging app fails when trying to start a session
• Contactless bank card is declined at the charger terminal
• The charger prompts for payment but none of your methods work

What to Do

1. 1

   Try a different payment method

   If your RFID fails, try the charging app. If the app fails, try contactless bank card. Most chargers accept multiple payment options.

2. 2

   Verify your account and payment details

   Open the charging app and check that your payment method is current. For prepaid accounts, ensure sufficient balance.

3. 3

   Check which networks this charger supports

   Look at the charger for logos of accepted providers. If your provider is not listed, you need ad-hoc payment.

4. 4

   Scan the QR code for ad-hoc payment

   Most European chargers have a QR code. Scan it with your phone to open a browser-based payment page. Pay with any credit or debit card, no app required.

5. 5

   Cancel and retry

   If payment seemed to work but charging did not start, cancel the session and try again. A fresh authorization attempt can resolve intermittent failures.

6. 6

   Call the network support line

   Most chargers display a support phone number. The operator can sometimes start sessions remotely or diagnose the payment issue.

Renault Scenic E-Tech Charging Slow: How to Fix It

Your Renault Scenic E-Tech Long Range supports up to 150kW DC fast charging, which should make road trips manageable. But if the OpenR display shows much lower numbers, your stops are taking longer than they need to. Here is what limits the Scenic's charging speed and how to fix it.

Symptoms

• DC charging power shown on the OpenR display is well below 150kW
• Charging the 87kWh battery takes significantly longer than expected
• Speed drops sharply above 70% state of charge
• AC charging is stuck at 11kW even at a faster AC station
• The OpenR display shows a battery temperature or conditioning message

What to Do

1. 1

   Check charging power on the OpenR display

   The Scenic's OpenR display shows the current kW, battery temperature, and estimated time. Compare the kW figure to the charger's rated output to identify the bottleneck.

2. 2

   Precondition the battery before arriving

   Set the charging station as your destination in the Scenic's navigation system. The car will automatically warm the battery to the right temperature while driving, which is especially important in cold weather.

3. 3

   Find a charger rated at 150kW or more

   Use the My Renault app or a charger map to locate high-power CCS2 stations. Ionity and Fastned locations typically offer chargers that can deliver the Scenic's full 150kW.

4. 4

   Pick an unshared stall

   At charging parks with paired stalls, choose a pair where the other stall is free. This avoids power sharing and gives the Scenic full access to the charger's output.

5. 5

   Charge between 10% and 80%

   Plan stops to arrive between 10% and 15% and leave at 80%. With 87kWh of capacity, 80% gives you substantial range while keeping each stop fast.

6. 6

   Check for software updates

   Renault releases updates that can improve charging performance. Check the OpenR display for available updates or ask at your Renault dealer.

Non-Tesla vehicle cannot find the station in the Tesla app

You arrive at a Supercharger with your non-Tesla EV but the station does not appear in the Tesla app, or it shows as Tesla-only.

Symptoms

• Tesla app shows the station but does not list it as open to other brands
• Station appears on the map but the 'Start Charging' button is grayed out
• App says 'This location is not available for your vehicle'
• You can see other non-Tesla vehicles charging but the app will not let you start

How to Fix It

1. 1

   Confirm the station is open to non-Tesla vehicles

   Not all Supercharger locations are open to other brands. In the Tesla app, look for stations marked with a label indicating non-Tesla access. If there is no such label, the station is Tesla-only.

2. 2

   Update the Tesla app

   Tesla frequently adds new non-Tesla locations. If your app is outdated, recently opened stations may not appear as accessible. Update to the latest version.

3. 3

   Check your Tesla account setup

   You need a Tesla account with a valid payment method added, even if you do not own a Tesla. Open the app, go to your account settings, and confirm a credit or debit card is saved.

4. 4

   Try selecting the specific stall number

   After plugging in, open the Tesla app, select the station, and tap the stall number that matches the one you plugged into. The stall number is printed on the charger post.

5. 5

   Restart the Tesla app

   Force-close and reopen the app. Location and station data sometimes fails to load correctly on the first attempt.

Payment hold is larger than expected

Tesla places a pre-authorization hold on your payment method when you start a Supercharger session. This hold can be surprisingly large and may temporarily reduce your available balance.

Symptoms

• Bank notification shows a hold of 50 to 120 EUR before charging begins
• Available balance on your debit card drops significantly
• Multiple holds appear from previous sessions that have not been released yet
• Hold amount does not match the actual charging cost

How to Fix It

1. 1

   Understand that holds are temporary

   Tesla pre-authorizes a fixed amount to ensure payment. The actual charge replaces the hold once the session is complete. The hold typically releases within 1 to 5 business days depending on your bank.

2. 2

   Use a credit card instead of a debit card

   Credit cards handle pre-authorization holds without affecting your available cash balance. Debit cards temporarily lock the held amount from your account.

3. 3

   Check the Tesla app for final session cost

   After charging, the Tesla app shows the actual amount you will be billed. This is always less than or equal to the pre-authorization hold.

4. 4

   Contact your bank if holds persist beyond 7 days

   If a hold has not been released after a week, contact your bank and provide the transaction reference from the Tesla app. Banks can manually release stale holds.

Session ends early or stops unexpectedly

Charging stops before reaching your target battery level. The car disconnects or the Supercharger stops delivering power mid-session.

Symptoms

• Charging stops at 80% even though you set a higher limit
• Session ends after a few minutes with no error message
• Car shows 'Charging interrupted' or 'Check charge cable'
• Supercharger light turns from green to red or flashing

How to Fix It

1. 1

   Check your charge limit setting

   Tesla vehicles default to an 80% charge limit. Non-Tesla vehicles have their own limit settings in the infotainment system. Verify you have set the limit above where charging stopped.

2. 2

   Reseat the cable connector

   Unplug the cable, inspect the connector and your vehicle's charge port for debris, and plug it back in firmly. A loose connection can cause the session to drop.

3. 3

   Try a different stall

   Individual Supercharger stalls can have intermittent faults. Move to another stall, preferably one that is not paired with an active session (stalls sharing a power cabinet are usually labeled with paired numbers like 1A/1B).

4. 4

   Check for idle fees

   If you reached your charge limit and did not unplug promptly, Tesla may have ended the session and started idle fees. Check the Tesla app for notifications.

5. 5

   Restart your vehicle

   For non-Tesla vehicles, turn the car off completely, wait 30 seconds, and turn it back on. Then plug in again. Some vehicles need a restart to clear communication errors with the Supercharger.

Reduced charging speed due to power sharing

Your charging speed is significantly lower than the station's advertised maximum. This often happens because Supercharger stalls share power with a paired stall.

Symptoms

• Charging at 60 to 80 kW at a station rated for 250 kW
• Speed dropped when another vehicle plugged in at a nearby stall
• Speed is much lower than you got at the same station previously
• One stall charges fast while the paired stall is very slow

How to Fix It

1. 1

   Move to an unpaired stall

   Tesla Supercharger stalls are paired (for example, 1A and 1B share a power cabinet). If someone is using 1A, stall 1B will be slower. Choose a stall where neither paired unit is occupied.

2. 2

   Look at the stall labels

   Paired stalls usually share a number with A/B suffixes, or are directly adjacent. At V3 Superchargers (250 kW), power sharing is less of an issue than at older V2 stations (150 kW).

3. 3

   Check your battery temperature

   Tesla vehicles precondition the battery automatically when navigating to a Supercharger. If you did not use Tesla navigation (or you drive a non-Tesla), the battery may be cold and limiting charge speed on its own.

4. 4

   Arrive with a lower state of charge

   Charging speed decreases as the battery fills. For the fastest stop, arrive between 5 and 20% if you can do so safely. The difference in charge speed between arriving at 10% versus 40% is significant.

Non-Tesla vehicle CCS2 connector issues

At Supercharger stations open to non-Tesla vehicles, the CCS2 connector may not work correctly with your car. In Europe, open Supercharger stations have native CCS2 cables, so no adapter is needed.

Symptoms

• The CCS2 connector does not lock into your vehicle's charge port
• Session starts but drops after a few seconds
• Tesla app does not recognize your vehicle after plugging in
• The connector fits but no power is delivered

How to Fix It

1. 1

   Make sure you are using the CCS2 cable, not the Tesla connector

   Open Supercharger stations in Europe have separate CCS2 cables alongside Tesla connectors, or dedicated CCS2 posts. Use the CCS2 cable for non-Tesla vehicles.

2. 2

   Push the connector in firmly until it clicks

   CCS2 connectors need a firm push to fully seat and lock. If the connector is loose, the charger cannot communicate with your vehicle.

3. 3

   Start the session through the Tesla app

   Select the correct stall number in the Tesla app and start the session. The stall number is printed on the charger post. It must match exactly.

4. 4

   Try a different stall

   Individual stalls can have faulty connectors. Move to another stall, preferably one that is not paired with an active session.

5. 5

   Check vehicle compatibility

   Not all non-Tesla vehicles work perfectly at every Supercharger station. If your vehicle repeatedly fails to connect, check Tesla's website or app for your vehicle's compatibility status.