Renault 5 E-Tech Charging at Tesla Supercharger

Renault 5 E-Tech Charger Will Not Start a Session

You are at the charger, the connector is in your Renault 5, but nothing happens. The screen stays idle, or you get an error message and the session never begins. This is one of the most common frustrations at public chargers, and it is almost always fixable on the spot.

Symptoms

• Charger screen stays on the welcome page after plugging in
• Charger shows an error code and returns to the start screen
• Charge port light on the Renault 5 does not illuminate or flashes red
• Connector clicks in but the car does not acknowledge the connection
• Charger displays 'Vehicle not detected' or 'Communication error'

What to Do

1. 1

   Reinsert the connector firmly

   Remove the connector from the Renault 5, check for debris or moisture in the charge port, and push the connector back in straight and firm until you hear a click. The charge port indicator should light up.

2. 2

   Open the charge port flap completely

   Make sure the fuel cap-style flap at the right rear is fully open and not obstructing the connector. If it is stuck in cold weather, gently push it or use warm water to clear ice. Do not force it.

3. 3

   Check that the car is ready to charge

   Verify the Renault 5 is in Park. On the OpenR Link screen, check the charging settings for any scheduled charging that might block immediate charging. Disable the schedule if you need to charge now.

4. 4

   Authenticate with the charger

   Tap your RFID card on the charger's reader, start the session through the operator's app, or use contactless payment. Make sure you select the correct stall number if using an app. Wait for the charger screen to confirm authorization.

5. 5

   Try a different stall

   If the charger still will not start after reinserting the connector and authenticating, the stall may be faulty. Try a different stall at the same station. If all stalls fail, find the nearest alternative using Google Maps on the OpenR Link screen.

6. 6

   Lock and unlock the car

   Locking and unlocking the Renault 5 with the key fob or the MY Renault app can reset the charge port communication. After unlocking, open the charge port flap and try plugging in again.

Renault 5 E-Tech Charging Payment Failed at Station

You are at the charger, your Renault 5 is plugged in, but the payment will not go through. The charger says 'Authorization failed' or just does nothing after you tap your card. Payment problems are one of the most common reasons a charge never starts, and you can usually fix them in a minute or two.

Symptoms

• Charger screen shows 'Authorization failed' or 'Payment declined' after tapping a card
• Charger app shows an error when trying to start a session
• Contactless bank card is declined at the charger terminal
• RFID card tap produces no response from the charger
• Charger accepts payment but the session ends immediately with zero kWh

What to Do

1. 1

   Try the charger operator's app

   Look for the operator name on the charger (Ionity, Shell Recharge, Allego, Fastned, etc.). Download their app if you do not have it, add a payment method, and start the session. Double-check that you selected the correct stall number.

2. 2

   Try a different payment method

   If your RFID card failed, try contactless with your bank card or phone. If contactless failed, try an RFID card or the operator's app. Having at least two options means you are rarely stuck.

3. 3

   Check your bank card balance

   Open your banking app and confirm you have enough available balance for the pre-authorization hold. Previous charging sessions may have pending holds that temporarily reduce your available funds.

4. 4

   Check your charging service subscription

   If you use a Mobilize or roaming charging service, open the MY Renault app and verify your subscription is active and the payment method is valid. Renew or update it if needed.

5. 5

   Reset the charger

   Press the stop or reset button on the charger. Wait for it to return to the welcome screen. Unplug the connector from your Renault 5, wait 30 seconds, plug back in, and try authenticating again.

6. 6

   Move to a different stall or station

   If nothing works at this stall, try a different one at the same station. Payment terminals fail independently. If the whole station is down, use Google Maps on your OpenR Link screen to find the nearest alternative.

Renault 5 E-Tech Charging Slower Than Expected

You plugged in your Renault 5 E-Tech expecting 100 kW and the screen shows 30 kW. Or your home wallbox is delivering 3 kW instead of 11 kW. The Renault 5 has a smaller 52 kWh battery that charges efficiently when conditions are right, but a few common factors can cut the speed significantly.

Symptoms

• DC fast charging speed well below the 100 kW maximum
• AC home charging stuck at 3-4 kW instead of 11 kW
• Charging speed drops noticeably after 50-60%
• OpenR Link display shows lower power than the charger's rating
• Charging takes much longer than the estimated time shown in the MY Renault app

What to Do

1. 1

   Precondition the battery before arriving

   Use the MY Renault app or the car's climate scheduling to warm the battery before a fast charge. If you are on a road trip, driving for at least 20-30 minutes before stopping warms the battery naturally. Set your charging stop as a navigation destination in OpenR Link to activate automatic preconditioning.

2. 2

   Check your state of charge

   If you are above 80%, the slower speed is normal. For the fastest charging, arrive at the charger between 10-20% and charge to 80%. This keeps you in the Renault 5's peak charging range.

3. 3

   Verify the charger's rated power

   Look at the charger unit for its power rating. If it says 50 kW, that is the maximum you will get. For faster charging, look for chargers rated at 100 kW or higher. The MY Renault app and Google Maps (built into OpenR Link) can filter by charger speed.

4. 4

   Check if the charger is shared

   Look at the charging station. If another car is charging at the next stall on the same unit, your power may be split. Move to an unoccupied unit if one is available.

5. 5

   Check your home AC setup

   For home charging, verify whether your wallbox is wired for 3-phase. Check the Renault 5's charging settings to confirm the AC charge current is at maximum. A single-phase installation limits you to about 3.7 kW.

Non-Tesla vehicle cannot find the station in the Tesla app

You arrive at a Supercharger with your non-Tesla EV but the station does not appear in the Tesla app, or it shows as Tesla-only.

Symptoms

• Tesla app shows the station but does not list it as open to other brands
• Station appears on the map but the 'Start Charging' button is grayed out
• App says 'This location is not available for your vehicle'
• You can see other non-Tesla vehicles charging but the app will not let you start

How to Fix It

1. 1

   Confirm the station is open to non-Tesla vehicles

   Not all Supercharger locations are open to other brands. In the Tesla app, look for stations marked with a label indicating non-Tesla access. If there is no such label, the station is Tesla-only.

2. 2

   Update the Tesla app

   Tesla frequently adds new non-Tesla locations. If your app is outdated, recently opened stations may not appear as accessible. Update to the latest version.

3. 3

   Check your Tesla account setup

   You need a Tesla account with a valid payment method added, even if you do not own a Tesla. Open the app, go to your account settings, and confirm a credit or debit card is saved.

4. 4

   Try selecting the specific stall number

   After plugging in, open the Tesla app, select the station, and tap the stall number that matches the one you plugged into. The stall number is printed on the charger post.

5. 5

   Restart the Tesla app

   Force-close and reopen the app. Location and station data sometimes fails to load correctly on the first attempt.

Payment hold is larger than expected

Tesla places a pre-authorization hold on your payment method when you start a Supercharger session. This hold can be surprisingly large and may temporarily reduce your available balance.

Symptoms

• Bank notification shows a hold of 50 to 120 EUR before charging begins
• Available balance on your debit card drops significantly
• Multiple holds appear from previous sessions that have not been released yet
• Hold amount does not match the actual charging cost

How to Fix It

1. 1

   Understand that holds are temporary

   Tesla pre-authorizes a fixed amount to ensure payment. The actual charge replaces the hold once the session is complete. The hold typically releases within 1 to 5 business days depending on your bank.

2. 2

   Use a credit card instead of a debit card

   Credit cards handle pre-authorization holds without affecting your available cash balance. Debit cards temporarily lock the held amount from your account.

3. 3

   Check the Tesla app for final session cost

   After charging, the Tesla app shows the actual amount you will be billed. This is always less than or equal to the pre-authorization hold.

4. 4

   Contact your bank if holds persist beyond 7 days

   If a hold has not been released after a week, contact your bank and provide the transaction reference from the Tesla app. Banks can manually release stale holds.

Session ends early or stops unexpectedly

Charging stops before reaching your target battery level. The car disconnects or the Supercharger stops delivering power mid-session.

Symptoms

• Charging stops at 80% even though you set a higher limit
• Session ends after a few minutes with no error message
• Car shows 'Charging interrupted' or 'Check charge cable'
• Supercharger light turns from green to red or flashing

How to Fix It

1. 1

   Check your charge limit setting

   Tesla vehicles default to an 80% charge limit. Non-Tesla vehicles have their own limit settings in the infotainment system. Verify you have set the limit above where charging stopped.

2. 2

   Reseat the cable connector

   Unplug the cable, inspect the connector and your vehicle's charge port for debris, and plug it back in firmly. A loose connection can cause the session to drop.

3. 3

   Try a different stall

   Individual Supercharger stalls can have intermittent faults. Move to another stall, preferably one that is not paired with an active session (stalls sharing a power cabinet are usually labeled with paired numbers like 1A/1B).

4. 4

   Check for idle fees

   If you reached your charge limit and did not unplug promptly, Tesla may have ended the session and started idle fees. Check the Tesla app for notifications.

5. 5

   Restart your vehicle

   For non-Tesla vehicles, turn the car off completely, wait 30 seconds, and turn it back on. Then plug in again. Some vehicles need a restart to clear communication errors with the Supercharger.

Reduced charging speed due to power sharing

Your charging speed is significantly lower than the station's advertised maximum. This often happens because Supercharger stalls share power with a paired stall.

Symptoms

• Charging at 60 to 80 kW at a station rated for 250 kW
• Speed dropped when another vehicle plugged in at a nearby stall
• Speed is much lower than you got at the same station previously
• One stall charges fast while the paired stall is very slow

How to Fix It

1. 1

   Move to an unpaired stall

   Tesla Supercharger stalls are paired (for example, 1A and 1B share a power cabinet). If someone is using 1A, stall 1B will be slower. Choose a stall where neither paired unit is occupied.

2. 2

   Look at the stall labels

   Paired stalls usually share a number with A/B suffixes, or are directly adjacent. At V3 Superchargers (250 kW), power sharing is less of an issue than at older V2 stations (150 kW).

3. 3

   Check your battery temperature

   Tesla vehicles precondition the battery automatically when navigating to a Supercharger. If you did not use Tesla navigation (or you drive a non-Tesla), the battery may be cold and limiting charge speed on its own.

4. 4

   Arrive with a lower state of charge

   Charging speed decreases as the battery fills. For the fastest stop, arrive between 5 and 20% if you can do so safely. The difference in charge speed between arriving at 10% versus 40% is significant.

Non-Tesla vehicle CCS2 connector issues

At Supercharger stations open to non-Tesla vehicles, the CCS2 connector may not work correctly with your car. In Europe, open Supercharger stations have native CCS2 cables, so no adapter is needed.

Symptoms

• The CCS2 connector does not lock into your vehicle's charge port
• Session starts but drops after a few seconds
• Tesla app does not recognize your vehicle after plugging in
• The connector fits but no power is delivered

How to Fix It

1. 1

   Make sure you are using the CCS2 cable, not the Tesla connector

   Open Supercharger stations in Europe have separate CCS2 cables alongside Tesla connectors, or dedicated CCS2 posts. Use the CCS2 cable for non-Tesla vehicles.

2. 2

   Push the connector in firmly until it clicks

   CCS2 connectors need a firm push to fully seat and lock. If the connector is loose, the charger cannot communicate with your vehicle.

3. 3

   Start the session through the Tesla app

   Select the correct stall number in the Tesla app and start the session. The stall number is printed on the charger post. It must match exactly.

4. 4

   Try a different stall

   Individual stalls can have faulty connectors. Move to another stall, preferably one that is not paired with an active session.

5. 5

   Check vehicle compatibility

   Not all non-Tesla vehicles work perfectly at every Supercharger station. If your vehicle repeatedly fails to connect, check Tesla's website or app for your vehicle's compatibility status.