Porsche Taycan Charging at Iberdrola

Porsche Taycan Charger Will Not Start a Session

You are at the charger, the CCS2 connector is in, but nothing happens. The charger screen stays on the start page, or shows an error and resets. Charger startup problems on the Taycan are almost always about the connector fit, the charge port location, or authentication. Here is how to get the session going.

Symptoms

• Charger screen stays on the welcome page after plugging in
• Charger displays an error code and resets to the start screen
• Charge port light on the Taycan does not turn on or blinks red
• CCS2 connector clicks in but the car does not acknowledge it
• Charger says 'Vehicle not detected' or 'Communication error'

What to Do

1. 1

   Reinsert the CCS2 connector firmly

   Remove the connector completely, check for debris or ice in the Taycan's charge port, and reinsert it straight and firm until you hear and feel a click. The charge port light should turn on.

2. 2

   Check the charge port flap

   Make sure the charge port door on the right rear is fully open. If it is stuck, gently push it. In freezing conditions, use warm water (never force it) to free any ice. The flap must be clear of the connector path.

3. 3

   Confirm the car is in Park

   Check the PCM display to make sure the Taycan is in Park. Also check that no charging timer or schedule is blocking immediate charging. Go to Settings, then Charging, and verify that direct charging is enabled.

4. 4

   Authenticate with the charger

   Tap your RFID card, start the session in the charger operator's app, or use Porsche Charging Service through the My Porsche app. Make sure you select the correct stall number if using an app. Wait for the charger to confirm authorization before expecting the session to begin.

5. 5

   Try a different stall or station

   If the charger still will not start after reinserting the connector and authenticating, the charger may be faulty. Try a different stall at the same location. If all stalls fail, move to the nearest alternative station.

6. 6

   Restart the Taycan's infotainment system

   In rare cases, restarting the PCM can resolve communication issues. Hold down the center display button for about 10 seconds until the screen goes dark, then release. Wait for it to restart and try plugging in again.

Porsche Taycan Charging Payment Failed at Station

You are at the charger, your Taycan is plugged in, but the payment will not go through. The charger says 'Authorization failed' or the Porsche Charging Service app is not connecting. Payment issues are one of the top reasons a charging session never starts. Most of the time, the fix takes less than two minutes.

Symptoms

• Charger screen shows 'Authorization failed' or 'Payment declined'
• Porsche Charging Service does not start the session automatically
• RFID card tap produces an error or no response from the charger
• Contactless bank card is declined at the charger's payment terminal
• Charger accepts payment but the session ends immediately with zero kWh

What to Do

1. 1

   Check Porsche Charging Service status

   Open the My Porsche app and check your Charging Service contract. Make sure it is active and your payment method on file is valid. If it has expired, renew it or switch to a different payment method at the charger.

2. 2

   Try the charger operator's app

   Look for the network name on the charger (Ionity, Shell Recharge, Allego, EnBW, etc.). Open their app, add a payment method if you have not already, and start the session. Make sure the stall number in the app matches the number on the charger you are using.

3. 3

   Try a different payment method

   If your primary method fails, switch to a backup. Try a different RFID card, a different bank card for contactless, or a different charging app. Having at least two options covers most situations.

4. 4

   Check your card balance

   Open your banking app and verify you have enough available balance for the pre-authorization hold. Previous charging sessions may have pending holds that reduce your available balance temporarily.

5. 5

   Reset the charger and try again

   Press the stop or reset button on the charger. Wait for it to return to the welcome screen. Unplug the connector from your Taycan, wait 30 seconds, plug back in, and authenticate again.

6. 6

   Move to a different stall or station

   If nothing works, try a different stall at the same station. Payment terminals can fail independently. If the entire station is not processing payments, use your Taycan's PCM navigation or Google Maps to find the nearest alternative.

Porsche Taycan Charging Slower Than Expected

You plugged in your Porsche Taycan expecting 270 kW and the Porsche Communication Management screen shows 80 kW. Or your wallbox is stuck at 3 kW instead of 11 kW. The Taycan has one of the fastest charging architectures on the market, but real-world speeds depend on battery temperature, charger capability, and a few settings you can check yourself.

Symptoms

• DC fast charging speed well below the 270 kW maximum
• AC home charging stuck at 3-4 kW instead of 11 kW or 22 kW
• Charging speed drops sharply after reaching 50-60%
• PCM shows lower power than the charger's rated output
• Charging session starts fast but slows down within minutes

What to Do

1. 1

   Use Porsche navigation for preconditioning

   Enter your charging stop as a destination in the Porsche Communication Management system. The Taycan will automatically precondition the battery to the ideal temperature during the drive. This is the single most effective way to reach peak charging speeds.

2. 2

   Check if the charger supports 800V

   Look at the charger's specifications, usually printed on the unit or shown in the operator's app. Chargers rated at 350 kW (like Ionity HPC) typically support 800V. If the charger is 50 kW or 150 kW, expect lower speeds regardless of your Taycan's capability.

3. 3

   Check your state of charge

   If you are above 80%, the slower speed is by design. For the fastest charging, arrive between 5-20% and charge to 80%. The Taycan's charging curve is steepest in this range.

4. 4

   Verify your AC charging setup

   For home charging, check whether your wallbox is wired for 3-phase power. In the Taycan's charging settings on PCM, confirm the AC charge current is set to maximum. If you have the 22 kW AC option, your wallbox must also support 22 kW.

5. 5

   Try a different charger or stall

   If speeds remain low at a DC charger, move to an unoccupied stall or a different station. Some chargers degrade over time and deliver less than their rated power. The My Porsche app or Porsche Charging Service can help find 800V-capable chargers nearby.

App defaults to Spanish

The Iberdrola app opens in Spanish regardless of your phone's language setting. Finding the language switch can be confusing if you do not read Spanish.

Symptoms

• All app text is in Spanish after installation
• Language setting is not obvious in the menus
• Error messages and charger instructions appear only in Spanish
• Switching your phone's language does not change the app

How to Fix It

1. 1

   Open the app settings and look for 'Idioma'

   'Idioma' means 'Language' in Spanish. It is usually under the profile or settings menu (gear icon). Tap it and select English or your preferred language.

2. 2

   Check the profile or account section

   Some versions of the Iberdrola app place the language selector inside the user profile rather than in general settings. Look for your name or account icon at the top of the screen.

3. 3

   Update the app to the latest version

   Iberdrola has been improving multi-language support. Older versions may not have your language available. Update from the App Store or Google Play.

4. 4

   Use a roaming app as a backup

   If the language barrier is too frustrating, roaming apps like Chargemap, Shell Recharge, or Electropass work at many Iberdrola stations and offer broader language support.

Contactless payment session timeout

After tapping your card on an Iberdrola charger, there is a short window to plug in the cable and start charging. If you take too long, the session times out and you need to tap again.

Symptoms

• You tapped your card but by the time you connected the cable, nothing happened
• Charger screen shows 'Session expired' or returns to the start screen
• You were charged a pre-authorization but no energy was delivered
• The charger seemed ready but then went back to idle

How to Fix It

1. 1

   Plug in the cable first, then tap your card

   At Iberdrola stations, connect the cable to your vehicle before tapping your contactless card. This gives the charger the best chance to start immediately after authentication.

2. 2

   Tap your card again and act quickly

   After the tap, you typically have 60 to 90 seconds to complete the connection. If you missed the window, tap again. The pre-authorization from the first attempt will be released.

3. 3

   Use the Iberdrola app instead

   The app does not have the same time pressure. You can connect the cable, open the app, select the charger, and start at your own pace.

4. 4

   Check your bank statement for ghost charges

   Failed contactless attempts may show a pre-authorization hold. These are not actual charges and typically release within 3 to 7 business days. Contact your bank if they persist.

Confusing signage at gas station locations

Some Iberdrola chargers are located at gas stations (Repsol, Cepsa, or others). The EV charging area may not be clearly separated from the fuel pumps, and signage can be confusing.

Symptoms

• You cannot find the EV chargers at the gas station
• GPS directs you to the fuel pumps instead of the charging area
• Signage points to 'carga' or 'recarga' but the direction is unclear
• The charging spots are behind the gas station building or in an overflow lot

How to Fix It

1. 1

   Look for the charging area separate from the fuel pumps

   EV chargers at gas stations are almost always in a dedicated area away from the fuel pumps. Look for tall charger cabinets (about 2 meters high) rather than fuel dispensers.

2. 2

   Drive past the fuel pump area

   The charging area is often behind the main building, in a side lot, or at the far end of the property. Drive through the station slowly and look for the Iberdrola or charging network signage.

3. 3

   Ask the gas station attendant

   If the station has staff, ask where the electric charging points are. In Spanish, 'Donde estan los cargadores electricos?' gets the point across.

4. 4

   Check the Iberdrola app for station photos

   The station detail page in the Iberdrola app sometimes includes photos or access instructions that help you find the chargers within a larger gas station complex.

Mix of slow and fast chargers at the same station

Some Iberdrola stations have both AC chargers (7 to 22 kW) and DC fast chargers (50 to 350 kW) next to each other. It is easy to plug into a slow charger by mistake if you are not paying attention.

Symptoms

• You expected fast charging but your dashboard shows only 7 or 22 kW
• The charger you plugged into looks smaller than the others at the station
• You used a Type 2 cable instead of a CCS2 connector
• The charging session is going to take hours instead of minutes

How to Fix It

1. 1

   Check the charger label for power output

   Iberdrola chargers display their rated power (e.g., 50 kW, 150 kW, 350 kW) on the unit. Look for this label before plugging in. AC chargers (7 to 22 kW) are typically smaller and have Type 2 sockets.

2. 2

   Use the CCS2 connector for fast charging

   The CCS2 connector is the large combined plug for DC fast charging. If you used the smaller Type 2 plug (round with pins), you are on AC and will charge slowly.

3. 3

   Check the Iberdrola app for charger details

   The app shows each charger unit's power level at a station. Before plugging in, confirm which unit is the high-power DC charger.

4. 4

   Unplug and move to the fast charger

   If you accidentally started an AC session, stop the session in the app, unplug, and move to the DC fast charger. You will not be charged a penalty for a short session.

Power delivery varies by time of day

Some Iberdrola stations deliver noticeably less power during peak grid hours (typically early evening). This is due to grid constraints, not a charger fault.

Symptoms

• Charging speed is significantly lower in the evening than the same station delivered in the morning
• Speed starts high but drops during peak hours even at low battery levels
• Other vehicles at the station also show reduced speeds at the same time
• The charger does not reach its rated power despite your vehicle supporting it

How to Fix It

1. 1

   Check your battery level first

   The most common reason for reduced charging speed is a battery above 60 to 80% state of charge. Your vehicle limits the charging rate at higher battery levels regardless of the charger's capability.

2. 2

   Try charging during off-peak hours

   If your schedule allows, charge during late evening (after 10 PM) or early morning. Grid demand is lower and the station can deliver its full rated power.

3. 3

   Check for power sharing between chargers

   If multiple chargers are in use at the same station, they may share a grid connection. Charging when fewer vehicles are plugged in can improve your speed.

4. 4

   Try a different station nearby

   Not all Iberdrola stations have the same grid connection. A station a few kilometers away may have a better power supply and deliver higher speeds during peak hours.

5. 5

   Accept the reduced speed if you are above 60%

   If your battery is above 60%, the speed reduction is mostly from your vehicle's battery management, not the grid. This is normal and protects your battery's long-term health.