Skip to main content

This guide is for general information only. EVcourse is not affiliated with MG or REWE Charging. Charging speeds and compatibility vary by station, vehicle variant, and conditions. When in doubt, contact MG or REWE Charging support.

Troubleshooting

MG ZS EV Charging at REWE Charging

Updated March 2026

The MG ZS EV is compatible with REWE Charging chargers. Here is what you need to know about charging speed, connector fit, and how to handle common problems.

Share

Compatibility Overview

Approximate values. Actual speeds depend on temperature, battery state, and station load.

Connector match
Compatible
Car connector
CCS2
Network connectors
CCS2
Max charging speed
94 kW
10-80% estimate
37 min
Payment
app, contactless

Why Your Charging Speed May Differ

The MG ZS EV supports up to 94 kW DC charging. REWE Charging chargers deliver up to 300 kW. Your car's maximum intake is the limiting factor here, capping speed at 94 kW even on a faster charger.

  • Charging slows down above 80% state of charge on most EVs, including the MG ZS EV.
  • Cold weather reduces charging speed. Preconditioning may not be available on all MG ZS EV variants.
  • If multiple cars share the same REWE Charging station, power may be split between stalls.

MG ZS EV Charging Problems

MG ZS EV Charger Won't Start? Quick Fix Guide

You have connected the charger to your MG ZS EV but nothing happens. No power flowing, the charger is showing an error, or the car just does not respond. Before you give up and drive to another station, run through these checks. Most charging failures have a simple fix.

Symptoms

  • Charger display shows error after plugging in the CCS2 connector
  • Charge port light on the ZS EV does not illuminate
  • Car dashboard shows no indication of charging activity
  • Charger screen stays on the welcome or authentication screen
  • Type 2 AC connector locks in but charging does not begin

What to Do

  1. 1

    Check the charger display for errors or instructions

    Look at the charger screen. It will tell you if authentication is needed, if there is a fault, or if it is waiting for the vehicle. This is the fastest way to identify the problem.

  2. 2

    Remove and reinsert the connector

    Pull the CCS2 or Type 2 connector out completely, wait 10-15 seconds, and push it back in firmly. Make sure it locks into the ZS EV's front charge port.

  3. 3

    Authenticate with the charger

    Tap your RFID card, start the session in the network app, or use contactless payment. Try authenticating both before and after plugging in, as different chargers have different sequences.

  4. 4

    Check the charge port for obstructions

    Inspect the ZS EV's charge port for debris, ice, or visible damage to the pins. In winter, gently remove any ice with your hand or a soft cloth. Do not use metal tools.

  5. 5

    Turn the car off and back on

    Switch the ZS EV off completely, wait 30 seconds, then turn it on again. This resets the onboard charging system and can resolve communication glitches.

  6. 6

    Try another stall or station

    If the charger is faulty, move to another stall. If the entire station is down, find a nearby alternative using your charging app.

MG ZS EV Charging Payment Failed? Solve It Fast

Your MG ZS EV is plugged in and ready to charge, but the payment is not going through. Whether it is an RFID card, an app, or a bank card, payment failures are among the most common reasons charging sessions fail to start. Here is how to get it sorted and get on with your charge.

Symptoms

  • RFID card tap produces no response from the charger
  • Network app shows a payment declined error
  • Contactless card is rejected at the charger terminal
  • Charger asks for authentication but nothing you try works
  • Charging starts then stops within seconds due to billing error

What to Do

  1. 1

    Check what payment methods the charger accepts

    Look at the charger for payment logos, QR codes, or instructions. Identify whether it takes RFID, app payments, contactless cards, or a specific network's card only.

  2. 2

    Try the charger network's own app

    Scan the QR code on the charger or search for the network's app. Register, add a payment method, and try starting the session through the app.

  3. 3

    Try alternative payment methods

    Switch between RFID card, contactless bank card, and app-based payment. If you have a roaming provider like Plugsurfing or Shell Recharge, try their card or app.

  4. 4

    Check your bank for declined transactions

    Open your banking app to look for blocked pre-authorizations or declined charges. If the hold was blocked, you may need to approve it or use a different card.

  5. 5

    Try a different stall

    The card reader on one stall may be faulty while others work fine. Move to the next stall and try again.

  6. 6

    Find a nearby compatible charger

    If nothing works at this station, use your charging app to find an alternative. Filter by networks where your payment methods are confirmed to work.

MG ZS EV Charging Slowly? Causes and Solutions

Your MG ZS EV is taking much longer to charge than you expected. With a 94kW maximum DC speed and no battery preconditioning, the ZS EV is particularly affected by cold weather and charging conditions. Understanding these limits helps you plan better and avoid frustration at the charger.

Symptoms

  • DC fast charging power well below 94kW
  • AC charging not reaching the full 11kW
  • Very slow charging in cold or winter conditions
  • Charging speed drops significantly above 50-60% SOC
  • First fast charge of the day is much slower than subsequent ones

What to Do

  1. 1

    Verify the charger's maximum output

    Check the charger label or app for its power rating. If it is a 50kW unit, the ZS EV cannot charge faster. Look for chargers rated at 100kW or above to access the full 94kW capability.

  2. 2

    Drive longer before charging in cold weather

    Since the ZS EV has no preconditioning, the best way to warm the battery is to drive. A longer highway drive before the charger will raise the battery temperature naturally, improving DC charging speed.

  3. 3

    Charge at a lower SOC

    Arrive at the charger between 10-20% SOC for the fastest charging speeds. The ZS EV delivers its best power in the 10-50% range.

  4. 4

    Choose a stall without power sharing

    If the station shares power between stalls, pick one where the adjacent stall is empty. This gives you the full power allocation.

  5. 5

    Check your AC cable and charger

    For AC charging, verify you are using a 3-phase Type 2 cable on an 11kW charger. A single-phase connection limits you to about 3.6kW.

  6. 6

    Accept the winter speed reality

    In cold weather, the ZS EV's lack of preconditioning and heat pump means slow starts are unavoidable. Plan for longer charging stops in winter and consider parking in a heated garage when possible.

Common REWE Charging Issues

Charger occupied by non-charging vehicles

You arrive at the REWE charger and a car is parked in the charging spot without being plugged in. This is common at supermarket locations where shoppers treat EV spots as regular parking.

Symptoms

  • Charging spot is occupied by a car with no cable connected
  • ICE vehicle parked in the EV charging bay
  • Car is plugged in but session has clearly ended and the driver is inside shopping
  • All charging spots taken despite the app showing the charger as available

How to Fix It

  1. 1

    Check if the other car is actively charging

    Look at the charger display or connector. If the session has ended and the car is just parked, REWE cannot remotely move it. The app status reflects the charger, not the parking spot.

  2. 2

    Ask at the REWE customer service desk

    REWE staff can sometimes make a store announcement asking the vehicle owner to move. This works more often than you would expect.

  3. 3

    Wait briefly or shop first

    At supermarket chargers, turnover is high. Most shoppers leave within 30 to 45 minutes. Do your shopping and check again.

  4. 4

    Check for additional REWE locations nearby

    Many German cities have multiple REWE stores with chargers within a short drive. Check the app for the next closest option.

Contactless card reader not responding

You tap your debit or credit card on the reader but nothing happens. The reader does not beep, does not show a light, or shows an error briefly before resetting.

Symptoms

  • Card reader shows no response when you tap
  • Reader beeps but the screen shows an error
  • Card works at the REWE checkout inside but not at the charger
  • Contactless symbol is visible on the reader but it seems inactive

How to Fix It

  1. 1

    Hold your card flat against the reader for 3 to 5 seconds

    Some REWE charger readers are slower than store payment terminals. Hold the card still and wait for the full processing time.

  2. 2

    Remove your phone and other cards from the area

    If you hold your wallet with multiple contactless cards near the reader, it may detect interference and reject the transaction.

  3. 3

    Try the charging app instead

    If contactless is not working, start the session through the REWE charging partner app. This bypasses the physical card reader entirely.

  4. 4

    Check if the reader is physically damaged

    Supermarket chargers are exposed to shopping carts, weather, and heavy foot traffic. If the reader looks cracked or the screen is damaged, report it to REWE staff inside and try another stall if available.

Session ends due to maximum stay time limit

Your charging session stops before the battery is full because REWE enforces a maximum parking time at the charging spot. This exists to keep spots available for other shoppers.

Symptoms

  • Charging stops after 60 to 90 minutes even though the battery is not full
  • App notification says session ended due to time limit
  • You return from shopping to find the charger disconnected
  • Charger screen shows session completed despite low battery level

How to Fix It

  1. 1

    Check the posted time limit before you start

    REWE typically allows 60 to 120 minutes depending on the location. Look for signage near the charger or check the app for time restrictions at that specific store.

  2. 2

    Plan your charge around your shopping time

    At up to 300 kW, most EVs can gain 150 to 250 km of range in 30 to 45 minutes. A normal grocery run is usually enough time for a meaningful charge.

  3. 3

    Move your car if you need more time

    If you need a longer session, move your car to a regular parking spot after the time limit and start a new session if the charger is free when you return.

  4. 4

    Use REWE chargers for top-ups, not full charges

    Supermarket chargers work best for adding range while you shop, not for charging from 10% to 100%. If you need a full charge, plan for a dedicated fast charging station.

Poor mobile signal in underground or garage parking

Some REWE stores have chargers in basement or covered parking areas where mobile signal is weak. This can prevent the app from starting a session or processing contactless payments.

Symptoms

  • App shows 'No connection' or spins without loading
  • Contactless payment times out during processing
  • You cannot scan the QR code on the charger because the page will not load
  • Session starts but the app loses connection and cannot show charging status

How to Fix It

  1. 1

    Connect to REWE store WiFi if available

    Many REWE stores offer free WiFi that may reach the parking area. Check for a REWE network in your phone's WiFi settings.

  2. 2

    Walk closer to the garage entrance to start the session

    If you need the app to start the session, walk toward the exit where signal is stronger, start the session remotely, then return to your car.

  3. 3

    Use contactless payment instead of the app

    Contactless card payments are processed through the charger's built-in connection, not your phone. If the card reader works, you do not need mobile signal.

  4. 4

    Pre-load the app before entering the garage

    Open the app and navigate to the station page while you still have signal. Some apps cache enough data to start a session even with intermittent connectivity.

Charger unavailable outside store hours

You arrive at a REWE charger outside store opening hours and the charger is inaccessible or powered down. Some locations gate their parking areas or shut down chargers when the store closes.

Symptoms

  • Parking area gate is locked and you cannot reach the charger
  • Charger screen is dark and does not respond
  • App shows the charger as available but the physical location is closed
  • Barrier arm blocks entry to the parking lot after closing time

How to Fix It

  1. 1

    Check store hours before planning a charge

    REWE stores in Germany typically close between 20:00 and 22:00 on weekdays and earlier on Saturdays. Most are closed on Sundays. If the charger is behind a gate, you cannot access it outside these hours.

  2. 2

    Verify 24/7 access in the app

    Some REWE charging locations offer 24/7 access even when the store is closed. Check the station details in the app. If it does not mention 24-hour access, assume it follows store hours.

  3. 3

    Leave the parking area before the store closes

    If you are charging and the store is about to close, make sure you can exit the parking area. Some locations lock the barrier after closing, which could trap your car overnight.

  4. 4

    Find an alternative nearby charger

    Use a multi-network app like Chargemap or the EVcourse charger finder to locate a 24/7 charger nearby. Dedicated charging stations along main roads usually operate around the clock.

REWE Charging App Tips

  • REWE chargers are often operated by a charging partner (such as Allego or EWE Go). Check which app you actually need by scanning the QR code on the charger or looking at the operator logo.
  • Pre-load the station page in the app before entering a parking garage. Underground signal issues are common at REWE locations.
  • Enable session end notifications so you can move your car promptly and avoid blocking the spot for other shoppers.
  • Check the app for time limits at each specific REWE location. They vary by store and are not always posted clearly on signage.
  • If the app is not working, look for a phone number on the charger itself. The charging operator (not REWE) handles technical support.

Payment Tips

  • Contactless debit and credit cards usually work at REWE chargers without needing an app or account. Look for the contactless symbol on the card reader.
  • Pre-authorization holds can be up to 100 EUR depending on the operator. The actual charge amount replaces the hold within a few business days.
  • Some REWE charging operators offer roaming through networks like Hubject or Gireve. Your existing charging card or app from another network may work here.
  • Keep your payment card handy, not buried in your shopping bags. If the session stops unexpectedly, you may need to re-authenticate quickly.

Frequently Asked Questions

Can the MG ZS EV charge at REWE Charging?
Yes. The MG ZS EV uses a CCS2 connector, which is supported by REWE Charging chargers. Maximum charging speed will be up to 94 kW.
How long does it take to charge a MG ZS EV at REWE Charging?
Charging a MG ZS EV from 10% to 80% at REWE Charging takes approximately 37 minutes at up to 94 kW. Actual times vary depending on temperature, battery condition, and station load.
How do you pay at REWE Charging?
REWE Charging accepts app, contactless. Check the REWE Charging app or website for current pricing and subscription options.

Stuck at the charger? Open the app.

Step-by-step help for real charging problems. Log the experience. Free on iOS and Android.

Free to download · Available on iOS and Android