MG MG4 Charging at EVBox

MG MG4 Charger Won't Start? How to Fix It Now

You have plugged in your MG MG4 but nothing is happening. The charger light is blinking, the car is not responding, or you are getting an error message. This is frustrating, but most failed charging sessions have a simple fix. Let's walk through the common causes.

Symptoms

• Charger display shows an error code or red indicator
• CCS2 connector clicks in but charging does not begin
• Car dashboard shows no charging activity after plugging in
• Charger screen asks for authentication but does not accept your card or app
• Charging port light on the MG4 flashes or stays amber

What to Do

1. 1

   Check the charger screen for error messages

   Read any error codes or messages on the charger display. Common messages include 'authentication required,' 'connector error,' or 'out of service.' This tells you whether the problem is the charger or the car.

2. 2

   Unplug and replug the connector

   Remove the CCS2 or Type 2 connector completely, wait 10 seconds, and plug it back in firmly. Make sure you hear the click and the MG4's charge port light responds.

3. 3

   Authenticate again

   Re-tap your RFID card, restart the session in the app, or try contactless payment. Some chargers require you to authenticate before plugging in, others after. Try both sequences.

4. 4

   Disable scheduled charging

   On the MG4's infotainment screen, go to vehicle settings and check if scheduled charging is enabled. Turn it off temporarily to allow immediate charging.

5. 5

   Lock and unlock the car

   Use the MG4's key fob or the MG iSMART app to lock and then unlock the car. This can reset the charge port communication and clear temporary errors.

6. 6

   Try a different charger or stall

   If nothing works on this stall, try another one at the same station. If the entire station fails, the problem is likely the charger infrastructure, not your MG4.

MG MG4 Charging Payment Failed? Fix It Quickly

You are at a charger with your MG MG4 and the payment is not going through. Your card gets rejected, the app throws an error, or you cannot figure out how to pay at all. Payment issues are one of the most common reasons a charging session fails to start. Here is how to sort it out.

Symptoms

• RFID card tap does not register on the charger
• Charging app shows a payment error or insufficient funds
• Contactless bank card is declined at the charger terminal
• Charger asks for payment but you cannot find a method that works
• Session starts but stops immediately due to payment authorization failure

What to Do

1. 1

   Check which payment methods the charger accepts

   Look at the charger for logos showing accepted payment types: RFID, app, contactless card, QR code. Many chargers display the logos of compatible networks near the screen or card reader.

2. 2

   Try the network's app

   Scan the QR code on the charger or search for the network's app in your phone's app store. Many networks let you start a session through their app even without an RFID card.

3. 3

   Try a different payment method

   If your RFID card fails, try the app. If the app fails, try contactless. If you have a multi-network roaming card (like Plugsurfing or Shell Recharge), try that instead.

4. 4

   Check your card balance and bank notifications

   Open your banking app to check for declined transactions or pre-authorization holds. Contact your bank if the charger is trying to authorize a large hold that exceeds your available balance.

5. 5

   Use a roaming service

   If you do not have an account with this specific network, a roaming provider like Plugsurfing, Chargemap, or Shell Recharge may cover this charger. These services work across multiple networks with one card or app.

6. 6

   Find an alternative charger nearby

   If payment truly will not work, search for another charger nearby. Filter your charging app by your available payment methods to find a compatible station.

MG MG4 Charging Slowly? Causes and Quick Fixes

You plugged in your MG MG4 expecting fast charging, but the kW reading is disappointingly low. This is one of the most common frustrations for MG4 drivers, and it usually has a straightforward explanation. Here is what to check and how to get closer to the 142kW DC maximum your car supports.

Symptoms

• DC charging power showing well below 142kW on the charger display
• AC home or destination charging stuck below 11kW
• Estimated charging time much longer than expected
• Battery percentage climbing very slowly after 60-70% SOC
• Charging power drops significantly in cold weather

What to Do

1. 1

   Check the charger's rated power

   Look at the charger label or app to confirm its maximum output. If it is a 50kW unit, your MG4 cannot charge faster regardless of its 142kW capability.

2. 2

   Check your battery temperature and SOC

   On the MG4's instrument cluster, check your current state of charge. If you are above 70%, the taper is normal. In cold weather, use the preconditioning feature by setting the charger as your navigation destination.

3. 3

   Activate preconditioning via navigation

   Set the fast charger as your destination in the MG4's built-in navigation. This triggers battery preconditioning, warming the pack to an optimal temperature before you arrive.

4. 4

   Try a different CCS2 stall

   If the charger has multiple stalls, power may be shared between them. Try an adjacent stall or wait for other cars to finish. Some charging sites have dedicated high-power stalls.

5. 5

   Check your AC charging cable

   For AC charging, make sure you are using a cable rated for at least 11kW (3-phase, 16A). A single-phase cable limits you to about 3.6kW regardless of what the charger or car supports.

6. 6

   Verify no charging limit is set in the car

   In the MG4's settings, check if a charging current limit or maximum SOC limit has been set. A reduced AC charging current setting will cap your speed even on a capable charger.

EVBox app vs third-party operator confusion

You see an EVBox-branded charger and download the EVBox app, but the session will not start because the station is operated by a different company. Many EVBox chargers are hardware only, with a separate operator managing access and billing.

Symptoms

• EVBox app does not show the station or cannot start a session
• You created an EVBox account but the charger asks for a different app or RFID card
• Charger has EVBox branding but the screen shows a different company name
• QR code on the charger leads to a different operator's website or app

How to Fix It

1. 1

   Check the operator name on the charger screen or signage

   Look at the charger display when it is idle. The operator name is usually shown on the welcome screen. Common operators using EVBox hardware include municipalities, parking companies, and energy providers.

2. 2

   Scan the QR code on the charger

   The QR code leads to the operator's platform, not necessarily EVBox. Scan it to find out which app or website you need.

3. 3

   Try a roaming RFID card

   If you have an RFID card from Shell Recharge, Chargemap, Plugsurfing, or another roaming provider, try tapping it. Many EVBox chargers accept roaming cards regardless of who operates them.

4. 4

   Search for the station in a multi-network app

   Apps like Chargemap or Shell Recharge aggregate many operators. Search for the charger location and you should see which operator runs it and how to start a session.

5. 5

   Download the correct operator's app

   Once you know who operates the station, download their app. The EVBox app only works for chargers that EVBox operates directly.

CHAdeMO connector availability varies

Some EVBox fast chargers have both CCS2 and CHAdeMO connectors, but the CHAdeMO connector may be out of service, removed, or restricted. CHAdeMO is being phased out in Europe and availability is declining.

Symptoms

• CHAdeMO connector is physically present but does not work
• Charger screen shows CHAdeMO as 'Unavailable' or 'Out of Order'
• CHAdeMO connector has been removed and the port is capped
• App shows CHAdeMO available but the physical connector is missing

How to Fix It

1. 1

   Check the charger before relying on CHAdeMO

   If your vehicle uses CHAdeMO, visually confirm the connector is present and functional at the station before planning your stop. App data may not reflect recent hardware changes.

2. 2

   Try the CHAdeMO connector even if the app status is unclear

   Plug in and attempt to start a session. Sometimes the app shows a stale status but the connector works fine.

3. 3

   Have a CCS2 adapter as a long-term solution

   If your vehicle only has CHAdeMO (common in older Nissan Leafs and some Mitsubishi models), CHAdeMO infrastructure is shrinking across Europe. A CHAdeMO-to-CCS2 adapter may be worth investigating for your specific vehicle.

4. 4

   Filter for CHAdeMO in your charging app

   When planning a route, filter specifically for stations with verified CHAdeMO connectors. User reviews and recent check-ins are more reliable than operator listings for CHAdeMO availability.

RFID card registration process unclear

To use an RFID card at EVBox-operated stations, you may need to register the card through the EVBox platform first. The registration process is not always obvious.

Symptoms

• New RFID card does not work at the charger even after ordering it from EVBox
• Card works at other networks but not at EVBox-operated stations
• You received a card but there are no activation instructions
• Online portal asks for a card number format you do not recognize

How to Fix It

1. 1

   Check the activation email

   When you order an RFID card from EVBox, they send an activation email. Check your inbox and spam folder. The email contains a link to activate the card in your EVBox account.

2. 2

   Add the card in the EVBox app or portal

   Log in to your EVBox account (app or web portal). Navigate to 'My cards' or 'Charge cards' and add the card using the number printed on it. The card does not work until it is linked to your account.

3. 3

   Wait for activation to propagate

   After registering the card, it may take up to 24 hours for the activation to reach all chargers. If the card does not work immediately after registration, try again the next day.

4. 4

   Use the app as a backup while the card activates

   You can start sessions through the EVBox app while waiting for your RFID card to activate. Tap 'Start charging' in the app and select the charger.

Charger offline due to firmware update

EVBox periodically pushes firmware updates to their chargers. During an update, the charger is temporarily unavailable. This can happen without warning and usually lasts 10 to 30 minutes.

Symptoms

• Charger screen shows 'Updating' or 'Maintenance' message
• Charger was working a few minutes ago but now shows as offline
• App shows the charger as unavailable with no estimated return time
• Multiple chargers at the same location are all offline simultaneously

How to Fix It

1. 1

   Wait 10 to 15 minutes

   Firmware updates on EVBox chargers usually complete within 10 to 30 minutes. If the charger shows an update message, it will likely come back online shortly.

2. 2

   Try another charger at the same location

   Firmware updates sometimes roll out one unit at a time. If there are multiple chargers, others may still be operational.

3. 3

   Check the app for status updates

   The operator's app or the EVBox app may show whether the outage is a scheduled update or an unexpected fault. Scheduled updates usually have an estimated completion time.

4. 4

   Move to an alternative station if you cannot wait

   If you need to charge immediately and the update is taking longer than expected, use a multi-network app to find the nearest available charger from any network.

Power sharing between connectors reduces speed

Some EVBox fast chargers share their power output between two connectors. When both are in use, each vehicle receives roughly half the charger's maximum power.

Symptoms

• Charging speed drops by half when a second car plugs into the same unit
• Dashboard shows 75 kW at a charger rated for 150 kW
• Speed suddenly increases when the car on the other connector finishes
• One side of the charger consistently delivers more power than the other

How to Fix It

1. 1

   Check if both connectors are on the same unit

   EVBox dual-connector chargers share one power module. If both CCS2 cables come from the same physical cabinet, they share power. Two separate cabinets are two independent chargers.

2. 2

   Choose an unoccupied charger unit if available

   If multiple charger units are available, pick one where the other connector is not in use. You will get the full rated power to yourself.

3. 3

   Understand how power sharing works

   Power sharing is dynamic. The charger allocates power based on what each vehicle can accept. If the other vehicle is at 80% and barely drawing power, you may get most of the charger's output even while sharing.

4. 4

   Wait for the other car to finish

   If your speed is reduced by sharing, it will increase when the other vehicle finishes. Check your dashboard periodically. The speed change happens automatically without any action from you.

5. 5

   Check your vehicle's own limits first

   Before assuming power sharing is the issue, verify that your car is not limiting the speed due to battery temperature, state of charge above 80%, or its own maximum DC charging rate.