Mercedes-Benz EQB Charging at Orlen Charge

Mercedes-Benz EQB Charger Won't Start: Quick Fixes

You have connected your Mercedes-Benz EQB to a public charger, but the session will not start. MBUX shows nothing, the charger sits idle, and you are wondering what is wrong. This is one of the most common complaints at public chargers, and it is usually fixable on the spot.

Symptoms

• The charger screen stays on 'waiting' or 'connect vehicle' after plugging in
• MBUX does not show any charging activity
• The EQB's charge port LED does not illuminate
• The charger returns an error code after you connect
• The CCS2 connector does not click into place

What to Do

1. 1

   Unlock the EQB and open the charge port

   Ensure the car is unlocked. Press the charge port flap to open it. On some EQB models, you can also open it through the Mercedes me app.

2. 2

   Insert the connector firmly

   Push the CCS2 or Type 2 connector straight into the port until it clicks. The charge port is on the right side of the EQB. A locked connector triggers the charging protocol.

3. 3

   Authenticate at the charger

   Tap your RFID card on the charger reader, start the session in the network app, or tap your bank card on the contactless terminal. The charger needs authorization before sending power.

4. 4

   Disable scheduled charging in MBUX

   In MBUX, navigate to EV settings, then charging. If a schedule is set, switch to immediate charging so the EQB does not wait for a timer.

5. 5

   Disconnect and retry

   Unplug the cable, wait 15 seconds, and reconnect. This forces a fresh handshake between the EQB and the charger.

6. 6

   Try another charger

   If the charger remains unresponsive, it is likely out of service. Move to a different stall or station and report the faulty unit through the network's app.

Mercedes-Benz EQB Charging Payment Failed: Fix Now

You have connected your Mercedes-Benz EQB to a charger, but the payment will not go through. RFID not recognized, app error, or bank card declined. This is a charger-side issue, not an EQB problem, but it still blocks your session. Here is how to get charging.

Symptoms

• The charger displays 'authentication failed' or 'payment declined'
• Your RFID card tap produces no response
• The charging app returns an error when starting a session
• Contactless bank card payment is declined
• The charger asks for payment but no method works

What to Do

1. 1

   Try an alternative payment method

   Switch from RFID to the charging app, or from the app to a contactless bank card. Having multiple options ensures one failure does not strand you.

2. 2

   Check your account status

   Open the charging app and verify your payment method, balance, and subscription status. Fix any issues before retrying.

3. 3

   Verify the charger supports your network

   Look for provider logos on the charger. If yours is not there, you need ad-hoc payment via QR code or a different provider.

4. 4

   Scan the QR code for ad-hoc payment

   Most European chargers have a QR code that opens a browser-based payment page. Pay with any bank card, no app needed.

5. 5

   Cancel and restart the session

   If payment seemed to go through but charging did not start, cancel in the app and try again with a fresh authorization.

6. 6

   Contact the network's support

   The charger should display a phone number. The operator can sometimes authorize sessions remotely or troubleshoot payment issues.

Mercedes-Benz EQB 350+ Charging Slow: How to Fix It

Your Mercedes-Benz EQB 350+ supports up to 102kW DC fast charging, which is moderate for its class. If the MBUX display is showing far less than that, every charging stop takes longer than it should. Here is what affects the EQB's charging speed and how to improve it.

Symptoms

• DC charging power shown on MBUX is well below 102kW
• Charging the 70.5kWh battery takes significantly longer than expected
• Speed drops noticeably above 70% state of charge
• AC charging is stuck below 11kW at a faster station
• MBUX displays a battery temperature warning or conditioning indicator

What to Do

1. 1

   Check charging power in MBUX

   Open the charging status screen on MBUX. It displays current kW, battery temperature, and estimated completion time. This tells you whether the car or charger is limiting speed.

2. 2

   Precondition the battery before arriving

   Enter the charging station as a destination in MBUX navigation. The EQB will precondition the battery to optimal temperature while you drive. This is the single most effective step in cold weather.

3. 3

   Find a charger rated at 100kW or more

   Use the Mercedes me app or a charger map to locate high-power stations. Ionity, Fastned, and some Shell Recharge stations offer 100kW+ chargers.

4. 4

   Avoid power-sharing stalls

   Choose a charger pair where the adjacent stall is empty. This gives the EQB the full output of the charger.

5. 5

   Charge between 10% and 80%

   Plan stops to arrive between 10% and 15% and leave at 80%. This keeps you in the EQB's fastest charging window.

6. 6

   Check for software updates

   Mercedes releases over-the-air updates that can improve charging behavior. Check MBUX under Settings for available updates.