Mercedes-Benz EQB Charging at ChargePoint

Mercedes-Benz EQB Charger Won't Start: Quick Fixes

You have connected your Mercedes-Benz EQB to a public charger, but the session will not start. MBUX shows nothing, the charger sits idle, and you are wondering what is wrong. This is one of the most common complaints at public chargers, and it is usually fixable on the spot.

Symptoms

• The charger screen stays on 'waiting' or 'connect vehicle' after plugging in
• MBUX does not show any charging activity
• The EQB's charge port LED does not illuminate
• The charger returns an error code after you connect
• The CCS2 connector does not click into place

What to Do

1. 1

   Unlock the EQB and open the charge port

   Ensure the car is unlocked. Press the charge port flap to open it. On some EQB models, you can also open it through the Mercedes me app.

2. 2

   Insert the connector firmly

   Push the CCS2 or Type 2 connector straight into the port until it clicks. The charge port is on the right side of the EQB. A locked connector triggers the charging protocol.

3. 3

   Authenticate at the charger

   Tap your RFID card on the charger reader, start the session in the network app, or tap your bank card on the contactless terminal. The charger needs authorization before sending power.

4. 4

   Disable scheduled charging in MBUX

   In MBUX, navigate to EV settings, then charging. If a schedule is set, switch to immediate charging so the EQB does not wait for a timer.

5. 5

   Disconnect and retry

   Unplug the cable, wait 15 seconds, and reconnect. This forces a fresh handshake between the EQB and the charger.

6. 6

   Try another charger

   If the charger remains unresponsive, it is likely out of service. Move to a different stall or station and report the faulty unit through the network's app.

Mercedes-Benz EQB Charging Payment Failed: Fix Now

You have connected your Mercedes-Benz EQB to a charger, but the payment will not go through. RFID not recognized, app error, or bank card declined. This is a charger-side issue, not an EQB problem, but it still blocks your session. Here is how to get charging.

Symptoms

• The charger displays 'authentication failed' or 'payment declined'
• Your RFID card tap produces no response
• The charging app returns an error when starting a session
• Contactless bank card payment is declined
• The charger asks for payment but no method works

What to Do

1. 1

   Try an alternative payment method

   Switch from RFID to the charging app, or from the app to a contactless bank card. Having multiple options ensures one failure does not strand you.

2. 2

   Check your account status

   Open the charging app and verify your payment method, balance, and subscription status. Fix any issues before retrying.

3. 3

   Verify the charger supports your network

   Look for provider logos on the charger. If yours is not there, you need ad-hoc payment via QR code or a different provider.

4. 4

   Scan the QR code for ad-hoc payment

   Most European chargers have a QR code that opens a browser-based payment page. Pay with any bank card, no app needed.

5. 5

   Cancel and restart the session

   If payment seemed to go through but charging did not start, cancel in the app and try again with a fresh authorization.

6. 6

   Contact the network's support

   The charger should display a phone number. The operator can sometimes authorize sessions remotely or troubleshoot payment issues.

Mercedes-Benz EQB 350+ Charging Slow: How to Fix It

Your Mercedes-Benz EQB 350+ supports up to 102kW DC fast charging, which is moderate for its class. If the MBUX display is showing far less than that, every charging stop takes longer than it should. Here is what affects the EQB's charging speed and how to improve it.

Symptoms

• DC charging power shown on MBUX is well below 102kW
• Charging the 70.5kWh battery takes significantly longer than expected
• Speed drops noticeably above 70% state of charge
• AC charging is stuck below 11kW at a faster station
• MBUX displays a battery temperature warning or conditioning indicator

What to Do

1. 1

   Check charging power in MBUX

   Open the charging status screen on MBUX. It displays current kW, battery temperature, and estimated completion time. This tells you whether the car or charger is limiting speed.

2. 2

   Precondition the battery before arriving

   Enter the charging station as a destination in MBUX navigation. The EQB will precondition the battery to optimal temperature while you drive. This is the single most effective step in cold weather.

3. 3

   Find a charger rated at 100kW or more

   Use the Mercedes me app or a charger map to locate high-power stations. Ionity, Fastned, and some Shell Recharge stations offer 100kW+ chargers.

4. 4

   Avoid power-sharing stalls

   Choose a charger pair where the adjacent stall is empty. This gives the EQB the full output of the charger.

5. 5

   Charge between 10% and 80%

   Plan stops to arrive between 10% and 15% and leave at 80%. This keeps you in the EQB's fastest charging window.

6. 6

   Check for software updates

   Mercedes releases over-the-air updates that can improve charging behavior. Check MBUX under Settings for available updates.

App shows "Available" but the charger is physically broken

The ChargePoint app shows a green status for a charger, but when you arrive, the unit is visibly damaged, has a blank screen, or displays an out-of-service message. This happens because ChargePoint's availability status depends on the charger reporting its own state, and a broken charger sometimes cannot report that it is broken.

Symptoms

• App shows the charger as available with a green icon
• Charger screen is blank, cracked, or showing an error message on site
• The connector is physically damaged or the cable is severed
• Other drivers at the station confirm the charger has been broken for days

How to Fix It

1. 1

   Check the other chargers at the same station

   ChargePoint stations often have multiple units. If one is broken, another unit nearby may work fine. Use the app to see all connectors at the location.

2. 2

   Report the broken charger in the ChargePoint app

   Open the station detail in the ChargePoint app, find the specific charger, and report the issue. Select the most accurate problem description. This updates the status for other drivers and alerts the station operator.

3. 3

   Check recent driver reports in the app

   The ChargePoint app sometimes shows recent check-ins or reports from other drivers. Before driving to a station, scroll down on the station detail page to see if anyone has reported issues recently.

4. 4

   Find the nearest alternative station

   In the ChargePoint app, tap "Find nearby" or zoom out on the map. Filter for DC fast chargers if you need speed. You can also check Google Maps or A Better Route Planner for non-ChargePoint alternatives.

RFID tap not registering

You tap your ChargePoint card on the reader and nothing happens. No beep, no screen change, no session. The RFID readers on ChargePoint stations can be finicky, especially on older European units.

Symptoms

• Tapping the RFID card produces no response from the charger
• The charger beeps but then shows "Authentication failed"
• The card works at some ChargePoint stations but not this one
• The RFID reader area is hard to locate on the charger

How to Fix It

1. 1

   Find the correct RFID reader location

   On ChargePoint stations, the RFID reader is sometimes in an unexpected spot. Look for a small RFID symbol, usually on the front face of the charger or near the screen. On some European units, it is on the side panel.

2. 2

   Hold the card flat and steady for three seconds

   Do not tap and pull away quickly. Press the card flat against the reader area and hold it still for a full three seconds. Some readers need this extra time.

3. 3

   Remove your card from any wallet or phone case

   If your ChargePoint card is in a wallet with other RFID cards or near your phone, interference can prevent the reader from detecting it. Hold the card alone against the reader.

4. 4

   Start the session from the ChargePoint app instead

   Open the ChargePoint app, find the station, select the specific charger, and tap "Start." This sends a start command over the network and does not rely on the physical RFID reader at all.

5. 5

   Check if your card is activated

   New ChargePoint RFID cards need to be activated in the ChargePoint app or on the website. Go to Account, then Cards, and verify your card is listed and active.

Session auto-terminates at 80%

Your charging session stops automatically when your battery reaches around 80%, even though you did not set a limit and wanted to charge further. Some ChargePoint stations, particularly those operated by local CPOs, have a configuration that ends sessions at 80% to free up the charger for the next driver.

Symptoms

• Charging stops at exactly 80% state of charge
• The ChargePoint app shows the session as "Complete" at 80%
• No error message on the charger, it simply stops
• Your car is still ready to accept more charge

How to Fix It

1. 1

   Check if this is a station policy

   Some station operators set an 80% cutoff on DC fast chargers to maximize charger availability. This is not a fault. Check the station detail in the ChargePoint app or look for signage at the station explaining time or charge limits.

2. 2

   Start a new session

   After the session ends at 80%, you can often start a new session on the same charger to continue charging. Unplug, wait 10 seconds, plug back in, and authenticate again.

3. 3

   Check your car's own charge limit

   Some EVs have a default charge limit set to 80% in the car's settings. Check your car's infotainment system under charging settings. If the limit is set to 80%, the car itself is stopping the session, not ChargePoint.

4. 4

   Switch to a different station if you need to charge above 80%

   If the 80% cutoff is a station policy and you need more charge, find a station without this restriction. AC chargers at destinations are usually a better choice for topping up above 80% because DC charging is very slow above that level anyway.

Waitlist feature not working

ChargePoint offers a waitlist feature that is supposed to notify you when a busy charger becomes available. In practice, the notifications are unreliable, especially at European stations.

Symptoms

• You joined the waitlist but never received a notification
• The notification arrived long after the charger became available
• The waitlist button is not available for some stations
• You received a notification but the charger was already taken by someone else

How to Fix It

1. 1

   Enable push notifications for the ChargePoint app

   Go to your phone's notification settings and make sure ChargePoint notifications are allowed. On iOS, check Settings, then Notifications, then ChargePoint. On Android, check App Info, then Notifications.

2. 2

   Stay within a reasonable distance of the station

   The waitlist is most useful when you are nearby, at a shop or restaurant within a few minutes of the charger. By the time you drive 15 minutes back to a station, the charger may already be taken again.

3. 3

   Do not rely solely on the waitlist

   Treat the waitlist as a nice-to-have, not a guarantee. Check the app manually every few minutes for availability updates, or look for an alternative station while you wait.

4. 4

   Check if the station supports the waitlist feature

   Not all ChargePoint stations have the waitlist enabled, particularly CPO-operated stations using ChargePoint hardware. If you do not see a waitlist option on the station page, the feature is not available there.

App interface confusing for European users

ChargePoint's app was designed primarily for the US market. European users sometimes encounter US-centric defaults, unfamiliar terminology, or features that do not apply in Europe.

Symptoms

• App defaults to miles instead of kilometers
• Pricing displayed in unexpected formats or currencies
• Filter options include connector types not used in Europe, like NACS
• Station details reference US-specific payment methods or loyalty programs
• Map loads centered on the US instead of your actual location

How to Fix It

1. 1

   Set your region and units in the app settings

   Open the ChargePoint app, go to Account or Settings, and look for region, language, or unit preferences. Set distance to kilometers and currency to your local currency.

2. 2

   Filter for CCS2 connectors

   When searching for stations, use the filter to show only CCS2 (the European DC fast charging standard). This hides US-only connector types from your results.

3. 3

   Check the station detail for European pricing

   Tap on a station to see the pricing breakdown. European ChargePoint stations typically show pricing in EUR, SEK, NOK, or GBP per kWh, sometimes with an additional per-minute fee after a certain duration.

4. 4

   Ignore US-specific features

   Features like ChargePoint Home integration or certain fleet management tools are designed for the US market. If something in the app does not seem relevant, it probably is not meant for European users.

CPO-operated station behaves differently than expected

Some stations use ChargePoint hardware and appear in the ChargePoint app, but they are owned and operated by a local charge point operator. These stations may have different pricing, access rules, or session limits than ChargePoint-owned stations.

Symptoms

• Pricing at the station does not match what you expected from ChargePoint
• Your ChargePoint account works but the session has unexpected restrictions
• The charger looks like ChargePoint but has another company's branding on it
• Customer support refers you to a different company for this station

How to Fix It

1. 1

   Check who operates the station

   In the ChargePoint app, the station detail page usually shows the operator or network name. If it says something other than ChargePoint, the station is CPO-operated and may have its own rules.

2. 2

   Read the pricing and terms on the station detail page

   CPO-operated stations set their own pricing. Check the ChargePoint app for the exact per-kWh rate and any time-based fees or session limits before you plug in.

3. 3

   Try the CPO's own app if ChargePoint authentication fails

   Some CPO stations accept ChargePoint cards but work more reliably with the operator's own app or RFID card. Look for the operator's name on the charger and download their app.

4. 4

   Contact the station operator for site-specific issues

   For problems like broken hardware, pricing errors, or access restrictions at a CPO-operated station, contact the operator directly. Their contact information is usually on the charger or in the station detail in the ChargePoint app.