Mercedes-Benz EQA Charging at Iberdrola

Mercedes-Benz EQA Charger Won't Start a Session

You connected the cable to your EQA's right rear charge port, but nothing happens. No charging animation on MBUX, no power flowing. This is one of the most frustrating situations at a public charger, but it is almost always fixable on the spot. The cause is usually authentication, cable locking, or the charger itself.

Symptoms

• CCS2 connector plugged in but MBUX shows no charging activity
• Charger screen shows an error or stays on the start screen after tapping
• Plug & Charge does not authenticate automatically at a supported station
• Charge port LED on the EQA does not turn on or blinks red
• Mercedes me app shows the car as connected but not charging

What to Do

1. 1

   Remove and reseat the CCS2 connector

   Pull the connector out of the right rear charge port. Inspect it for visible damage or debris. Push it back in firmly until you hear a click. The charge port LED should respond. If the cable feels loose or wobbly, the connector or port may be dirty.

2. 2

   Authenticate manually if Plug & Charge failed

   Open the charging network's app on your phone and start the session from there. Or tap your RFID card on the charger's reader. Plug & Charge is convenient but not universal. Many networks still require app-based or card-based authentication.

3. 3

   Check for scheduled charging in MBUX

   Open the charging settings in MBUX. If a departure time or scheduled charging window is active, disable it. At public chargers, you want charging to start immediately. Scheduled charging is designed for home use where off-peak electricity rates matter.

4. 4

   Lock and unlock the EQA, then try again

   Use the key or Mercedes me app to lock the car, wait 10 seconds, then unlock it. This resets the charge port locking mechanism and the onboard charging controller. Reconnect the cable after unlocking.

5. 5

   Try a different connector or charger

   If the station has multiple connectors, try another one. If the entire unit seems unresponsive, move to a different charger. Report the faulty charger through the network's app so other drivers know it is down.

Mercedes-Benz EQA Payment Failed at Charging Station

You are at a public charger with your EQA, but payment will not go through. The charger rejects your card, the app shows an error, or Plug & Charge just does not work. Payment problems are one of the most common reasons a charging session fails to start, and they are almost always fixable without leaving the station.

Symptoms

• Plug & Charge does not authenticate at a supported station
• Contactless bank card declined at the charger's payment terminal
• Charging app shows a payment error or insufficient balance
• RFID card not recognized by the charger's reader
• Charger starts the session but stops immediately with a billing error

What to Do

1. 1

   Try Plug & Charge first

   Simply plug the CCS2 connector into the EQA's right rear charge port. If Plug & Charge is activated in your Mercedes me account, the car and charger should authenticate automatically. Wait up to 30 seconds. If nothing happens, move to the next step.

2. 2

   Use the charging network's app

   Open the app for the specific charging network (the name is usually on the charger). Select the charger by scanning the QR code or entering the station ID. Start the session through the app. Make sure your payment method in the app is current.

3. 3

   Try contactless payment at the terminal

   Many newer chargers have a contactless payment terminal. Tap your bank card or phone (Apple Pay, Google Pay). If the terminal does not respond, it may be offline. Try a different card if you have one.

4. 4

   Check your Mercedes me Charge account

   Open the Mercedes me app and go to your Charge settings. Verify that a valid payment method is linked and that Plug & Charge is enabled. If your payment method expired recently, update it. Changes may take a few minutes to sync to the car.

5. 5

   Use a different RFID card or roaming provider

   If you have multiple charging cards, try another one. Roaming providers like Chargemap, Maingau, or Shell Recharge cover many networks across Europe. Having a second RFID card from a different provider is a reliable backup.

6. 6

   Move to a different charger or network

   If nothing works at this station, use MBUX navigation or the Mercedes me app to find another charger nearby. A different network may accept your payment method. Filter by the networks you know your cards work with.

Mercedes-Benz EQA Charging Slower Than Expected

You plugged in your EQA at a fast charger expecting close to 100 kW, but the MBUX display shows 30 kW. Or your home wallbox is delivering 3.6 kW instead of 11 kW. Slow charging on the EQA is rarely a defect. It is usually the battery temperature, your state of charge, or a setting in the Mercedes me app you can adjust quickly.

Symptoms

• DC fast charging speed well below the 100 kW maximum shown on MBUX
• AC home or destination charging stuck at 3-4 kW instead of 11 kW
• Charging speed drops sharply after reaching 60-70% state of charge
• Charging session starts at reasonable speed then slows within minutes
• MBUX display shows significantly lower power than the charger's rated output

What to Do

1. 1

   Route to the charger using MBUX navigation

   Enter the charging station as your destination in MBUX. This activates automatic battery preconditioning, which heats the 70.5 kWh battery pack to the ideal temperature range before you arrive. You will see a notification on the display confirming preconditioning is active. The EQA's heat pump makes this efficient even in cold weather.

2. 2

   Check your state of charge before plugging in

   For the fastest DC charging on the EQA, arrive between 10-20% state of charge. The 100 kW peak is available in this lower range. If you are already above 70%, the slower speed is expected and normal. Plan your stops accordingly on longer trips.

3. 3

   Verify the charger is not sharing power

   Look at the charging unit. If it has two CCS2 cables and someone is using the other one, you may be splitting the total capacity. Move to an unoccupied charger if available. Single-connector chargers avoid this problem entirely.

4. 4

   Check charging settings in MBUX or the Mercedes me app

   Open the charging settings in MBUX or the Mercedes me app. Make sure no departure time charging is active (this delays charging to finish just before departure). Confirm the charge current is set to maximum, not reduced. A reduced setting is the most common fix for slow home AC charging.

5. 5

   Check if Plug & Charge is working correctly

   The EQA supports Plug & Charge at compatible stations. If authentication failed and the charger defaulted to a lower power tier, unplug, wait 30 seconds, and reconnect at the charge port on the right rear side. Check MBUX for any error messages about authentication.

6. 6

   Try a different charger or restart the session

   If the speed is still low, unplug, lock and unlock the car, then plug in again. If that does not help, try a different charger entirely. Some chargers cannot deliver their rated power due to grid limitations or hardware degradation.

App defaults to Spanish

The Iberdrola app opens in Spanish regardless of your phone's language setting. Finding the language switch can be confusing if you do not read Spanish.

Symptoms

• All app text is in Spanish after installation
• Language setting is not obvious in the menus
• Error messages and charger instructions appear only in Spanish
• Switching your phone's language does not change the app

How to Fix It

1. 1

   Open the app settings and look for 'Idioma'

   'Idioma' means 'Language' in Spanish. It is usually under the profile or settings menu (gear icon). Tap it and select English or your preferred language.

2. 2

   Check the profile or account section

   Some versions of the Iberdrola app place the language selector inside the user profile rather than in general settings. Look for your name or account icon at the top of the screen.

3. 3

   Update the app to the latest version

   Iberdrola has been improving multi-language support. Older versions may not have your language available. Update from the App Store or Google Play.

4. 4

   Use a roaming app as a backup

   If the language barrier is too frustrating, roaming apps like Chargemap, Shell Recharge, or Electropass work at many Iberdrola stations and offer broader language support.

Contactless payment session timeout

After tapping your card on an Iberdrola charger, there is a short window to plug in the cable and start charging. If you take too long, the session times out and you need to tap again.

Symptoms

• You tapped your card but by the time you connected the cable, nothing happened
• Charger screen shows 'Session expired' or returns to the start screen
• You were charged a pre-authorization but no energy was delivered
• The charger seemed ready but then went back to idle

How to Fix It

1. 1

   Plug in the cable first, then tap your card

   At Iberdrola stations, connect the cable to your vehicle before tapping your contactless card. This gives the charger the best chance to start immediately after authentication.

2. 2

   Tap your card again and act quickly

   After the tap, you typically have 60 to 90 seconds to complete the connection. If you missed the window, tap again. The pre-authorization from the first attempt will be released.

3. 3

   Use the Iberdrola app instead

   The app does not have the same time pressure. You can connect the cable, open the app, select the charger, and start at your own pace.

4. 4

   Check your bank statement for ghost charges

   Failed contactless attempts may show a pre-authorization hold. These are not actual charges and typically release within 3 to 7 business days. Contact your bank if they persist.

Confusing signage at gas station locations

Some Iberdrola chargers are located at gas stations (Repsol, Cepsa, or others). The EV charging area may not be clearly separated from the fuel pumps, and signage can be confusing.

Symptoms

• You cannot find the EV chargers at the gas station
• GPS directs you to the fuel pumps instead of the charging area
• Signage points to 'carga' or 'recarga' but the direction is unclear
• The charging spots are behind the gas station building or in an overflow lot

How to Fix It

1. 1

   Look for the charging area separate from the fuel pumps

   EV chargers at gas stations are almost always in a dedicated area away from the fuel pumps. Look for tall charger cabinets (about 2 meters high) rather than fuel dispensers.

2. 2

   Drive past the fuel pump area

   The charging area is often behind the main building, in a side lot, or at the far end of the property. Drive through the station slowly and look for the Iberdrola or charging network signage.

3. 3

   Ask the gas station attendant

   If the station has staff, ask where the electric charging points are. In Spanish, 'Donde estan los cargadores electricos?' gets the point across.

4. 4

   Check the Iberdrola app for station photos

   The station detail page in the Iberdrola app sometimes includes photos or access instructions that help you find the chargers within a larger gas station complex.

Mix of slow and fast chargers at the same station

Some Iberdrola stations have both AC chargers (7 to 22 kW) and DC fast chargers (50 to 350 kW) next to each other. It is easy to plug into a slow charger by mistake if you are not paying attention.

Symptoms

• You expected fast charging but your dashboard shows only 7 or 22 kW
• The charger you plugged into looks smaller than the others at the station
• You used a Type 2 cable instead of a CCS2 connector
• The charging session is going to take hours instead of minutes

How to Fix It

1. 1

   Check the charger label for power output

   Iberdrola chargers display their rated power (e.g., 50 kW, 150 kW, 350 kW) on the unit. Look for this label before plugging in. AC chargers (7 to 22 kW) are typically smaller and have Type 2 sockets.

2. 2

   Use the CCS2 connector for fast charging

   The CCS2 connector is the large combined plug for DC fast charging. If you used the smaller Type 2 plug (round with pins), you are on AC and will charge slowly.

3. 3

   Check the Iberdrola app for charger details

   The app shows each charger unit's power level at a station. Before plugging in, confirm which unit is the high-power DC charger.

4. 4

   Unplug and move to the fast charger

   If you accidentally started an AC session, stop the session in the app, unplug, and move to the DC fast charger. You will not be charged a penalty for a short session.

Power delivery varies by time of day

Some Iberdrola stations deliver noticeably less power during peak grid hours (typically early evening). This is due to grid constraints, not a charger fault.

Symptoms

• Charging speed is significantly lower in the evening than the same station delivered in the morning
• Speed starts high but drops during peak hours even at low battery levels
• Other vehicles at the station also show reduced speeds at the same time
• The charger does not reach its rated power despite your vehicle supporting it

How to Fix It

1. 1

   Check your battery level first

   The most common reason for reduced charging speed is a battery above 60 to 80% state of charge. Your vehicle limits the charging rate at higher battery levels regardless of the charger's capability.

2. 2

   Try charging during off-peak hours

   If your schedule allows, charge during late evening (after 10 PM) or early morning. Grid demand is lower and the station can deliver its full rated power.

3. 3

   Check for power sharing between chargers

   If multiple chargers are in use at the same station, they may share a grid connection. Charging when fewer vehicles are plugged in can improve your speed.

4. 4

   Try a different station nearby

   Not all Iberdrola stations have the same grid connection. A station a few kilometers away may have a better power supply and deliver higher speeds during peak hours.

5. 5

   Accept the reduced speed if you are above 60%

   If your battery is above 60%, the speed reduction is mostly from your vehicle's battery management, not the grid. This is normal and protects your battery's long-term health.