Can the Leapmotor C10 charge at Wenea?

Yes. The Leapmotor C10 uses a CCS2 connector, which is supported by Wenea chargers. Maximum charging speed will be up to 84 kW.

How long does it take to charge a Leapmotor C10 at Wenea?

Charging a Leapmotor C10 from 10% to 80% at Wenea takes approximately 50 minutes at up to 84 kW. Actual times vary depending on temperature, battery condition, and station load.

How do you pay at Wenea?

Wenea accepts app, contactless. Check the Wenea app or website for current pricing and subscription options.

This guide is for general information only. EVcourse is not affiliated with Leapmotor or Wenea. Charging speeds and compatibility vary by station, vehicle variant, and conditions. When in doubt, contact Leapmotor or Wenea support.

Troubleshooting

Leapmotor C10 Charging at Wenea

Updated March 2026

The Leapmotor C10 is compatible with Wenea chargers. Here is what you need to know about charging speed, connector fit, and how to handle common problems.

Compatibility Overview

Approximate values. Actual speeds depend on temperature, battery state, and station load.

Connector match: Compatible
Car connector: CCS2
Network connectors: CCS2
Max charging speed: up to ~84 kW
10-80% estimate: ~50 min
Payment: app, contactless

Why Your Charging Speed May Differ

The Leapmotor C10 supports up to 84 kW DC charging. Wenea chargers deliver up to 400 kW. Your car's maximum intake is the limiting factor here, capping speed at 84 kW even on a faster charger.

Charging slows down above 80% state of charge on most EVs, including the Leapmotor C10.
Cold weather reduces charging speed. If your Leapmotor C10 supports battery preconditioning, use the built-in navigation to warm the battery before arriving.
If multiple cars share the same Wenea station, power may be split between stalls.

Detailed troubleshooting for the Leapmotor C10 at Wenea is coming soon. In the meantime, check our general troubleshooting guide or open the EVcourse app for step-by-step help at the charger.

Frequently Asked Questions

Can the Leapmotor C10 charge at Wenea?: Yes. The Leapmotor C10 uses a CCS2 connector, which is supported by Wenea chargers. Maximum charging speed will be up to 84 kW.
How long does it take to charge a Leapmotor C10 at Wenea?: Charging a Leapmotor C10 from 10% to 80% at Wenea takes approximately 50 minutes at up to 84 kW. Actual times vary depending on temperature, battery condition, and station load.
How do you pay at Wenea?: Wenea accepts app, contactless. Check the Wenea app or website for current pricing and subscription options.

Related scenarios

Don't understand the screen? Scan it.

Point your phone at any charger or car screen for instant help. Any brand, any language. Free to try on iOS.

Download on the App Store

Free to try on iOS. Android coming soon. Join the Android waitlist.