Kia EV6 Charging at Mer

Kia EV6 Charger Won't Start? Troubleshooting Guide

You have plugged the CCS2 cable into your Kia EV6's right rear charge port, but nothing happens. No lights, no confirmation on the curved display, no charging. This is frustrating, but it is rarely a car defect. Most failed charging starts come down to authentication, a locked charge port, utility mode being on, or the charger itself having an issue.

Symptoms

• CCS2 or Type 2 cable plugged in but no charging indicator on the dashboard
• Charge port LED stays off or flashes red
• Charger screen shows an error or stays on the start screen
• Kia Connect app shows the car as not connected to a charger
• Charging session begins but stops within seconds

What to Do

1. 1

   Check the charge port door and cable connection

   Open the charge port door on the right rear fender. In cold weather, the door can be stiff. Gently press and release to open it fully. Insert the CCS2 connector firmly until you hear a click. The charge port LED should light up.

2. 2

   Turn off utility mode

   On the EV6's infotainment screen, go to EV settings. Make sure utility mode or V2L mode is turned off. This mode is for powering external devices and blocks normal charging.

3. 3

   Authenticate with the charger

   Tap your RFID card, open the charging network's app, or use contactless payment. If the EV6's Plug & Charge is set up, the session should start automatically. If Plug & Charge does not work, fall back to the app or RFID card.

4. 4

   Check for a charging schedule

   On the infotainment screen, go to EV settings, then Scheduled Charging. If a schedule is active, either disable it or tap 'Charge Now' to override. You can also check this in the Kia Connect app.

5. 5

   Unplug, wait 30 seconds, and try again

   Disconnect the cable completely, wait 30 seconds, then plug in again and re-authenticate. This resets both the car and the charger's session state.

6. 6

   Try a different charger

   If the session still will not start, the charger may be faulty. Try another charger at the same station or a different station entirely. Report the broken charger through the charging network's app.

Kia EV6 Payment Failed at the Charger? How to Fix It

You are at a public charger with your Kia EV6, the cable is plugged in, but the charger will not start because payment failed. Your RFID card was not recognized, the app shows an error, or the contactless terminal is not responding. The EV6 supports Plug & Charge, which can bypass these issues entirely, but when it does not work, you need a backup plan. Here is how to get past payment problems and start charging.

Symptoms

• Charger screen shows 'payment declined' or 'authorization failed'
• RFID card tap does not register on the charger's reader
• Charging network app shows an error when trying to start the session
• Plug & Charge does not activate automatically after plugging in
• Contactless card terminal times out or shows an error

What to Do

1. 1

   Check your account in the charging network's app

   Open the charging network's app on your phone. Check that your payment method is valid and not expired. If needed, add a new card. Some networks also let you add PayPal or direct debit as alternatives.

2. 2

   Try starting the session from the app

   Instead of tapping an RFID card, use the network's app to scan the charger's QR code or enter its station ID. Starting from the app sometimes works when physical authentication fails.

3. 3

   Try a different payment method

   If RFID does not work, try contactless payment at the terminal. If the terminal is down, try the app. If the app does not work, try a different RFID card from another provider. Having two or three payment options covers most situations.

4. 4

   Check if Plug & Charge is active

   In the Kia Connect app, check your Plug & Charge settings. Make sure it is enabled and linked to a valid charging account. If the charger supports Plug & Charge, the session should start automatically when you connect the CCS2 cable.

5. 5

   Try a different charger

   If all payment methods fail at this charger, the charger's payment system may be offline. Move to a different charger at the same station or find another station nearby. Use the Kia EV6's navigation or a charger finder app to locate alternatives.

Kia EV6 Charging Slower Than Expected? Quick Fixes

You plugged in your Kia EV6 expecting ultra-fast 800V charging and the screen shows 50 kW. Or your home wallbox is stuck at 3 kW instead of 11 kW. The EV6's 800V architecture can hit 233 kW and charge 10-80% in about 18 minutes, but only when conditions are right. Slow charging is almost never a defect. It is usually the battery temperature, the charger itself, or a setting you can fix quickly.

Symptoms

• DC fast charging speed well below the 233 kW maximum
• AC home charging stuck at 3-4 kW instead of 11 kW
• Charging speed drops sharply after reaching 60-70%
• Charging session starts fast but slows down within minutes
• Dual 12.3-inch display shows much lower power than the charger's rated output

What to Do

1. 1

   Check the battery temperature

   Look at the charging information on the curved display. If the battery is cold, use the EV6's preconditioning feature. Set a DC fast charger as your destination in navigation, and the car will warm the battery on the way. You can also trigger preconditioning through the Kia Connect app.

2. 2

   Check the charger voltage

   The EV6 can charge on both 400V and 800V chargers, but peak speed differs. Look at the charger's screen or label to see if it is 400V or 800V. For the fastest speeds, look for 800V chargers rated 250 kW or higher.

3. 3

   Check your state of charge

   If you are above 80%, the slower speed is completely normal. For the fastest DC charging, arrive between 10-20% and charge to 80%. The EV6's 18-minute 10-80% time assumes this range.

4. 4

   Verify the charger is not sharing power

   Look at the charger unit. If two cables come from the same cabinet and someone is using the other one, you may be splitting power. Move to an unoccupied charger if one is available.

5. 5

   Check the AC charge current setting

   On the EV6's infotainment screen, go to EV settings, then Charging. Make sure the AC charge current is set to maximum. You can also check this in the Kia Connect app under charging settings.

6. 6

   Make sure utility mode is off

   The EV6's V2L (vehicle-to-load) feature uses utility mode. If utility mode is active, it can interfere with normal charging. Turn it off in the EV settings before plugging in.

Station occupancy not updating in the app

The Mer app shows a station as available, but when you arrive, all connectors are occupied or out of service. The real-time status in the app can lag behind by several minutes.

Symptoms

• App shows "Available" but all connectors are in use when you arrive
• App shows a station as occupied but the chargers are visibly free
• Connector status flickers between available and occupied in the app
• Recently freed connectors still show as "In use" in the app for several minutes

How to Fix It

1. 1

   Pull to refresh the station detail in the Mer app

   On the station page, pull down to force a status refresh. The app does not always update automatically, and a manual refresh often shows the correct status.

2. 2

   Close and reopen the app

   Force-close the Mer app and reopen it. This clears any cached station data and pulls a fresh status from the server.

3. 3

   Check a third-party app for a second opinion

   Apps like Plugsurfing, A Better Route Planner, or Google Maps sometimes pull fresher data from Mer's backend. Use one of these to verify availability if the Mer app seems wrong.

4. 4

   Drive to the station if it is nearby

   If the station is less than five minutes away, it is often faster to just go and check. Occupancy can change in the time it takes to troubleshoot the app.

Third-party RFID card rejected

You are trying to authenticate with an RFID card from a roaming provider like Plugsurfing, NewMotion, or Virta, but the Mer charger rejects it. Not all third-party RFID cards are accepted at every Mer station.

Symptoms

• Charger screen shows "Card not recognized" after tapping
• The charger beeps once but nothing happens
• Your RFID card works at other networks but fails at Mer
• The charger prompts you to try again but repeated taps do not help

How to Fix It

1. 1

   Hold the card flat against the reader for three full seconds

   Do not tap and remove quickly. Some Mer readers need a longer hold to register the card. Keep it pressed flat against the RFID symbol.

2. 2

   Check if your roaming provider covers Mer stations

   Open your roaming provider's app and search for this specific Mer station. Some providers have roaming agreements with Mer but not for every station type or region.

3. 3

   Use the Mer app instead

   Download the Mer app if you do not have it. Create an account and add a payment method. You can start the session through the app even if your RFID card does not work.

4. 4

   Try contactless bank card payment

   Newer Mer stations have a contactless payment terminal. Look for a card reader with the contactless payment symbol. Tap your bank card or phone to start.

5. 5

   Try a Mer-issued RFID card for future visits

   You can order an RFID card directly from Mer through their app or website. Mer's own cards are accepted at all Mer stations without roaming issues.

Charger screen showing error but no error code

The charger screen displays a generic error message like "Error" or "Fault" without any specific code or explanation. This makes it hard to know if the problem is temporary or if the unit is broken.

Symptoms

• Charger screen shows "Error" or a red warning icon with no further detail
• The error appears before you even try to authenticate
• The error appears after plugging in but before power delivery starts
• Screen alternates between the normal start screen and the error message

How to Fix It

1. 1

   Unplug the connector and wait 30 seconds

   Some Mer chargers show transient errors after a previous session ended abnormally. Unplugging and waiting gives the charger time to reset its internal state.

2. 2

   Try the other connector on the same unit

   If the station has a second CCS2 connector, try that one. A hardware fault on one connector does not always affect the other.

3. 3

   Check if other cars are successfully charging at the station

   If nobody at the station is charging, the entire station may be down. If others are charging fine, the issue is limited to your connector.

4. 4

   Report the faulty unit in the Mer app

   Open the Mer app, find the station, and report the issue. Include which connector number has the error. This helps Mer send a technician and warns other drivers.

5. 5

   Move to a different station

   A charger with a persistent generic error is unlikely to start working on its own. Use the Mer app to find the nearest alternative station.

Cable locked and will not release in cold weather

You finished charging but the CCS2 cable will not unlock from your car. In Nordic winters, ice can form around the connector locking mechanism, making it physically difficult to release.

Symptoms

• Pressing the connector release button does not unlock the cable
• The connector feels frozen in place
• Your car shows "Charging complete" but the cable is stuck
• The locking pin on the connector is visibly iced over

How to Fix It

1. 1

   Make sure the charging session has fully ended

   The cable stays locked while a session is active. Stop the session in the Mer app or on the charger screen, then try releasing the connector again. Wait 10 seconds after the session ends.

2. 2

   Try unlocking from your car

   Most EVs have a cable release option in the infotainment system or a button near the charge port. Use your car's unlock function rather than the connector button.

3. 3

   Warm the connector gently

   If ice is the problem, pour lukewarm water (not boiling) over the connector and charge port area. You can also cup your hands around the connector to warm it with body heat. Do not use force or tools to pry it free.

4. 4

   Run the car's cabin heater for a few minutes

   Turning on the car's climate system can gradually warm the charge port area from the inside. This works slowly but can free a mildly frozen connector after 5-10 minutes.

5. 5

   Call Mer support if the cable is truly stuck

   If nothing works after 15 minutes, call the support number on the charger. Mer can remotely release the cable lock on their end. Do not pull with excessive force as this can damage both the connector and your car's charge port.

App requires location services for remote start

The Mer app asks you to enable location services before you can start a charging session, even when you are standing right next to the charger and selected it manually from the map.

Symptoms

• App shows "Enable location services to start charging" popup
• Start button is grayed out until location permission is granted
• The app worked fine before but now demands location after an update
• You can browse the map but cannot start a session without GPS enabled

How to Fix It

1. 1

   Enable location services temporarily

   Go to your phone's settings, find the Mer app, and set location access to "While Using the App." You can change it back after your session.

2. 2

   Make sure GPS has a fix

   In underground parking garages or areas with poor GPS reception, the app may not be able to confirm your location. Step outside or move closer to an open area until the app detects your position.

3. 3

   Use RFID or contactless payment instead

   If you do not want to share your location, use your RFID card or a contactless bank card to start the session. These methods do not require the app at all.

4. 4

   Scan the QR code on the charger

   Some Mer chargers have a QR code that opens the start process in a browser, bypassing the app's location requirement.

Former Grønn Kontakt station not found in Mer app

Mer acquired Grønn Kontakt in Norway, but some older stations may not appear correctly in the Mer app, especially during the transition period.

Symptoms

• Station visible on the street but not on the Mer app map
• Searching by the old Grønn Kontakt name returns no results
• QR code on the charger links to a Grønn Kontakt page that no longer works
• RFID card from Grønn Kontakt account rejected

How to Fix It

1. 1

   Update the Mer app to the latest version

   Older versions of the app may not include recently migrated Grønn Kontakt stations. Update from the App Store or Google Play.

2. 2

   Search by the station's physical address

   Instead of searching by station name, try the street address or zoom into the location on the app map. The station may appear under a new Mer name.

3. 3

   Enter the charger ID manually

   Look for a station or connector ID printed on the charger hardware. Enter this ID in the Mer app's manual start option.

4. 4

   Use contactless payment to bypass the app

   If the station has a payment terminal, tap your bank card to start. This works independently of whether the app has the station listed.