Kia EV3 Charging at Be.EV

Kia EV3 Charger Won't Start: Troubleshooting Steps

You have plugged in your Kia EV3, but the charger is not starting. No power, no progress bar, just silence. This is one of the most common problems at public charging stations, and it usually has a simple fix.

Symptoms

• The charger display stays on 'connect vehicle' or 'waiting' after plugging in
• The infotainment display does not show any charging activity
• The EV3's charge port light does not illuminate or blinks without starting
• The charger shows an error code immediately after connection
• The CCS2 connector feels loose in the port

What to Do

1. 1

   Unlock the car and open the charge port

   Make sure the EV3 is unlocked. Press the charge port door to open it fully. The port is typically on the rear of the car.

2. 2

   Push the connector in firmly

   Insert the CCS2 or Type 2 connector straight into the port until it clicks and locks. Do not angle it. A solid connection triggers the handshake protocol.

3. 3

   Start the session at the charger

   Tap your RFID card, open the charging network app, or use contactless payment. The charger needs authentication before delivering power to your EV3.

4. 4

   Check EV settings on the infotainment display

   Look for any scheduled charging settings or charge limits that might prevent immediate charging. Disable any schedules if you want to charge now.

5. 5

   Unplug and reconnect

   Remove the cable, wait 10 seconds, and plug in again. This resets the communication between the EV3 and the charger.

6. 6

   Try a different charger

   If the issue persists, the charger is likely faulty. Move to another stall or a different station. Report the broken charger in the network's app.

Kia EV3 Charging Payment Rejected: How to Fix Fast

Your Kia EV3 is plugged in, but the charger will not accept your payment. The RFID card is ignored, the app shows an error, or your bank card is declined. This is not an EV3 issue, but it still keeps you from charging. Here is how to resolve it.

Symptoms

• The charger displays 'payment declined' or 'authentication failed'
• Your RFID card gets no response when tapped on the reader
• The charging app shows a payment error when starting a session
• Contactless bank card payment is rejected at the charger terminal
• The charger asks for payment but you cannot find a method that works

What to Do

1. 1

   Try a different payment method

   If your RFID card fails, switch to the charging app. If the app fails, try a contactless bank card. Most European chargers support at least two payment options.

2. 2

   Check your account and payment details

   Open the charging app and verify your payment method is current. For prepaid accounts, check your balance. For subscription services, confirm your plan is active.

3. 3

   Look for supported networks on the charger

   Check the charger for logos of accepted providers (Ionity, Shell Recharge, Allego, etc.). If your provider is not listed, you will need ad-hoc payment.

4. 4

   Scan the QR code for ad-hoc payment

   Most European chargers now have a QR code. Scan it with your phone to open a web-based payment page where you can pay with any bank card, no app required.

5. 5

   Cancel and retry the session

   If payment appeared to work but charging did not start, cancel the session in the app and try again. A fresh authorization often resolves the issue.

6. 6

   Call the network support number

   The charger should display a support phone number. The operator can sometimes start a session remotely or identify the specific payment problem.

Kia EV3 Long Range Charging Slow: Causes and Fixes

You expected your Kia EV3 Long Range to charge quickly, but the power on the infotainment display is much lower than 135kW. On a trip where every minute counts, this is frustrating. The good news is that most causes of slow charging are avoidable once you understand what affects speed.

Symptoms

• DC charging power shown on the infotainment display is well below 135kW
• Estimated charge time for the 78kWh battery is much longer than expected
• Charging speed drops significantly above 70% state of charge
• AC home or destination charging is stuck below 11kW
• The infotainment display shows a battery temperature or preconditioning message

What to Do

1. 1

   Check charging power on the infotainment display

   The EV3's infotainment screen shows current kW, battery percentage, and estimated time. Compare the kW figure to the charger's rated output to determine the bottleneck.

2. 2

   Activate battery preconditioning

   Set the charging station as your destination in the EV3's navigation system. The car will automatically warm the battery to optimal temperature while driving, significantly improving initial DC charging speed.

3. 3

   Verify the charger's maximum output

   Check the label on the charger unit or the network app for the station's rated power. A 50kW charger cannot deliver 135kW regardless of your car's capability.

4. 4

   Avoid shared stalls

   At stations with paired CCS2 connectors, choose a pair where the other stall is free. This gives your EV3 access to the full power output.

5. 5

   Charge between 10% and 80%

   Plan your stops to arrive low and leave at 80%. This keeps you in the fastest charging range and saves time compared to topping up to 100%.

6. 6

   Update the car's software

   Kia periodically releases updates that improve charging performance. Check the infotainment display for available software updates or visit your Kia service centre.