Skip to main content

This guide is for general information only. EVcourse is not affiliated with Fiat or REWE Charging. Charging speeds and compatibility vary by station, vehicle variant, and conditions. When in doubt, contact Fiat or REWE Charging support.

Troubleshooting

Fiat 500e Charging at REWE Charging

Updated March 2026

The Fiat 500e is compatible with REWE Charging chargers. Here is what you need to know about charging speed, connector fit, and how to handle common problems.

Share

Compatibility Overview

Approximate values. Actual speeds depend on temperature, battery state, and station load.

Connector match
Compatible
Car connector
CCS2
Network connectors
CCS2
Max charging speed
85 kW
10-80% estimate
25 min
Payment
app, contactless

Why Your Charging Speed May Differ

The Fiat 500e supports up to 85 kW DC charging. REWE Charging chargers deliver up to 300 kW. Your car's maximum intake is the limiting factor here, capping speed at 85 kW even on a faster charger.

  • Charging slows down above 80% state of charge on most EVs, including the Fiat 500e.
  • Cold weather reduces charging speed. Preconditioning may not be available on all Fiat 500e variants.
  • If multiple cars share the same REWE Charging station, power may be split between stalls.

Fiat 500e Charging Problems

Fiat 500e Charger Won't Start? Try These Fixes Now

You have plugged your Fiat 500e into a charger and nothing happens. No power, no session, maybe just an error on the screen. Whether you are at a DC fast charger or an AC station, the causes are usually the same. Here is what to check.

Symptoms

  • CCS2 connector plugged in but no charging session starts
  • Charger screen shows an error message or failed connection
  • The 500e's charge port light does not respond or blinks red
  • Charger initializes but disconnects after a few seconds
  • Type 2 connector locks in at an AC charger but no power flows

What to Do

  1. 1

    Complete the payment or authentication

    Tap your RFID card, start a session in the network app, or use contactless payment at the terminal. Follow the charger's on-screen instructions for the correct order.

  2. 2

    Unplug and firmly reseat the connector

    Remove the CCS2 or Type 2 connector completely. Reinsert it straight into the 500e's charge port on the right rear side. Push firmly until you feel or hear the click.

  3. 3

    Disable any charging schedule

    Check the 500e's infotainment system for scheduled charging settings. Turn them off so the car accepts power immediately when connected at a public charger.

  4. 4

    Inspect and clean the charge port

    Look inside the charge port for dirt, debris, or ice. Clean the contacts gently with a dry cloth. In freezing conditions, clear any ice from the port and the port door.

  5. 5

    Lock and unlock the car to reset

    Use the key fob or the Fiat app to lock the 500e, wait 10 seconds, then unlock it. This resets the charge port communication. Try plugging in again.

  6. 6

    Try a different charger

    If the problem persists, move to another stall or a nearby station. Some charger faults are specific to one unit.

Fiat 500e: Charger Payment Not Working? Fix It Now

You are at the charger with your Fiat 500e, ready to go, but the payment will not process. RFID rejected, app failing, or bank card declined. This is a charger-side issue, not something wrong with your car. Here is how to get past it.

Symptoms

  • RFID card rejected with an error beep or on-screen message
  • Charging network app shows a payment error or cannot start the session
  • Contactless bank card declined at the charger terminal
  • Pre-authorization hold on your bank account but no session starts
  • Charger starts briefly then stops citing a billing error

What to Do

  1. 1

    Check accepted payment methods

    Look at the charger's display and body for payment method logos. Identify which RFID networks, apps, and card payment options are supported.

  2. 2

    Try a different payment method

    If RFID fails, try the network app. If the app fails, try a contactless bank card. Having two backup options prevents being stuck without a charge.

  3. 3

    Check your card balance and limits

    Verify in your banking app that you have enough available balance for the pre-authorization hold. Some chargers hold up to 80 EUR temporarily.

  4. 4

    Update or restart the charging app

    Check for app updates, close and reopen the app, and look for any stuck open sessions. Log out and log back in if the error continues.

  5. 5

    Use the built-in card reader if available

    Look for a contactless card terminal on the charger. Direct bank card payment bypasses RFID and app issues.

  6. 6

    Call the charger support number

    The phone number is on every public charger. The operator can sometimes start a session remotely or diagnose the payment problem.

Fiat 500e Charging Too Slow? Here Is How to Fix It

Your Fiat 500e can charge at up to 85 kW on a DC fast charger, which is modest by modern standards. With a smaller 37.3 kWh NMC battery optimized for city driving, the charging curve behaves differently than larger EVs. Here is what limits your speed and how to get the most from each session.

Symptoms

  • DC charging power stays well below 85 kW even at a high-power station
  • Charging speed drops sharply before reaching 50% state of charge
  • Home AC charging maxes out at 3.6 kW instead of 11 kW
  • The dashboard shows a much longer estimated time than expected
  • Cold weather charging is noticeably slower than in warmer months

What to Do

  1. 1

    Drive for 15-20 minutes before fast charging

    The 500e has no preconditioning, so driving at higher speeds before your charging stop is the only way to warm the battery. This is critical in winter when cold batteries charge much more slowly.

  2. 2

    Arrive at the charger with a low state of charge

    The 500e's small battery charges fastest between 5% and 40%. Arrive around 10-15% for peak speeds. With only 37.3 kWh, the fast charging window is smaller than on larger EVs.

  3. 3

    Choose an unshared charger stall

    Look for a stall where the paired CCS2 connector is not in use. This gives you the full charger output. Some stations label paired stalls with A and B.

  4. 4

    Check your home AC connection

    Look at the charging power shown on the 500e's display during a home charge. If it reads 3.6 kW, you have single-phase power. Three-phase unlocks 11 kW and makes daily charging much more convenient.

  5. 5

    Monitor the charging display

    Watch the power reading during DC charging. If it starts very low, the battery is cold. Power should increase over the first 5-10 minutes as the battery warms up during the session.

  6. 6

    Charge to 80% and go

    With a 37.3 kWh battery, the difference between 80% and 100% on DC is small in kWh but takes a long time. In most daily scenarios, 80% gives you plenty of range for a city car.

Common REWE Charging Issues

Charger occupied by non-charging vehicles

You arrive at the REWE charger and a car is parked in the charging spot without being plugged in. This is common at supermarket locations where shoppers treat EV spots as regular parking.

Symptoms

  • Charging spot is occupied by a car with no cable connected
  • ICE vehicle parked in the EV charging bay
  • Car is plugged in but session has clearly ended and the driver is inside shopping
  • All charging spots taken despite the app showing the charger as available

How to Fix It

  1. 1

    Check if the other car is actively charging

    Look at the charger display or connector. If the session has ended and the car is just parked, REWE cannot remotely move it. The app status reflects the charger, not the parking spot.

  2. 2

    Ask at the REWE customer service desk

    REWE staff can sometimes make a store announcement asking the vehicle owner to move. This works more often than you would expect.

  3. 3

    Wait briefly or shop first

    At supermarket chargers, turnover is high. Most shoppers leave within 30 to 45 minutes. Do your shopping and check again.

  4. 4

    Check for additional REWE locations nearby

    Many German cities have multiple REWE stores with chargers within a short drive. Check the app for the next closest option.

Contactless card reader not responding

You tap your debit or credit card on the reader but nothing happens. The reader does not beep, does not show a light, or shows an error briefly before resetting.

Symptoms

  • Card reader shows no response when you tap
  • Reader beeps but the screen shows an error
  • Card works at the REWE checkout inside but not at the charger
  • Contactless symbol is visible on the reader but it seems inactive

How to Fix It

  1. 1

    Hold your card flat against the reader for 3 to 5 seconds

    Some REWE charger readers are slower than store payment terminals. Hold the card still and wait for the full processing time.

  2. 2

    Remove your phone and other cards from the area

    If you hold your wallet with multiple contactless cards near the reader, it may detect interference and reject the transaction.

  3. 3

    Try the charging app instead

    If contactless is not working, start the session through the REWE charging partner app. This bypasses the physical card reader entirely.

  4. 4

    Check if the reader is physically damaged

    Supermarket chargers are exposed to shopping carts, weather, and heavy foot traffic. If the reader looks cracked or the screen is damaged, report it to REWE staff inside and try another stall if available.

Session ends due to maximum stay time limit

Your charging session stops before the battery is full because REWE enforces a maximum parking time at the charging spot. This exists to keep spots available for other shoppers.

Symptoms

  • Charging stops after 60 to 90 minutes even though the battery is not full
  • App notification says session ended due to time limit
  • You return from shopping to find the charger disconnected
  • Charger screen shows session completed despite low battery level

How to Fix It

  1. 1

    Check the posted time limit before you start

    REWE typically allows 60 to 120 minutes depending on the location. Look for signage near the charger or check the app for time restrictions at that specific store.

  2. 2

    Plan your charge around your shopping time

    At up to 300 kW, most EVs can gain 150 to 250 km of range in 30 to 45 minutes. A normal grocery run is usually enough time for a meaningful charge.

  3. 3

    Move your car if you need more time

    If you need a longer session, move your car to a regular parking spot after the time limit and start a new session if the charger is free when you return.

  4. 4

    Use REWE chargers for top-ups, not full charges

    Supermarket chargers work best for adding range while you shop, not for charging from 10% to 100%. If you need a full charge, plan for a dedicated fast charging station.

Poor mobile signal in underground or garage parking

Some REWE stores have chargers in basement or covered parking areas where mobile signal is weak. This can prevent the app from starting a session or processing contactless payments.

Symptoms

  • App shows 'No connection' or spins without loading
  • Contactless payment times out during processing
  • You cannot scan the QR code on the charger because the page will not load
  • Session starts but the app loses connection and cannot show charging status

How to Fix It

  1. 1

    Connect to REWE store WiFi if available

    Many REWE stores offer free WiFi that may reach the parking area. Check for a REWE network in your phone's WiFi settings.

  2. 2

    Walk closer to the garage entrance to start the session

    If you need the app to start the session, walk toward the exit where signal is stronger, start the session remotely, then return to your car.

  3. 3

    Use contactless payment instead of the app

    Contactless card payments are processed through the charger's built-in connection, not your phone. If the card reader works, you do not need mobile signal.

  4. 4

    Pre-load the app before entering the garage

    Open the app and navigate to the station page while you still have signal. Some apps cache enough data to start a session even with intermittent connectivity.

Charger unavailable outside store hours

You arrive at a REWE charger outside store opening hours and the charger is inaccessible or powered down. Some locations gate their parking areas or shut down chargers when the store closes.

Symptoms

  • Parking area gate is locked and you cannot reach the charger
  • Charger screen is dark and does not respond
  • App shows the charger as available but the physical location is closed
  • Barrier arm blocks entry to the parking lot after closing time

How to Fix It

  1. 1

    Check store hours before planning a charge

    REWE stores in Germany typically close between 20:00 and 22:00 on weekdays and earlier on Saturdays. Most are closed on Sundays. If the charger is behind a gate, you cannot access it outside these hours.

  2. 2

    Verify 24/7 access in the app

    Some REWE charging locations offer 24/7 access even when the store is closed. Check the station details in the app. If it does not mention 24-hour access, assume it follows store hours.

  3. 3

    Leave the parking area before the store closes

    If you are charging and the store is about to close, make sure you can exit the parking area. Some locations lock the barrier after closing, which could trap your car overnight.

  4. 4

    Find an alternative nearby charger

    Use a multi-network app like Chargemap or the EVcourse charger finder to locate a 24/7 charger nearby. Dedicated charging stations along main roads usually operate around the clock.

REWE Charging App Tips

  • REWE chargers are often operated by a charging partner (such as Allego or EWE Go). Check which app you actually need by scanning the QR code on the charger or looking at the operator logo.
  • Pre-load the station page in the app before entering a parking garage. Underground signal issues are common at REWE locations.
  • Enable session end notifications so you can move your car promptly and avoid blocking the spot for other shoppers.
  • Check the app for time limits at each specific REWE location. They vary by store and are not always posted clearly on signage.
  • If the app is not working, look for a phone number on the charger itself. The charging operator (not REWE) handles technical support.

Payment Tips

  • Contactless debit and credit cards usually work at REWE chargers without needing an app or account. Look for the contactless symbol on the card reader.
  • Pre-authorization holds can be up to 100 EUR depending on the operator. The actual charge amount replaces the hold within a few business days.
  • Some REWE charging operators offer roaming through networks like Hubject or Gireve. Your existing charging card or app from another network may work here.
  • Keep your payment card handy, not buried in your shopping bags. If the session stops unexpectedly, you may need to re-authenticate quickly.

Frequently Asked Questions

Can the Fiat 500e charge at REWE Charging?
Yes. The Fiat 500e uses a CCS2 connector, which is supported by REWE Charging chargers. Maximum charging speed will be up to 85 kW.
How long does it take to charge a Fiat 500e at REWE Charging?
Charging a Fiat 500e from 10% to 80% at REWE Charging takes approximately 25 minutes at up to 85 kW. Actual times vary depending on temperature, battery condition, and station load.
How do you pay at REWE Charging?
REWE Charging accepts app, contactless. Check the REWE Charging app or website for current pricing and subscription options.

Stuck at the charger? Open the app.

Step-by-step help for real charging problems. Log the experience. Free on iOS and Android.

Free to download · Available on iOS and Android